工业废水中多金属离子的吸附净化

以含有Si、Al、Ca、C元素的矿物材料作为基质,经特定条件处理后造粒成型加工成轻质多孔Si-Al-Ca-C结构的吸附材料。研究了该吸附材料对工业废水中多种金属离子的吸附性能,探讨了影响吸附性能的因素。研究结果表明,在一定条件下,Si-Al-Ca-C吸附材料对工业废水中Al3+、Ca2+、Mn2+、Cu2+、Fe3+、Mg2+、As3+和Zn2+的净化率分别高达99.34%、99.82%、98.26%、98.16%、97.76%、97.01%、100%和89.09%。金属离子残留浓度分别为0.152、0.07、0.012、0.02、0.119、0.311、0和0.259 mg/L,均低于国家污水综合排放标准(GB8978-1996)一级标准。     

Photodegradation mechanism of two dyes: the influence of adsorption behavior on the novel TiO2 particles

The relationship between adsorption behavior and photocatalytic mechanism of the two dyes was investigated. Adsorption isotherms showed that the adsorption of cationic pink FG was Langmuir type behavior, while the reactive brilliant red k-2G was Freundlich type behavior. The increasing pH favored the adsorption of FG but have little effect on the photodegradation. The increasing pH favored the adsorption and the photodegradation of k-2G. The presence of scavenger of hvb^ and OH. radical potassium iodide inhibited the degradation of k-2G, free radicals scavenger tetranitromethane inhibited the photodegradation of FG. These results indicated that the photodegradation of FG mainly via free radicals in solution, and the photodegradation of k-2G was mainly on the catalysts surface or near the interface of solid and solution by react with hvb^ and surface-bound OH.. The different effect of SO4^2- , HCO3^- on the adsorption and photodegradation of two dyes confirmed these results.     

后石油时代沙生灌木直燃发电对环境的影响＊

文章通过对内蒙古中西部地区沙生灌木的成分分析,基于生命周期法(LCA),定量论证了沙生灌木直燃发电开发模式对环境的影响和推广的可行性,指出相比石油等传统能源,这种模式具有较大的潜在效益,对于我国发展绿色替代能源,促进西部地区生态环境和经济协调发展具有一定的战略意义。     

生理毒代动力学模型及其在有机污染物水生生态毒理研究中的应用

人类生产和生活使用各种人工合成的化学品,种类和数量急剧增长,对生态系统和人体健康造成了极大威胁。因此,亟需采用高效的方法对数量巨大的化合物进行毒性评价。对生理毒代动力学(PBTK)模型的建立过程及其在污染物生态毒理研究中的应用进行了综述。PBTK模型,又称生理药代动力学(PBPK)模型,是利用生理学和解剖学等原理,将生物体简化为用血流连接的肝、肾和脂肪等各组织器官房室,模拟化合物在生物体内的吸收、分布、代谢和排泄过程。模型参数包括生理参数和生化参数2个部分,可用MATLAB等软件进行模拟。模型已应用于数百余种有机污染物在鱼体等水生生物体的毒代动力学模拟。已有模拟结果能够预测化合物在生物体内的有效剂量,对化合物毒性进行评估,并可用于不同物种、不同剂量和不同暴露途径间的外推,有力推进了污染物生态毒理研究工作的开展。     

热带海洋环境中5083铝合金腐蚀行为研究

目的 研究某岛礁不同海洋区带环境中5083铝合金的腐蚀规律。方法 在某岛礁进行海洋多区带腐蚀试验,利用表面微观形貌观测、腐蚀产物分析、质量损失测试及点蚀深度测量等手段,对比分析铝合金在不同海洋区带中的腐蚀形貌、腐蚀速率和点蚀深度。结果 5083铝合金在某岛礁海洋全浸区带环境中的腐蚀速率最大,大气区带中的腐蚀速率最小,在潮差区带的腐蚀速率介于二者之间。试样在海洋不同区带主要发生局部腐蚀,大气区试样的最大点蚀深度最大,而潮差区试样的最大点蚀深度最小。在不同海洋区带,铝合金腐蚀产物和附着物的混合物中均含有钙元素,大气区钙元素含量远低于潮差区和全浸区,潮差区和全浸区铝合金表面的腐蚀产物和附着物混合物中主要含有CaCO₃、CaSiO₃和Al₂O₃。结论 不同海洋区带环境中,5083铝合金的腐蚀速率差别较大,潮差区和全浸区材料表面附着大量污损生物和矿物质。     

