Penetration of polar brominated DBPs through the activated carbon columns during total organic bromine analysis

Total organic bromine (TOBr) is a collective parameter representing all the brominated organic disinfection byproducts (DBPs) in water samples. TOBr can be measured using the adsorption-pyrolysis method according to Standard Method 5320B. This method involves that brominated organic DBPs are separated from inorganic halides and concentrated from aqueous solution by adsorption onto the activated carbon (AC). Previous studies have reported that some commonly known brominated DBPs can partially penetrate through the AC during this adsorption step. In this work, the penetration of polar brominated DBPs through AC and ozone-modified AC was explored with two simulated drinking water samples and one chlorinated wastewater effluent sample. Polar brominated DBPs were selectively detected with a novel precursor ion scan method using electrospray ionization-triple quadrupole mass spectrometry. The results show that 3.4% and 10.4% of polar brominated DBPs (in terms of total ion intensity) in the chlorinated Suwannee River fulvic acid and humic acid samples, respectively, penetrated through the AC, and 19.6% of polar brominated DBPs in the chlorinated secondary wastewater effluent sample penetrated through the AC. The ozone-modification of AC minimized the penetration of polar brominated DBPs during the TOBr analysis.     

Aerosol size distributions in urban Jinan: Seasonal characteristics and variations between weekdays and weekends in a heavily polluted atmosphere

Aerosol size distributions, trace gas, and PM(2.5) concentrations have been measured in urban Jinan, China, over 6 months in 2007 and 2008, covering spring, summer, fall, and winter time periods. Number concentrations of particles (10-2,500 nm) were 16,200, 13,900, 11,200, and 21,600 cm(?-3) in spring, summer, fall, and winter, respectively. Compared with other urban studies, Jinan has higher number concentrations of accumulation-mode particles (100-500 nm) and particles (10-2,500 nm), but lower concentrations of ultrafine particles (10-100 nm). The number, surface and volume concentrations, and size distributions of particles showed obvious seasonal variation and are also influenced by traffic emissions. Through correlation analysis, traffic emissions are proposed to be a more important contributor to Atkien-mode and accumulation-mode particles than coal firing. Around midday, the presence of nanoparticles and new particle formation is limited to pre-existing particles from traffic emissions and the mass transport of particles from suburban and rural areas. Compared with other studies in urban areas of Europe and the USA, the variation of particle number concentration and related gas concentration in Jinan between weekdays and weekends is smaller and the reasons has been deduced.     

Mobilization and plant accumulation of prometryne in soil by two different sources of organic matter

Prometryne is a selective herbicide of the s-triazine chemical family. Due to its weak absorption onto soil, it readily leaches down through the soil and contaminates underground water. Application of organic manure to soil has become a widespread practice as a disposal strategy to improve soil properties. In this study, we demonstrated the effect of pig manure compost (PMC) and lake-bed sludge (SL) on the sorption/desorption, mobility and bioavailability of prometryne in soil using comprehensive analysis approaches. Downward movement of prometryne was monitored in the packed soil column. Addition of PMC or SL decreased considerably the mobility and total concentration of prometryne in the soil leachate. Bioavailability analyses with wheat plants revealed that addition of the organic matter reduced accumulation of prometryne in tissues and increased plant elongation and biomass. These results indicate that the organic amendments are effective in modifying adsorption and mobility of the pesticide in soil.     

Characteristics of particulate matter pollution in the Pearl River Delta region, China: an observational-based analysis of two monitoring sites

Two-year monitoring data (2006 and 2009), collected at the sub-urban site (WQS) and the background site (TH), were used to study the characteristics of Particulate Matter (PM) pollution in the Pearl River Delta region, China. Similar levels of PM(2.5) concentration measured at both sites seem to confirm that the fine particles have emerged as a major regional pollution issue. The seasonal variation of PM(2.5) concentration is associated with the regional monsoon circulations while the diurnal variation is related to land-sea breeze, traffic emissions and boundary layer development. Negative correlation was found in PM(2.5)-wind speed and PM(2.5)-humidity. Analysis of radiation, temperature and ozone suggests the existence of secondary aerosol formation. Transport effect may be another contributing factor to high PM pollution in the region, such as occasional long-distance dust intrusion and trans-boundary effects from upwind areas.     

