Dry scrubbing of municipal solid waste incineration flue gas using porous sodium carbonate produced via vacuum thermal treatment of sodium bicarbonate

Journal of Material Cycles and Waste Management - Sodium bicarbonate is among the alkali chemicals used for dry scrubbing in incineration flue gas treatment. It is generally pulverized into fine...     

Comparison of endotoxin levels and gram-negative bacteria under different conditions in microbial laboratories and a biowaste site

In this study, we assessed airborne endotoxin levels in university laboratories, hospital diagnostic laboratories, and a biowaste site. We also investigated indoor and outdoor sampling, sampling site, type of ventilation system, presence of open biowaste boxes, weather, and detection of Gram-negative bacteria (GNB). A total of 69 air samples were collected from 11 facilities in three institutions. Average total airborne endotoxin levels ranged from <0.01 to 10.02 EU m⁻³, with an overall mean of 1.03 EU m⁻³. Endotoxin levels were high in window-ventilated facilities, in facilities in which GNB were detected; levels were also high when it was rainy (all ps < 0.05). Endotoxin levels were significantly correlated with humidity (r = 0.70, p < 0.01). The presence of HVAC; humidity; and the presence of open biowaste boxes affect endotoxin levels in laboratories.     

Modelling of a large-scale urban contamination situation and remediation alternatives

The Urban Remediation Working Group of the International Atomic Energy Agency's EMRAS (Environmental Modelling for Radiation Safety) program was organized to address issues of remediation assessment modelling for urban areas contaminated with dispersed radionuclides. The present paper describes the first of two modelling exercises, which was based on Chernobyl fallout data in the town of Pripyat, Ukraine. Modelling endpoints for the exercise included radionuclide concentrations and external dose rates at specified locations, contributions to the dose rates from individual surfaces and radionuclides, and annual and cumulative external doses to specified reference individuals. Model predictions were performed for a “no action” situation (with no remedial measures) and for selected countermeasures. The exercise provided a valuable opportunity to compare modelling approaches and parameter values, as well as to compare the predicted effectiveness of various countermeasures with respect to short-term and long-term reduction of predicted doses to people.     

Sequential soil washing techniques using hydrochloric acid and sodium hydroxide for remediating arsenic-contaminated soils in abandoned iron-ore mines

Sequential washing techniques using single or dual agents [sodium hydroxide (NaOH) and hydrochloric acid (HCl) solutions] were applied to arsenic-contaminated soils in an abandoned iron-ore mine area. We investigated the best remediation strategies to maximize arsenic removal efficiency for both soils and arsenic-containing washing solution through conducting a series of batch experiments. Based on the results of a sequential extraction procedure, most arsenic prevails in Fe-As precipitates or coprecipitates, and iron exists mostly in the crystalline forms of iron oxide. Soil washing by use of a single agent was not effective in remediating arsenic-contaminated soils because arsenic extractions determined by the Korean standard test (KST) methods for washed soils were not lower than 6mg kg(-1) in all experimental conditions. The results of X-ray diffraction (XRD) indicated that iron-ore fines produced mobile colloids through coagulation and flocculation in water contacting the soils, containing dissolved arsenic and fine particles of ferric arsenate-coprecipitated silicate. The first washing step using 0.2M HCl was mostly effective in increasing the cationic hydrolysis of amorphous ferrihydrite, inducing high removal of arsenic. Thus, the removal step of arsenic-containing flocs can lower arsenic extractions (KST methods) of washed soils. Among several washing trials, alternative sequential washing using 0.2M HCl followed by 1M HCl (second step) and 1M NaOH solution (third step) showed reliable and lower values of arsenic extractions (KST methods) of washed soils. This washing method can satisfy the arsenic regulation of washed soil for reuse or safe disposal application. The kinetic data of washing tests revealed that dissolved arsenic was easily readsorbed into remaining soils at a low pH. This result might have occurred due to dominant species of positively charged crystalline iron oxides characterized through the sequential extraction procedure. However, alkaline extraction using NaOH was effective in removing arsenic readsorbed onto the surface of crystalline minerals. This is because of the ligand displacement reaction of hydroxyl ions with arsenic species and high pH conditions that can prevent readsorption of arsenic.     

Effect of expandable clays and cometabolism on PAH biodegradability

Pyrene and phenanthrene degradation was examined in both single and binary slurry systems for three different natural soils. It was found that the amount of total expandable clays (smectite and vermiculite) was in a good agreement with the achieved rate and extent of biodegradation. For instance, the intrinsic phenanthrene biodegradation rate was 626 microg/L/day for the soil with the largest expandable clay and 3203 microg/L/day for the soil with the least. Similarly, the smallest total pyrene biodegradation (65%) was found for the soil rich in expandable clays, compared to an 82% pyrene reduction in the soil that had the lowest amount. Mass transfer limitation after compound sorption to the clays was more pronounced for the more hydrophobic pyrene. In the presence of phenanthrene, total pyrene biodegradation increased by 2 to 7% due to cometabolism, while the total phenanthrene biodegradation was only enhanced by 0.5 to 5% in the binary system. This research demonstrated that expandable clays might govern the substrate availability to microorganisms and microbial accessibility to substrates. Therefore, the contribution of organic matter and expandable clays to sorption, desorption and biodegradation should be taken equally into account in order to better understand complex bioremediation issues.     

