碱激发胶凝材料及其固化Pb^2＋的试验研究

对碱激胶凝材料（碱-偏高岭土、碱-矿渣和碱-粉煤灰）与水-水泥体系固化Ph^2＋进行了试验研究,其中水-水泥体系为对比样。结果表明：对于相同稠度的碱激发胶凝材料,即使Pb^2＋含量达到2．4％,除了碱-粉煤灰的抗压强度略低外,其他都达到30MPa以上,满足填埋或做建筑基材的使用要求;与水泥相比,碱激发胶凝材料能显著降低重金属离子（Ph^2＋）浸出浓度,其规律性与其NH4交换容量大小的规律性一致,与其固化体的抗压强度的大小没有相关性。     

Carbon isotope analysis for source identification of atmospheric formaldehyde and acetaldehyde in Dinghushan Biosphere Reserve in South China

Formaldehyde and acetaldehyde are two most abundant carbonyls in ambient air. Biogenic emission has been proposed as a significant source other than anthropogenic emissions and atmospheric secondary formation. Here at a forest site in South China, the carbon isotopic compositions of formaldehyde and acetaldehyde emitted from leaves of three tree species (Litsea rotundifolia, Canarium album and Castanea henryi) were measured in comparison with the bulk carbon isotopic compositions of tree leaves. δ¹³C data of the emitted aldehydes (from ?31‰ to ?46‰) were quite different for tree species, which were all more depleted in ¹³C than the tree-leaf bulk δ¹³C values (from ?27‰ to ?32‰). Formaldehyde in ambient air at the forest site had δ¹³C values different from those of leaf-emitted formaldehyde, indicating other sources for ambient formaldehyde apart from direct emission from leaves, most probably the photooxidation of biogenic hydrocarbon like isoprene and monoterpene. The δ¹³C differences of acetaldehyde between ambient data and those of tree leaves emission were less than 1‰, implying direct biogenic emission as the dominant source.     

Endosulfan in China 1—gridded usage inventories

Background, aim, and scope  Endosulfan, an organochlorine pesticide (OCP), is genotoxic in mammalian cells and generally considered to be toxic and classified by the World Health Organization and the US Environmental Protection Agency as priority pollutants and a nominator for inclusion in a future iteration of the persistent organic pollutants treaty. Endosulfan is a currently used pesticide and still being used worldwide. The general trend of total global endosulfan use has increased continuously since the first year when this pesticide was applied. It is critical to create national endosulfan usage/emission inventories for China to carry out source–receptor relation analysis, risk assessment, and other research related to endosulfan in this country. Chinese inventories have been published for some OCPs, such as technical HCH and lindane, DDT, and chlordane; for endosulfan, however, there has not been any usage inventory available on any scales (national or provincial), although endosulfan has been widely used since 1994 in this country. This is the first part of the work. The goal of this paper is to quantify the historical production and usage of endosulfan in China and to compile gridded historical usage inventories of endosulfan for this country. Based on these usage inventories, emission and residue inventories will be created, which is the goal of the second part of the work. Materials and methods  Due to the lack of national production and usage information of endosulfan in China, a method to estimate the use of endosulfan was developed. First, information of crops on which endosulfan is applied and average endosulfan use and annual application frequencies of endosulfan on these crops were collected. Secondly, usage of endosulfan on each crop was estimated using the national cropland area for each province from Chinese government reports. Finally, with the help of GIS (geographic information system), the usage data of this insecticide was allocated to a grid system, with a 1/4° longitude by 1/6° latitude resolution, with a size for each grid cell of approximately 25 km by 25 km. Results and discussion  The use of endosulfan in agriculture in China started on cotton in 1994, and on wheat, tea, tobacco, apples, and other fruits in 1998. Endosulfan usage on cotton, wheat, tea, tobacco, and apples in China has been estimated to be approximately 25,700 t between 1994 and 2004. The province with the highest usage of endosulfan is Henan Province, with a total usage reaching 4,000 t, followed by the uses in Xinjiang Autonomous Region (3,200 t), Shandong Province (3,000 t), Hebei Province (2,100 t), and Anhui Province (1,900 t). Gridded usage inventories of endosulfan at a 1/4° longitude by 1/6° latitude resolution have been created, which indicate that the intensive endosulfan use was in the south of Hebei Province, west of Shandong Province, east of Henan Province, north of Anhui Province, east of Jiangsu Province, and some areas in Yunnan Province and Xinjiang Autonomous Region. General agreement has been found between the usage data from our estimation and the small amount of usage data published in China. Conclusions  This is the first national gridded endosulfan usage inventory produced for China. The annual applications of endosulfan from 1994 to 2004 in China were estimated based on the total areas of major crops, on which endosulfan was applied, and spatial distribution of the application was generated at provincial and prefecture levels. With the help of GIS, endosulfan usage based on prefecture was transferred to a 1/4° longitude by 1/6° latitude gridding system. The satisfaction of the inventories was supported by the consistence between the estimation of the annual usage and the reported annual production of endosulfan. Recommendations and perspectives  This gridded endosulfan usage inventory created in this study will be improved upon availability of new information of endosulfan. The usage inventories can be used to create gridded emission and residue inventories for this insecticide. It is believed that this work will pave the way for further endosulfan studies in China and beyond.     