Polycyclic aromatic hydrocarbons and organochlorine pesticides in surface soils from the Qinghai-Tibetan plateau

Eighty eight surface soil samples were collected from the Qinghai-Tibetan Plateau (QTP) for determination of polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs), including dichlorodiphenyltrichloroethane and metabolites (DDXs) and hexachlorocyclohexane isomers (HCHs). The measured concentrations were 51.8 ± 38.5 ng g(-1), 0.329 ± 0.818 ng g(-1), and 0.467 ± 0.741 ng g(-1) as means and standard deviations of PAHs, DDXs, and HCHs, respectively, which were 1-2 orders of magnitude lower than those reported for eastern China. Significant differences were also revealed among four sub-areas within QTP. PAHs detected in the samples from the remote sub-areas of T'ang-ku-la/Hoh Xil Mountains and along the Qinghai-Tibet highway in the west and northwest of QTP were 1 order of magnitude lower than those from Lhasa and east Qinghai. The differences in soil OCPs among the sub-areas were 2-7 times. Soil PAHs were significantly correlated with emission density and soil organic carbon content (SOC), while OCPs were correlated significantly with the population density and SOC. Based on the calculated backward air mass trajectories and geographical distributions of emission and population, it was revealed that PAHs and OCPs accumulated in the soils in the west and northwest QTP were primarily from long-range transport and may represent the background levels of East Asia. This part of QTP can also serve as an important receptor area for regional or even global long-range transport study. The elevated concentrations of PAHs and OCPs in Lhasa and east Qinghai were mainly from local sources, while PAHs from adjacent Lanzhou area also contributed considerably to the accumulation of PAHs in east Qinghai.     

Effectiveness of amendments on re-acidification and heavy metal immobilization in an extremely acidic mine soil

Previous studies have shown that the application of soil amendments is efficient in reducing acidity and heavy metal bioavailability in mine soils. However, it remains a challenge for environmentalists to predict accurately and control economically the re-acidification in re-vegetated mine soils. In this study, net acid generation (NAG) test and bioassay technique were employed to assess the effectiveness of the amendments [including lime, N-P-K (nitrogen, phosphorous and potassium) fertilizer, phosphate and river sediment] on re-acidification and heavy metal immobilization in an extremely acid (pH < 3) mine soil. Our results suggested that NAG test was a rapid and accurate approach to assess the effectiveness of the amendments on re-acidification potential of the mine soil. Interestingly, it was found that phosphate and river sediment played quite specific roles in preventing the re-acidification in the mine soil. In addition, the results also indicated that the addition of 25 t ha(-1) lime combined with river sediment (30%) might be an economical method to successfully control the acidification and re-acidification in the extremely acid mine soil, allowing the re-establishment of the plants. Collectively, our results implied that the combined use of NAG test and bioassay assessment was effective in evaluating a reclamation strategy for extremely acidic mine soils.     

Chemical techniques for assessing bioavailability of sediment-associated contaminants: SPME versus Tenax extraction

The traditional approach for predicting the risk of hydrophobic organic contaminants (HOCs) in sediment is to relate organic carbon normalized sediment concentrations to body residues or toxic effects to organisms. However, due to the multiple variables controlling bioavailability, this method has limitations. A matrix independent method of predicting bioavailability needs to be used in order to be universally applicable. Both chemical activity (freely dissolved chemical concentrations) measured by solid-phase microextraction (SPME) and bioaccessibility (rapidly desorbing fraction) estimated by Tenax extraction have been developed to predict bioavailability of sediment-associated HOCs. The objectives of this review are to summarize a number of studies using matrix-SPME or Tenax extraction to estimate bioavailability and/or toxicity of different classes of HOCs and evaluate the strengths and weakness of these two techniques. Although the two chemical techniques assess different components of the matrix, estimates obtained from both techniques have been correlated to organism body residues. The advantages of SPME fibers are their applicability for use in situ and their potential usage for a wide array of contaminants by selection of appropriate coatings. Single time-point Tenax extraction, however, is more time- and labor-effective. Tenax extraction also has lower detection limits, making it more applicable for highly toxic contaminants. This review also calls for additional research to evaluate the role of sequestrated contaminants and ingestion of sediment particles by organisms on HOC bioavailability. The use of performance reference compounds to reduce SPME sampling time and linking chemical based bioavailability estimates to toxicological endpoints are essential to expand the applications of these methods.     

