贵州镇远提钒尾渣固体废弃物二次资源利用研究

为了开发无尾矿、少尾矿提钒工艺,对贵州镇远江古钒矿实验室扩大试验流程产生的尾矿进行资源化利用研究,尾渣物质组成研究表明:提钒尾渣的主要化学成分为二氧化硅,主要矿物为石英,尾渣放射性检测结果高于建筑物主体墙材中放射性指标的要求,不能直接应用于建筑主体材料.经用尾渣烧成水泥试验结果表明:尾渣烧成的水泥熟料基本化学成分、物理性能测试结果符合GB/T 21372-2008硅酸盐水泥熟料要求.     

小煤柱巷道围岩变形的力学机理及演化过程研究

为研究小煤柱巷道围岩变形力学机理与演化过程,以石槽村矿某回风巷为研究对象,采用理论分析、FLAC3D数值模拟以及现场实测等方法,分析小煤柱条件下巷道围岩变形的主要影响因素以及表征特点。研究结果表明:侧压系数为巷道围岩变形的主控因素;侧压系数与巷道顶底板位移量呈正比关系,与两帮位移量呈反比关系;回风巷每次受采动影响时,变形可分为巷道稳定阶段、位移分化阶段以及位移加速变化阶段;围岩变形主要发生在一次采动影响时,此时巷道变形呈现明显的不对称,左右两帮的位移量差异明显,巷道的中心位置明显偏移。研究结果可为小煤柱巷道围岩支护提供技术参考。     

To roll or not to roll: nyctinastic behavior in young leaves of sacred lotus,Nelumbo nucifera

The Science of Nature -     

富油煤热解产物在粉砂介质中的吸附行为研究

富油煤原位热解产生的油、气等有机物会通过岩层的压裂缝进入含水层,产生一系列环境行为效应.为探究富油煤热解产物对地下水的影响,以陕北榆神府矿区富油煤与含水介质粉砂为研究对象,采用批量平衡试验,开展了粉砂对煤焦油不同组分的吸附动力学与吸附热力学研究.结果表明：粉砂对煤焦油中酚油、萘油、洗油、蒽油、沥青的动力学吸附均符合准二级动力学方程,等温吸附模型符合Freundlich方程,说明粉砂对5种组分的吸附为单分子层化学吸附;受富油煤热解焦油组分含量差异影响,粉砂对5种组分的吸附量表现为酚油<萘油<洗油<蒽油<沥青,其最大吸附量分别为0.4520、0.7926、1.9015、3.6336、11.8001 mg·g^-1,吸附量总和占煤焦油含量的68%~85%;随着温度的升高,粉砂对5种组分的吸附能力均有所减弱,表明升高温度不利于吸附行为的进行,且反应的ΔG⁰<0表明粉砂对5种组分的吸附过程主要以化学吸附为主且属于放热反应.     

鄱阳湖河湖交错区软体动物重金属富集与迁移特征分析

河湖交错区是鄱阳湖流域重金属污染物进入湖泊的主要通道,也是重金属富集的场所.本文通过在鄱阳湖河湖交错区采集软体动物样品,分析样品的肌肉和内脏中铁（Fe）、锰（Mn）、铜（Cu）、锌（Zn）、铬（Cr）、镍（Ni）、砷（As）、镉（Cd）、铅（Pb）和锑（Sb）的含量,利用生物-沉积物累积因子和碳氮稳定同位素对鄱阳湖软体动物重金属的富集特征及营养结构和食源关系进行研究,并利用综合目标危险系数进行健康风险评估.结果表明：①鄱阳湖软体动物重金属含量存在显著的种间和组织间的差异,且受体长体重的稀释作用,与所在栖息地的关系不大,但与区域背景环境存在明显的对应关系,均低于水产限量标准值.软体动物对重金属Cu、Zn和Cd具有明显的富集能力,蚌（圆顶珠蚌、三角帆蚌、背瘤丽蚌和褶纹冠蚌）易从环境中富集更多的Mn和Cd,而螺（铜锈环棱螺和大沼螺）则易富集Cu和Zn;②软体动物δ¹³C值为-29.84‰~-21.13‰,δ¹⁵N值为4.09‰~11.51‰,螺和蚌存在明显不同的食物来源.软体动物中的重金属并不随δ¹⁵N值的变化表现出显著的改变,但与δ¹³C值存在显著的线性关系;其中Cu和Zn与δ¹³C值表现为显著的正相关关系,而Mn、Cr、As、Cd、Pb和Sb表现为显著的负相关关系;③健康风险评估结果表明,不论是成人还是儿童,综合目标危险系数（TTHQ） 均大于1,表明鄱阳湖河湖交错区软体动物重金属的富集会对人群食用产生较为显著的健康风险,其中Mn和As是主要的贡献者,且食用蚌的风险略高于螺.研究结果可为鄱阳湖水生态安全、水生生物多样性保护及食品安全评估提供科学依据和理论支撑.     

Effects of artificially induced complete mixing on dissolved organic matter in a stratified source water reservoir

Naturally complete mixing promotes the spontaneous redistribution of dissolved oxygen(DO), representing an ideal state for maintaining good water quality, and conducive to the biomineralization of organic matter. Water lifting aerators(WLAs) can extend the periods of complete mixing and increase the initial mixing temperature. To evaluate the influence of artificial-induced continuously mixing on dissolved organic matter(DOM) removal performance, the variations of DOM concentrations, optical cha...     