利用中巴地球资源卫星数据反演武汉市湖泊营养状态指数

以武汉市主要湖泊为例,研究了利用中巴地球资源卫星（CBERS2）数据反演水体营养状态指数（TLI）。研究旨在评估利用中巴地球资源卫星数据来估算内陆水体富营养化程度的可能性。首先利用地面水质监测数据计算武汉市某些湖泊监测点的“真实的”营养状态指数（包括综合营养状态指数和修正的Carlson营养状态指数）,同时,在事先经过辐射校正和几何校正的CBERS2图像上,以9×9像元为采样窗口,提取各个对应地点的灰度值均值（从波段1至波段4）;然后,采用多元逐步回归分析,以各波段灰度值均值为自变量,建立营养状态指数经验遥感反演模型;最后,利用模型对整个湖泊水体的营养化状态指数进行反演,并绘制了其空间分布图。 结果显示,营养状态指数的自然对数值与CBERS2图像各波段灰度值之间存在较好相关关系,回归系数平方值(R²)为0.51。利用反演模型反演得到的湖区水质分布与实际情况基本相符。由于CBERS2图像数据可以从我国许多数据分发中心免费获取,这为低成本的水质遥感监测提供了一条途径。     

Incorporating layer- and local-scale heterogeneities in numerical simulation of unsaturated flow and tracer transport

This study characterizes layer- and local-scale heterogeneities in hydraulic parameters (i.e., matrix permeability and porosity) and investigates the relative effect of layer- and local-scale heterogeneities on the uncertainty assessment of unsaturated flow and tracer transport in the unsaturated zone of Yucca Mountain, USA. The layer-scale heterogeneity is specific to hydrogeologic layers with layerwise properties, while the local-scale heterogeneity refers to the spatial variation of hydraulic properties within a layer. A Monte Carlo method is used to estimate mean, variance, and 5th, and 95th percentiles for the quantities of interest (e.g., matrix saturation and normalized cumulative mass arrival). Model simulations of unsaturated flow are evaluated by comparing the simulated and observed matrix saturations. Local-scale heterogeneity is examined by comparing the results of this study with those of the previous study that only considers layer-scale heterogeneity. We find that local-scale heterogeneity significantly increases predictive uncertainty in the percolation fluxes and tracer plumes, whereas the mean predictions are only slightly affected by the local-scale heterogeneity. The mean travel time of the conservative and reactive tracers to the water table in the early stage increases significantly due to the local-scale heterogeneity, while the influence of local-scale heterogeneity on travel time gradually decreases over time. Layer-scale heterogeneity is more important than local-scale heterogeneity for simulating overall tracer travel time, suggesting that it would be more cost-effective to reduce the layer-scale parameter uncertainty in order to reduce predictive uncertainty in tracer transport.     