Short-range transport of contaminants released from e-waste recycling site in South China

The transport behaviors of a suite of contaminants released from electronic waste (e-waste) recycling operations, including polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), and heavy metals, were evaluated by analyzing the contaminant residues in surface soils sampled in the surrounding area of an e-waste recycling site in South China. Concentrations of PBDEs and PCBs in the soil samples ranged from 0.565 to 2908 ng g(-1) dw and from 0.267 to 1891 ng g(-1) dw, respectively, while soil residues were 0.082-2.56, 3.22-287, and 16.3-162 μg g(-1) dw for Cd, Cu, and Pb, respectively. Concentrations of PBDEs and PCBs in soil decreased with increasing distance from the source of pollution, indicating possible PBDE and PCB contamination in the surrounding areas due to the short-range transport of these compounds from the e-waste recycling site. Although no significant difference in the short-range transport potential among PBDE and PCB congeners was observed, reductions in concentrations of the highly-brominated-BDEs and highly-chlorinated-CBs were slightly quicker than those of their less-halogen-substituted counterparts. Conversely, heavy metals showed the lowest transport potential due to their low vapor pressure, and results showed metals would remain near the pollution source instead of diffusing into the surrounding areas. Finally, mass inventories in areas near the e-waste site were 0.920, 0.134, 0.860, 4.68, 757, and 673 tons for BDE209, PBDEs (excluding BDE209), PCBs, Cd, Cu, and Pb, respectively.     

Characteristics of CO2 release from forest soil in the mountains near Beijing

CO₂ release from forest soil is a key driver of carbon cycling between the soil and atmosphere ecosystem. The rate of CO₂ released from soil was measured in three forest stands (in the mountainous region near Beijing, China) by the alkaline absorption method from 2004 to 2006. The rate of CO₂ released did not differ among the three stands. The CO₂ release rate ranged from ??341 to 1,193 mg m^???2 h^???1, and the mean value over all three forests and sampling times was 286 mg m^???2 h^???1. CO₂ release was positively correlated with soil water content and the soil temperature. Diurnally, CO₂ release was higher in the day than at night. Seasonally, CO₂ release was highest in early autumn and lowest in winter; in winter, negative values of CO₂ release suggested that CO₂ was absorbed by soil.     

Biomonitoring of testate amoebae (protozoa) as toxic metals absorbed in aquatic bryophytes from the Hg-Tl mineralized area (China)

A new method has been developed for the determination of chemical oxygen demand (COD) in pulping effluent using chemometrics-assisted spectrophotometry. Two calibration models were established by inducing UV-visible spectroscopy (model 1) and derivative spectroscopy (model 2), combined with the chemometrics software Smica-P. Correlation coefficients of the two models are 0.9954 (model 1) and 0.9963 (model 2) when COD of samples is in the range of 0 to 405 mg/L. Sensitivities of the two models are 0.0061 (model 1) and 0.0056 (model 2) and method detection limits are 2.02?C2.45 mg/L (model 1) and 2.13?C2.51 mg/L (model 2). Validation experiment showed that the average standard deviation of model 2 was 1.11 and that of model 1 was 1.54. Similarly, average relative error of model 2 (4.25%) was lower than model 1 (5.00%), which indicated that the predictability of model 2 was better than that of model 1. Chemometrics-assisted spectrophotometry method did not need chemical reagents and digestion which were required in the conventional methods, and the testing time of the new method was significantly shorter than the conventional ones. The proposed method can be used to measure COD in pulping effluent as an environmentally friendly approach with satisfactory results.