Current and future solid waste management system in Northern Viet Nam with focus on Ha Noi: climate change effects and landfill management

The contribution investigates the solid waste management system in Ha Noi under consideration of the interrelation between climate change effects and landfill management by means of a cause-and-effect-analysis as well as water balances using the HELP 3.95 model and gas emission data, followed by a Strength, Weakness, Opportunities, Threats (SWOT) analysis. Even landfills are sources of methane (CH₄) emissions they are also impacted by climate change. The main effects on landfill sites are the change of climatic conditions, namely the regional water balance, extreme precipitation and storm events. The results of the water balance model results show that a geomembrane surface sealing can reduce the leachate formation significantly, a fact that is also valid for the climate change scenario with higher precipitation. The risk of flooding and erosion at the landfill sites increases, which will require a customized water management. In parallel landfill gas offers the opportunity for recovery of Greenhouse Gases (GHG) and the generation of renewable energy. Some further management options are wind turbines, photovoltaic systems or biomass for biogas conversion, which was grown on closed landfill sites. The inclusion of climate friendly management options of closed landfills in a “Good Landfill Aftercare Practice” is recommended.     

Numerical study of heat transfer characteristics of char from waste tire pyrolysis

To investigate heat transfer of char from waste tire pyrolysis, the cooling of char was simulated by the computational fluid dynamics. To scrutinize the heat transfer characteristics, bed height, temperature of cooling wall, and mixing time were selected as calculation parameters. From the results, increasing the char bed height from 0.005 to 0.02 m, the total heat transfer is decreased as from 45.5 to 26.5 J. As the char bed height is further increased from 0.02 to 0.06 m, the total heat transfer is decreased from 26.5 to 9.1 J. The char bed height affects the total heat transfer significantly. The total heat transfer decreases from 15.9 to 14.0 J as the temperature of cooling wall increases from 273.15 to 323.15 K. The total heat transfer mildly depends on the temperature of cooling wall. The particle mixing time increases from 10 to 120 s and the total heat transfer decreases from 28.6 to 22.6 J. It is noted that the particle contact is enhanced between char particles as well as the particles and cooling wall as the particle mixing time decreases. Consequently, heat transfer is augmented.     

Zr掺杂TiO_2介孔材料光催化降解头孢氨苄

采用固相合成法制备了Zr掺杂TiO_2(Zr-TiO_2),运用XRD技术对其进行了表征,并将其用于水中头孢氨苄的光催化降解,通过单因素实验及正交实验优化了光催化反应条件。结果表明:制备的Zr-TiO_2为锐钛矿型介孔材料,孔径约为8.12 nm;各因素对头孢氨苄去除率的影响由大到小依次为光照时间、Zr-TiO_2投加量、初始头孢氨苄质量浓度;在Zr-TiO_2投加量为1.5 g/L、初始头孢氨苄质量浓度为10 mg/L、溶液pH为7.0、光照(300 W UV)时间为1.5 h的优化条件下,头孢氨苄去除率高达99.46%;Zr-TiO_2光催化剂的重复使用性能良好。     

Adapting a geographical information system-based water resource management to the needs of the Romanian water authorities

Background, aim, and scope

The need for global and integrated approaches to water resources management, both from the quantitative and the qualitative point of view, has long been recognized. Water quality management is a major issue for sustainable development and a mandatory task with respect to the implementation of the European Water Framework Directive as well as the Swiss legislation. However, data modelling to develop relational databases and subsequent geographic information system (GIS)-based water management instruments are a rather recent and not that widespread trend. The publication of overall guidelines for data modelling along with the EU Water Framework Directive is an important milestone in this area. Improving overall water quality requires better and more easily accessible data, but also the possibility to link data to simulation models. Models are to be used to derive indicators that will in turn support decision-making processes. For this whole chain to become effective at a river basin scale, all its components have to become part of the current daily practice of the local water administration. Any system, tool, or instrument that is not designed to meet, first of all, the fundamental needs of its primary end-users has almost no chance to be successful in the longer term.

Materials and methods

Although based on a pre-existing water resources management system developed in Switzerland, the methodological approach applied to develop a GIS-based water quality management system adapted to the Romanian context followed a set of well-defined steps: the first and very important step is the assessment of needs (on the basis of a careful analysis of the various activities and missions of the water administration and other relevant stakeholders in water management related issues). On that basis, a conceptual data model (CDM) can be developed, to be later on turned into a physical database. Finally, the specifically requested additional functionalities (i.e. functionalities not provided by classical commercial GIS software), also identified during the assessment of needs, are developed. This methodology was applied, on an experimental basin, in the Ialomita River basin.

Results

The results obtained from this action-research project consist of a set of tangible elements, among which (1) a conceptual data model adapted to the Romanian specificities regarding water resources management (needs, data availability, etc.), (2) a related spatial relational database (objects and attributes in tables, links, etc.), that can be used to store the data collected, among others, by the water administration, and later on exploited with geographical information systems, (3) a toolbar (in the ESRI environment) offering the requested data processing and visualizing functionalities. Lessons learned from this whole process can be considered as additional, although less tangible, results.

Discussion

The applied methodology is fairly classical and did not come up with revolutionary results. Actually, the interesting aspects of this work are, on the one hand, and obviously, the fact that it produced tools matching the needs of the local (if not national) water administration (i.e. with a good chance of being effectively used in the day-to-day practice), and, on the other hand, the adaptations and adjustments that were needed both at the staff level and in technical terms.

