水上溢油环境风险源确定研究

依据泄漏进水域的最大油品量、水域环境敏感性等两个主要因素,研究确定了江苏油田水上(临水)设施环境风险源等级,并针对不同的风险源阐述了降低风险等级的技术方法和预防措施,为加强江苏油田环境风险防患、提高应急处理能力提供了依据。     

地质灾害专题地图编制研究

地质灾害专题制图是地质灾害系统研究成果的高层次综合。本文论述了地质灾害制图的目的、原则、特点、表示内容与方法,为规划决策提供地质灾害背景图件。     

阿特拉津在土壤中的生物降解研究

运用恒温培养法研究了阿特拉津在河北省白洋淀地区农田土壤中的生物降解动力学,并从中分离鉴定了土壤中降解阿特拉津的优势菌种,研究结果表明,该土壤对阿特拉津具有一定的降解能力,非生物＋生物的降解、非生物降解和生物降解的速率分别为０．０２６２ｄ＾－１,０．００５５４８ｄ＾－１和０．００８１９４ｄ＾－１,半衰期分别为２６ｄ,１２５ｄ和８５ｄ,发现土壤中降解阿特拉津的优势菌种为蜡状芽孢杆菌（Ｂａｃｉｌｌｕｓ     

Effect of straw retention on carbon footprint under different cropping sequences in Northeast China

Environmental Science and Pollution Research - Inappropriate farm management practices can lead to increased agricultural inputs and changes in atmospheric greenhouse gas (GHG) emissions, impacting...     

Removal of methylene blue by coupling black carbon adsorption with TiO2 photodegradation

In this study, the removal of methylene blue (MB) by the coupling of black carbon (BC) and TiO₂ was investigated. The effects of different parameters such as catalyst dose, sorbent, initial concentrations of dye, pH of the solutions, recycles on discoloration, and chemical oxidation demand (COD) reduction of MB were monitored to optimize the reaction conditions. The discoloration and COD conversation rate of MB obtained by the coupling process were 100% after 90?min irradiation. The synergistic effect of MB-adsorption on BC followed by degradation through TiO₂ photocatalysis was proved by FT–IR spectrophotometer. The BC as by-product of natural materials is a promising adsorbent for waste water treatment.     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

Distribution and vertical migration of polycyclic aromatic hydrocarbons in forest soil pits of southeastern Tibet

PAHs could be transported to Tibetan Plateau in accompany with atmospheric circulation. The forest regions were found be an important sink for PAHs, while their distributions and migrations in forest are still uncertain. In this study, soil profile samples were collected in southeastern Tibet and the concentrations, distributions, and migration of PAHs in forest region were investigated. The PAHs levels in the forest soils were at the low end of remote sites, ranged from 27.4 to 120.3 ng g^?1 on a dry weight based. Due to low ambient temperature and high organic carbon content, enrichment of PAHs was found in higher altitude on north side. According to the soil profiles, the vertical distributions of PAHs in organic layers were mainly influenced by pedogenesis, while the vertical distributions in mineral layers were dominated by downward leaching effect. Enrich factor (EF) of PAHs was estimated, and the values in organic layers were positively correlated with the octanol–air partition coefficients (K _OA), but EFs in mineral layers decreased with the K _OA values. PAHs in the surface soils on the north side of forest were relatively stable, while the migration of PAHs on the south sides and other clearing sites was more active. The leaching rates of PAHs in clearing site ranged between 1.42 and 29.3%. The results from this study are valuable on the characterization of PAHs in Tibetan Plateau.     

应用活性炭再生含多环芳烃植物油的可行性及性能评价

为利用植物油去除污染土壤中的多环芳烃,研究了应用活性炭F400吸附柱再生含多环芳烃植物油的可行性,对含高浓度多环芳烃的植物油进行二级再生处理,优化了过程参数,比较了原植物油和经活性炭再生的植物油去除土壤中多环芳烃能力的差别.结果表明,活性炭吸附法可以实现含多环芳烃植物油的再生,证明了修复策略的可行性.二级处理可以进一步吸附植物油中的多环芳烃,且高分子量多环芳烃几乎完全被去除.再生植物油和原植物油去除土壤中多环芳烃的能力没有明显差别.     

镉胁迫对苎麻(Boehmeria nivea)根系及叶片抗氧化系统的影响

镉(Cd)是非必需和毒性最强的重金属元素之一,不合理的开发利用可导致土壤受到Cd的严重污染,严重危及土壤环境或水环境。以苎麻为材料,采用模拟镉(Cd)污染盆栽培养法,选择21 d和49 d等2个不同胁迫期,测定不同浓度Cd2+胁迫下苎麻根系与叶片中渗透调节物质含量、超氧化物岐化酶(SOD)活性、过氧化物酶(POD)活性、过氧化氢酶(CAT)活性、丙二醛(MDA)含量及根系活力的变化。结果表明,高浓度胁迫49 d后,苎麻根系中的渗透调节物质含量明显高于叶片含量,且极显著高于对照,并在240 mg·L~(-1)Cd处理下出现最高值;胁迫49 d时,根系与叶片的渗透调节物质含量与Cd2+浓度极显著正相关。在2个不同胁迫周期,苎麻根系的SOD与POD活性均明显高于叶片;在胁迫21 d时,根系的CAT活性低于叶片,而胁迫49 d后,则明显高于叶片;胁迫21 d时,苎麻根系与叶片的抗氧化酶活性均较胁迫49 d要高;胁迫49 d时,根系POD活性与Cd2+浓度呈极显著正相关,表明根系POD酶在抗氧化酶中占主导地位。不同胁迫时长下苎麻根系或叶片的MDA含量变化趋势不明显,但根系或叶片受胁迫21 d后的MDA含量随Cd2+浓度增加的波动相对受胁迫49 d后的更明显,表明植物早期生理功能出现暂时性的修复。2个不同胁迫周期内,不同浓度镉胁迫下苎麻的根系活力均比对照组下降。研究显示,苎麻根系与叶片对镉胁迫的应答机制不同,且在不同胁迫时间下的响应机理差异较大,根系表现出更强的耐受能力。     

纹缟虾虎鱼对Cu~(2+)、Cd~(2+)和氨氮的毒性响应和敏感性分析

以纹缟虾虎鱼为受试生物,分别进行了Cu~(2+)、Cd~(2+)和氨氮为环境因子的急性毒性实验和氨氮慢性暴露实验,结合文献数据分析纹缟虾虎鱼对3种污染物的敏感性。结果表明,Cu~(2+)、Cd~(2+)和氨氮对纹缟虾虎鱼的EC50分别为4.527、40.408和63.182mg·L~(-1)。组织切片结果显示,氨氮暴露能够引起纹缟虾虎鱼肝组织结构退化,组织细胞畸变,其损伤程度随着氨氮浓度的升高而加剧。氨氮暴露对肠管未见明显影响。敏感性分析结果表明,纹缟虾虎鱼对Cu~(2+)、Cd~(2+)和氨氮的累积概率分别为83.33%、96.27%和90.48%,均表现为不敏感。在Cu~(2+)、Cd~(2+)和氨氮对海洋生物的敏感性排名中,纹缟虾虎鱼分别在第31/35、32/32和19/20位。在8~12种海洋鱼类中,纹缟虾虎鱼对上述3种污染物的敏感性都处在较低水平。