Hydrothermal-treated Pt/Al2O3 as an excellent catalyst for toluene total oxidation

The preparation of highly active supported noble metal catalysts with a low noble metal loading has always been the ultimate goal of researchers working on catalysis. Hydrothermally treated Pt/Al₂O₃ (Pt/Al₂O₃-H) exhibits better catalytic activity than that (Pt/Al₂O₃-C) treated via the conventional calcination approach. At the high space velocity of 100,000 mL/(g∙hr), the temperature that correspond to 50% toluene conversion (T₅₀) of Pt/Al₂O₃-H is 115°C lower than that of Pt/Al₂O₃-C, and the turnover frequency (TOF) value can reach 0.0756 sec⁻¹. The mechanism by which the hydrothermal approach enhances Pt/Al₂O₃ activity has been investigated. The structure associated with the high catalytic activity of Pt nanoparticles (NPs) can be retained via hydrothermal treatment. Furthermore, the support is transformed to AlO(OH) with numerous surface hydroxyl groups, which in turn can facilitate the adsorption of toluene. And the synergistic effects of Pt NPs and AlO(OH) increases the contents of Pt in oxidation state and active oxygen, which are beneficial for toluene oxidation.     

Chemical characterization and source identification of PM2.5 in Luoyang after the clean air actions

Luoyang is a typical heavy industrial city in China, with a coal-dominated energy structure and serious air pollution. Following the implementation of the clean air actions, the physicochemical characteristics and sources of PM_2.5 have changed. A comprehensive study of PM_2.5 was conducted from October 16, 2019 to January 23, 2020 to evaluate the effectiveness of previous control measures and further to provide theory basis for more effective policies in the future. Results showed that the aerosol pollution in Luoyang in autumn and winter is still serious with the average concentration of 91.1 μg/m³, although a large reduction (46.9%) since 2014. With the contribution of nitrate increased from 12.5% to 25.1% and sulfate decreased from 16.7% to 11.2%, aerosol pollution has changed from sulfate-dominate to nitrate-dominate. High NO₃⁻/SO₄²⁻ ratio and the increasing of NO₃⁻/SO₄²⁻ ratio with the aggravation of pollution indicating vehicle exhaust playing an increasingly important role in PM_2.5 pollution in Luoyang, especially in the haze processes. Secondary inorganic ions contributed significantly to the enhancement of PM_2.5 during the pollution period. The high value of Cl⁻/Na⁺ and EC concentration indicate coal combustion in Luoyang is still serious. The top three contributor sources were secondary inorganic aerosols (33.3%), coal combustion (13.6%), and industrial emissions (13.4%). Close-range transport from the western and northeastern directions were more important factors in air pollution in Luoyang during the sampling period. It is necessary to strengthen the control of coal combustion and reduce vehicle emissions in future policies.     

Identification and characterization of Fe3O4/peroxodisulfate advanced oxidation products from sulfameter

Sulfonamides (SAs) are one of the most widely used antibiotics and their residuals in the environment could cause some negative environmental issues. Advanced oxidation such as Fenton-like reaction has been widely applied in the treatment of SAs polluted water. Degradation rates of 95%-99.7% were achieved in this work for the tested 8 SAs, including sulfisomidine, sulfameter (SME), phthalylsulfathiazole, sulfamethoxypyridazine, sulfamonomethoxine, sulfisoxazole, sulfachloropyridazine, and sulfadimethoxine, in the Fe₃O₄/peroxodisulfate (PDS) oxidation system after the optimization of PDS concentration and pH. Meanwhile, it was found that a lot of unknown oxidation products were formed, which brought up the uncertainty of health risks to the environment, and the identification of these unknown products was critical. Therefore, SME was selected as the model compound, from which the oxidation products were never elucidated, to identify these intermediates/products. With liquid chromatography-high resolution tandem mass spectrometry (LC-HRMS/MS), 10 new products were identified, in which 2-amino-5-methoxypyrimidine (AMP) was confirmed by its standard. The investigation of the oxidation process of SME indicated that most of the products were not stable and the degradation pathways were very complicated as multiple reactions, such as oxidation of the amino group, SO₂ extrusion, and potential cross-reaction occurred simultaneously. Though most of the products were not verified due to the lack of standards, our results could be helpful in the evaluation of the treatment performance of SAs containing wastewater.     

Clean and effective removal of Cl(-I) from strongly acidic wastewater by PbO2

Recycling strongly acidic wastewater as diluted H₂SO₄ after contaminants contained being removed was previously proposed, however, Cl(-I), a kind of contaminant contained in strongly acidic wastewater, is difficult to remove, which severely degrades the quality of recycled H₂SO₄. In this study, the removal of Cl(-I) using PbO₂ was investigated and the involved mechanisms were explored. The removal efficiency of Cl(-I) reached 93.38% at 50℃ when PbO₂/Cl(-I) mole ratio reached 2:1. The identification of reaction products shows that Cl(-I) was oxidized to Cl₂, and PbO₂ was reduced to PbSO₄. Cl₂ was absorbed by NaOH to form NaClO, which was used for the regeneration of PbO₂ from the generated PbSO₄. Cl(-I) was removed through two pathways, i.e., surface oxidation and •OH radical oxidation. •OH generated by the reaction of PbO₂ and OH⁻ plays an important role in Cl(-I) removal. The regenerated PbO₂ had excellent performance to remove Cl(-I) after six-time regeneration. This study provided an in-depth understanding on the effective removal of Cl(-I) by the oxidation method.