Conclusions

This research showed that a GIS-based water management system needs to be backed by some basic data management tools that form the necessary support upon which a GIS can be deployed. The main lesson gained is that technology transfer has to pay much attention to the differences in existing situations and backgrounds in general, and therefore must be able to show much flexibility. The fact that the original objectives could be adapted to meet the real needs of the local end-users is considered as a major aspect in achieving a successful adaptation and development of water resources management tools. Time needed to setup things in real life was probably the most underestimated aspect in this technology transfer process.

Recommendations and perspectives

The whole material produced (conceptual data model, database and GIS tools) was disseminated among all river basin authorities in Romania on the behalf of the national water administration (ANAR). The fact that further developments, for example, to address water quantity issues more precisely, as envisaged by ANAR, can be seen as an indication that this project succeeded in providing an appropriate input to improve water quality in Romania on the long term.

     

苏州市工业用地地表径流污染特性研究

对苏州新区枫桥工业园湘江路段的10场有效降雨事件的地表径流污染特性进行了研究.研究表明.地表径流水质参数COD、SS、NH3-N、TN、TP均服从对数正态分布,在95%置信水平下,SS与COD、TP、TN之问存在线性相关性(R=0.45～0.72).统计了污染物事件平均浓度(EMC),COD、SS、NH3-N、TN、TP的EMC中值分别为213、491、2.65、5.19、1.07 mg/L,相对应的单位面积污染物负荷分别为1 898、4 375、24、46、10 kg/(hm2·a).与韩国Chongju工业区和上海市相比,SS负荷高是苏州新区枫桥工业园地表径流水质的主要特点,削减SS负荷对控制其非点源污染具有重要意义.     

Fe^0-厌氧微生物体系处理活性艳红X-3B的试验研究

采用间歇式摇床试验,研究了葡萄糖共基质条件下Fe^0-厌氧微生物体系中Fe^0投加量、pH值、染料初始浓度对活性艳红X-3B模拟废水脱色率的影响,比较了Fe^0-厌氧微生物、纯厌氧微生物及纯Fe^0 3种体系中废水的脱色效果。结果表明：Fe^0-厌氧微生物体系中初始浓度（50～500mg／L）对活性艳红X-3B的脱色率影响不大;而Fe^0投加量、pH值存在一个最佳范围;当Fe^0投加量为260mg／L,pH值为6．0,污泥浓度为0．35gVSS／L,停留时间约为30h时,体系中活性艳红X-3B的脱色率可达90％左右,比相同试验条件下纯Fe^0、纯厌氧微生物体系达到此脱色率所需时间分别缩短了约1／2、7／10。在Fe^0-厌氧微生物体系中,由紫外可见分光光度分析可推测活性艳红X-3B的脱色机理主要是其偶氮键发生断裂,生成苯胺和萘类物质,而且苯胺和萘类物质能得到进一步降解。     

DGGE、T-RFLP 、LH-PCR对两种活性污泥的微生物种群多样性分析的比较

采用基于PCR扩增的分子生态技术DGGE、T-RFLP和LH-PCR,对2种典型污水处理系统中的活性污泥（生活污泥、焦化污泥）进行微生物种群多样性分析;并以此比较3种技术的优劣,提出不同应用条件下研究方法的选择依据。根据实验结果：DGGE得到的条带较多,但误差来源也最多;T-RFLP技术较为灵敏,但需要选择适当的内切酶,严格控制酶切条件,并且文库比对误差较大;而LH-PCR操作简单,结果稳定性较高。虽然目前尚无法判断3种方法的准确性,但LH-PCR在活性污泥的微生物种群多样性分析中已显示出潜在优势。     

On experimental setup in bioelectromagnetics

Bioeffects created by electromagnetic field (EMF) are the subject of intensive studies. This paper critically considers estimations of exposure to EMF in bioelectromagnetic experiments. Results of calculations presented herein show the significant role of the presence of conducting bodies (the exposure system) near an object under test on EMF energy absorption as well as mutual interactions between simultaneously exposed objects. Our aims herein are twofold: firstly to find a way to refer measurement results to free-space conditions in order to enable comparison of results obtained in different laboratories, and secondly to show that EMF energy absorption in any exposed object is different and that this difference is a function of the size of the exposure system, the number of exposed objects, and the particular properties (i.e., the electromagnetic structure) of the objects. In the authors’ opinion the existence of interactions caused by the presence of the exposure system and other exposed objects is a reason why remarkable differences are observed between experiments performed even under supposedly identical conditions. The presented considerations and conclusion suggest wider participation of physicists and engineers in bioelectromagnetic experiments in order to ensure the correctness of metrological aspects of these experiments.     

Choice of parameters for passive shielding of power-frequency magnetic fields

Epidemiological studies suggesting the possibility of harmful effects on human (specifically children’s leukaemia) due to long-term exposure to magnetic fields of extremely low frequency (e.g. 50/60 Hz) and relatively low values (i.e. over the microtesla range) have stirred high activity in the topic of magnetic field mitigation. To reduce these fields, it is common to use passive metal screens (e.g. plates made of aluminium or steel). To design them, effective and fast numerical computations are highly desirable. In this article, a method is presented, which computes various parameters of screens in a given shielding problem and yields magnetic field distribution and shielding factors. The method takes into consideration the 3D field distribution and is able to solve systems with large aspect ratios (thin thickness in comparison with its other dimensions); this is a common problem where other methods such as finite elements often experience difficulties. The presented method computes separately the field inside and outside the screens. Afterwards, the solutions are “stitched” together along the border of the subregions. Two practical examples are given of the developed numerical method.