Redundant Measurements of Urban Air Monitoring Networks in Air Quality Reporting

Abstract

This paper describes a statistical method to assess site redundancy of urban air monitoring networks in reporting daily Pollutant Standards Index (PSI), average concentrations, and the number of exceedances. Such a statistical method has identified significant redundancy in monitoring sites for one-year measurements of two air monitoring networks in Taiwan. There are five redundant sites out of 15 monitoring sites in the Taipei area and eight redundant sites out of 18 monitoring sites in the Kaohsiung area. By using the statistical method presented in this paper to downsize the monitoring networks, we can determine not only the number of redundant sites but also the priority of site removals. The derived sub-networks can maintain consistency in reporting air quality without significant changes in the spatial variations of air measurements for an existing air monitoring network.     

Nitrogen oxide emission calculation for post-Panamax container ships by using engine operation power probability as weighting factor: A slow-steaming case

In this study, the nitrogen oxide (NO_x) emission factors and total NO_x emissions of two groups of post-Panamax container ships operating on a long-term slow-steaming basis along Euro–Asian routes were calculated using both the probability density function of engine power levels and the NO_x emission function. The main engines of the five sister ships in Group I satisfied the Tier I emission limit stipulated in MARPOL (International Convention for the Prevention of Pollution from Ships) Annex VI, and those in Group II satisfied the Tier II limit. The calculated NO_x emission factors of the Group I and Group II ships were 14.73 and 17.85 g/kWhr, respectively. The total NO_x emissions of the Group II ships were determined to be 4.4% greater than those of the Group I ships. When the Tier II certification value was used to calculate the average total NO_x emissions of Group II engines, the result was lower than the actual value by 21.9%. Although fuel consumption and carbon dioxide (CO₂) emissions were increased by 1.76% because of slow steaming, the NO_x emissions were markedly reduced by 17.2%. The proposed method is more effective and accurate than the NO_x Technical Code 2008. Furthermore, it can be more appropriately applied to determine the NO_x emissions of international shipping inventory.

Implications: The usage of operating power probability density function of diesel engines as the weighting factor and the NO_x emission function obtained from test bed for calculating NO_x emissions is more accurate and practical. The proposed method is suitable for all types and purposes of diesel engines, irrespective of their operating power level. The method can be used to effectively determine the NO_x emissions of international shipping and inventory applications and should be considered in determining the carbon tax to be imposed in the future.     

Outdoor tobacco smoke exposure at the perimeter of a tobacco-free university

There are few studies measuring exposure to outdoor tobacco smoke (OTS). Tobacco users often gather at the boundaries of tobacco-free campuses, resulting in unintended consequences. The objective of this study was to measure exposure levels from OTS on sidewalks bordering a tobacco-free university campus. Data were collected while walking along a sidewalk adjacent to a medium traffic road between May and August 2011. Monitoring occurred during “background,” “stop,” and “walk-through” conditions at and near hot spot area to measure fine particulate matter (<2.5 μm; PM_2.5) from OTS using a portable aerosol monitor. The average PM_2.5 levels during stop and walk-through conditions were significantly higher than during background conditions. PM_2.5 peak occurrence rate and magnitude of peak concentration were significantly different depending on smoking occurrence. The peak occurrence rate during the stop condition was 10.4 times higher than during the background condition, and 3.1 times higher than during the walk-through condition. Average peak PM_2.5 concentrations during the stop condition were 48.7% higher than during the background condition. In conclusion, individuals could be exposed to high levels of PM_2.5 when stopping or even passing by smokers outdoors at the perimeter of tobacco-free campuses. The design and implementation of tobacco-free campus policies need to take into account the unintended consequences of OTS exposure at the boundaries.

Implications:In this study, outdoor tobacco smoke (OTS) exposure was measured at the perimeter of tobacco-free campus. OTS exposure could be determined by peak analysis. Peak occurrence rate and peak concentration for OTS exposure were identified by using peak analysis. People could be exposed to high levels of PM_2.5 when standing or even passing by smokers at the perimeter of tobacco-free campus. OTS exposure measurement in other outdoor locations with smokers is needed to support outdoor smoking regulation.     

羧甲基—β—环糊精的合成及对卤代芳烃的增溶研究

本文报道了羧甲基－β－环糊精的一种简便合成方法,并研究了羧甲基－β－环糊精对卤代芳烃类化合物的增溶作用。羧甲基－β－环糊精能与水以任意比例互溶其水溶液对卤代芳烃有明显的增溶作用。增溶作用的大小主要与卤代芳烃的疏水性及分子的几何形状与环糊精空腔的匹配程度有关。     

Bioremediation of diesel-contaminated soil with composting

The major objective of this research was to find the appropriate mix ratio of organic amendments for enhancing diesel oil degradation during contaminated soil composting. Sewage sludge or compost was added as an amendment for supplementing organic matter for composting of contaminated soil. The ratios of contaminated soil to organic amendments were 1:0.1, 1:0.3, 1:0.5, and 1:1 as wet weight basis. Target contaminant of this research was diesel oil, which was spiked at 10,000 mg/kg sample on a dry weight basis. The degradation of diesel oil was significantly enhanced by the addition of these organic amendments relative to straight soil. Degradation rates of total petroleum hydrocarbons (TPH) and n-alkanes were the greatest at the ratio of 1:0.5 of contaminated soil to organic amendments on wet weight basis. Preferential degradation of n-alkanes over TPH was observed regardless of the kind and the amount of organic amendments. The first order degradation constant of n-alkanes was about twice TPH degradation constant. Normal alkanes could be divided in two groups (C10-C15 versus C16-C20) based on the first order kinetic constant. Volatilization loss of TPH was only about 2% of initial TPH. Normal alkanes lost by volatilization were mainly by the compounds of C10 to C16. High correlations (r=0.80-0.86) were found among TPH degradation rate, amount of CO2 evolved, and dehydrogenase activity.