Extraction,reclamation and after use at gravel quarries near Canterbury,Kent

A study of the extraction, reclamation and after use of flood plain gravel quarries between Bagham and Thannington, south west of Canterbury in Kent, South-east England, was made, based on a review of the literature and field work. The area represents a linear extension of the urban fringe of Canterbury. Gravel production has been the most significant industry in terms of environmental impact over the last thirty years, and the result of such activity has been the creation of an extensive area of lakes and wetland habitats. Present and future gravel production will more than double the existing lakes and wetlands areas. It is suggested that, in terms of land use, this man-made environment is best suited for water-based recreation and that three zones should be recognised for an amenity park, angling and wildlife respectively. Further mineral production between Ashford and Bagham may mean a reappraisal of the proposed water resource use, particularly for wildlife. As a result of this study, attention is drawn to the spatial relationships between recreational demand groups and flood plain location with respect to the urban centre and to each other.     

Precipitation of aragonite by calcitic bivalves in Mg-enriched marine waters

To understand the relative importance of biological versus physicochemical control over biomineralization, we have tested if the chemical composition of the medium (i.e., the Mg/Ca ratio) can change the mineralogy of mollusk shells. The shells of mollusks are made of calcite and/or aragonite, which are by far the most common CaCO₃ polymorphs. Several species of bivalves with predominantly calcitic shells have been cultivated in artificial seawater with a Mg/Ca molar ratio within the range of 8.3–9.2, well above the present value for seawater (5.2). Four out of six species used (the scallop Chlamys varia, the oyster Ostrea edulis, the saddle oyster Anomia ephippium and the mussel Mytilus edulis) survived long enough to secrete significant amounts of calcium carbonate. The deposits (sometimes extensive) formed on the interior shell surfaces were predominantly aragonitic. Three individuals of C. varia also increased their length by adding new shell at the margin. Contrary to the internal shell deposits, these margins were high-Mg calcite. This implies that the marginal mantle is able to exert a more strict control on the secreted mineral phase than the mantle facing the internal shell surface. This is the first report on an in vivo experimentally forced switch in bivalve shell mineralogy, from calcite to aragonite due to a change in water chemistry.     

PREP-PAC: a nutrient replenishment product designed for smallholders in western Kenya

Continuous cropping in the absence of external nutrient inputs to soils has led to the expression of poorly productive patches in farmers’ fields of western Kenya. Farmers attempting to correct these conditions are often confused by the spatial and symptomatic irregularity of affected plants and, until recently, no soil management product was commercially available that is specifically formulated to restore soil fertility to these patches. PREP-PAC consists of 2.0 kg of Minjingu rock phosphate (RP), 200 g of urea, seeds of various symbiotic nitrogen-fixing food legumes, rhizobial inoculant, gum arabic seed adhesive, lime for seed pelleting, and instructions for the use of these materials. It is intended for addition to 25 m² and produced at a cost of $ 0.56 per unit. The general principle is to apply slowly available RP sufficient for several cropping seasons with readily available nitrogenous fertilizer and to intercrop farmer’s maize (Zea mays) with a legume that provides residual fixed-nitrogen and organic inputs to the soil. This approach was tested in on-farm experiments conducted in collaboration with several grassroots rural development organizations. An experiment examined interactions between PREP-PAC components in a maize–soybean (Glycine max) intercrop in nutrient-depleted soils with sandy and clayey surface horizons. The treatments included ±RP, ±urea, and ±inoculants arranged as a 2³ factorial with four replicates at each location. Total value of the intercrops ranged between $ 0.83 in the unamended plots and $ 2.44 in plots treated with PREP-PAC. Significant positive effects were observed with the addition of RP (P<0.001), urea (P=0.04), and inoculant (P=0.01) and in interactions between RP and urea (P=0.02) or inoculant (P=0.07). The return ratio to PREP-PAC investment was 2.6 in the sandy soil and 3.7 in the clay. PREP-PACs were tested on-farm in 52 symptomatic patches containing maize–bean intercrops with and without an improved variety of climbing Phaseolus vulgaris cv. Flora. Unamended patches (25 m²=0.0025 ha) produced 1.6 kg maize and 0.08 kg bean. With addition of PREP-PAC containing Flora, yields increased to 4.1 kg maize and 1.1 kg bean (P<0.001 for both crops). Improvement in bean yield during the first cropping season nearly offset PREP-PAC’s investment costs. PREP-PAC is a strategic approach because all of its ingredients, except for urea, originate from East Africa, and are relatively inexpensive; the product is intended for distribution through existing retail and development networks.     