膜电解法退镀废ABS电镀件及回收铜和镍

采用膜电解法对废丙烯腈-丁二烯-苯乙烯（ABS）电镀件进行退镀处理。以退镀废液作为阴极液和阳极液,在阳极室退镀ABS电镀件,在阴极室电解退镀废液,进行铜镍分离,回收铜粉和NiCl₂。实验结果表明：在阴极电流密度为500 A/m²、初始铜离子质量浓度为24.00 g/L的条件下电解160 min,阴极铜回收率可达97.65%,电流效率达86.60%,得到的铜粉纯度为97%~99%,处理1 L退镀废液可回收铜粉20.0 g,2 mol/L盐酸0.87 L,NiCl₂晶体43.8 g;在阳极电流密度为500 A/m²、液固比为6的条件下电解60 min, ABS电镀件的退镀率为77.22%。     

移动基站远场区功率密度分布和规划控制距离

为掌握畸变条件下移动通讯基站周围功率密度分布,合理确定其规划控制距离,在杭州市主城区选取具有不同网络类型和载波数的2057个移动基站,实测话务高峰期基站周围射频场功率密度.结果表明,畸变条件下GSM基站远场区功率密度S∝r-1.83 (非畸变条件下S∝r-2),决定系数R2=0.80;距基站天线20m内,约85.91%测点功率密度实测值小于非畸变条件下依据天线标称功率和增益计算的理论值.,频数统计结果表明,距天线1~15m范围内,运营商A所属基站S10值(表示有10%的测点功率密度高于该值)比运营商B高10.00%;距天线1~30m内,双网和三网共站基站S10值分别比单网基站高50.31%和57.10%.移动通讯基站规划控制距离以15m为宜,15m外测点功率密度值超过8μW/cm2的基站只占所测基站的0.11%.     

测试管法现场测定水中硫化物

研制了1种简便、快速，适用于现场监测水中硫化物的测试管。在酸性和有Fe^3 条件下，硫化物与对氨基二甲基苯胺反应生成亚甲蓝，颜色的深浅与硫化物含量成正比，通过与标准色阶对照得出水样中硫化物的含量。进行了测试管稳定性和标准色标稳定性试验，结果表明，在常温下测试管有效期为2a，标准色阶可使用5a。作了测试管法与分光光度法的对比测定，表明两种方法测定结果基本相同，相对误差在10％以内，满足了现场监测需要。     

Low-carbon transition of iron and steel industry in China: Carbon intensity, economic growth and policy intervention

As the biggest iron and steel producer in the world and one of the highest CO₂ emission sectors, China's iron and steel industry is undergoing a low-carbon transition accompanied by remarkable technological progress and investment adjustment, in response to the macroeconomic climate and policy intervention. Many drivers of the CO₂ emissions of the iron and steel industry have been explored, but the relationships between CO₂ abatement, investment and technological expenditure, and their connections with the economic growth and governmental policies in China, have not been conjointly and empirically examined. We proposed a concise conceptual model and an econometric model to investigate this crucial question. The results of regression, Granger causality test and impulse response analysis indicated that technological expenditure can significantly reduce CO₂ emissions, and that investment expansion showed a negative impact on CO₂ emission reduction. It was also argued with empirical evidence that a good economic situation favored CO₂ abatement in China's iron and steel industry, while achieving CO₂ emission reduction in this industrial sector did not necessarily threaten economic growth. This shed light on the dispute over balancing emission cutting and economic growth. Regarding the policy aspects, the year 2000 was found to be an important turning point for policy evolution and the development of the iron and steel industry in China. The subsequent command and control policies had a significant, positive effect on CO₂ abatement.