新型TCAS吸附树脂对水中Cd2+的吸附去除研究

通过静态吸附试验,研究一种由超分子受体化合物磺化硫杂杯芳烃（TCAS）与树脂结合的产物——新型TCAS吸附树脂对重金属Cd²⁺的吸附去除性能,并初步探讨了吸附机理。试验研究结果表明,TCAS吸附树脂对Cd²⁺的饱和吸附量为14.45 mg/g。当温度为20℃,0.5 g TCAS吸附树脂对10 mL浓度为5 mg/L的Cd²⁺溶液吸附60 min时, Cd²⁺的去除率可达到99%以上。pH值是影响TCAS吸附树脂吸附效果的重要因素,在pH=5～9时,Cd²⁺的去除率随着pH值的升高而增大。在试验范围内,TCAS吸附树脂对Cd²⁺吸附符合Freundlich方程。吸附在TCAS吸附树脂上的Cd²⁺可洗脱回收,TCAS吸附树脂也可再生利用。 TCAS吸附树脂对重金属Cd²⁺的吸附机理主要归因于TCAS对Cd²⁺的络合作用。     

铁改性海泡石除锑的影响因素研究

选择廉价海泡石, 用氯化铁对其改性。研究铁改性海泡石对锑的吸附特性。结果表明,氯化铁浓度、吸附时间、初始锑浓度以及温度等因素对锑的吸附影响较大,溶液初始pH影响不明显。在初始锑浓度50 mg/L,pH 6.8,5%氯化铁改性海泡石投加量为2 g/L,吸附90 min, 温度35℃下,吸附量可达21.6 mg/g。海泡石对吸附锑具有缓冲特性,溶液的初始pH值在3.1～10.1范围时,吸附后溶液的最终pH值为8～8.5。IMS吸附锑是放热过程。改性后海泡石比表面积增大,表面羟基数量增加,导致其吸附能力增强。通过XRD谱图并未发现铁晶体的存在。     

微生物絮凝剂改善城市污水厂浓缩污泥脱水性能的研究

采用酱油曲霉(Aspergillus sojae)产生的微生物絮凝剂(MBF)作为污泥絮凝脱水剂,对城市污水处理厂浓缩污泥进行调理,确定该絮凝剂对浓缩污泥脱水的处理工艺参数为：微生物絮凝液最佳投加体积为6%～8%（体积比）,发挥絮凝作用的最适污泥温度为28～32℃,最适pH为6～7。经微生物絮凝剂调理的污泥在3 000 r/min离心9 min,污泥脱水率高达82.7%,滤饼含水率降低至77.3%,污泥脱水后体积减至原来的1/5左右。     

脉冲电晕反应器结构对乙硫醇消除效果的影响

研究了脉冲电晕等离子体反应器结构的变化对乙硫醇消除效果的影响规律。结果表明,在反应器内设置折流板,可以增加气流的湍动程度,有利于活性粒子与污染物的充分接触,从而提高消除率。高压电极间距对电晕区范围及消毒效果有较大影响,间距较小将导致各电极产生的电场相互干扰明显,消除率减小;而电极间距过大,虽然电极间电场分布相互干扰小,但是反应器内可排布的电极数减少,总电晕区减少,消除率也减小。根据实验结果,电极间距设置为50 mm比较合理。另外,在相同的电场强度和脉冲频率下,毛刺形高压电极比线电极结构能耗低,能量利用率高。     

三氯生在碳纳米管上的吸附

药品和个人护理用品(PPCPs)已成为一个引起广泛关注的新的环境问题。采用碳纳米管（CNTs）对水溶液中的三氯生进行吸附处理,考察了碳纳米管粒径及用量、温度、pH、振荡时间等因素对三氯生去除率的影响。研究结果表明,碳纳米管能快速吸附水中的三氯生,粒径较小的碳纳米管可获得较高的三氯生去除率;低温有利于吸附反应的进行;pH在6.5～7.0时,三氯生的去除率可达97%。三氯生在碳纳米管上的吸附可以很好地用Langmuir和Freundlich吸附等温方程进行描述。