活性炭纤维（ACF）电极法处理染料废水的探讨

根据Ａｄｖａｎｃｅｄ Ｃｈｅｍｉｃａｌ Ｏｘｉｄａｔｉｏｎ＾［１］［６］的原理，通过ＡＣＦ电极的引入，使得电化学处理成为一个自由基反应与絮凝反应相结合的过程，对于多种模拟印染废水可以具有良好的处理效果。通过与其他方法的对比实验，表明在色度去除率方面不比Ｆｅｎｔｏｎ试剂法逊色，并明显优于絮凝法。经过单级处理，对于实验范围内的还原染料、酸性染料、活性染料及硫化染料，其脱色率全部大于９０％，大多数为９８     

Sustainable Remediation Considerations for Treatment of 1,4‐Dioxane in Groundwater

1,4‐Dioxane remediation is challenging due to its physiochemical properties and low target treatment levels. As such, applications of traditional remediation technologies have proven ineffective. There are a number of promising remediation technologies that could potentially be scaled for successful application to groundwater restoration. Sustainable remediation is an important consideration in the evaluation of remediation technologies. It is critically important to consider sustainability when new technologies are being applied or new contaminants are being treated with traditional technologies. There are a number of social, economic, and environmental drivers that should be considered when implementing 1,4‐dioxane treatment technologies. This includes evaluating sustainability externalities by considering the cradle‐to‐grave impacts of the chemicals, energy, processes, transportation, and materials used in groundwater treatment. It is not possible to rate technologies as more or less sustainable because each application is context specific. However, by including sustainability thinking into technology evaluations and implementation plans, decisions makers can be more informed and the results of remediation are likely to be more effective and beneficial. There are a number sustainable remediation frameworks, guidance documents, footprint assessment tools, life cycle assessment tools, and best management practices that can be utilized for these purposes. This paper includes an overview describing the importance of sustainability in technology selection, identifies sustainability impacts related to technologies that can be used to treat 1,4‐dioxane, provides an approximating approach to assess sustainability impacts, and summarizes potential sustainability impacts related to promising treatment technologies. ©2016 Wiley Periodicals, Inc.     

Remedial Process Optimization and Ozone Sparging for Petroleum Hydrocarbon‐Impacted Groundwater

A former natural gas processing station is impacted with total petroleum hydrocarbons (TPH) and benzene. Remedial process optimization (RPO) was conducted to evaluate the effectiveness of the historical air sparging/soil vapor extraction (AS/SVE) system and the current groundwater extraction and treatment system. The RPO indicated that both remedial activities offered no further benefit in meeting remediation goals. Instead, an in situ chemical oxidation (ISCO) system was recommended. Ozone was selected, and the results of a bench test indicated that the ozone demand was 8 to 12 mg ozone/mg TPH and that secondary by‐products would include hexavalent chromium and bromate. A capture zone analysis was conducted through groundwater flow modeling (MODFLOW) to ensure containment of the injected oxidant using the existing groundwater extraction system. Results of a pilot study indicated that the optimum frequency of ozone sparging is 60 minutes in order to reach a maximum radius of influence of 20 feet. TPH concentrations within the treatment zone decreased by 97 percent over two months of ozone sparging. Concentrations of hexavalent chromium and bromate increased from nondetect to 44 and 110 mg/L, respectively, during the ozone sparging but attenuated to nondetectable concentrations within three months of system shut down. ©2016 Wiley Periodicals, Inc.     

Implementing pro-poor policies in a decentralized context: the case of the Rural Water Supply and Sanitation Program in Tanzania

This paper examines the challenge of achieving a balance between the implementation of centrally designed pro-poor policies and the decentralization of responsibilities to local governments in many African countries. It analyzes the implementation of the Rural Water Supply and Sanitation Program in Tanzania. Key mechanisms for planning and allocating resources are analyzed at ministry, district, and village levels. Results show that a mixture of policy incoherencies, technical shortcomings and political influence determine that only a small proportion of funds reaches the underserved areas. We argue that a greater connection between the bottom-up and top-down planning mechanisms, and a sharp increase of downwards accountability are needed before decentralized decision-making result in better resources allocation. Meanwhile a bigger intervention from central government is needed.