Redundant Measurements of Urban Air Monitoring Networks in Air Quality Reporting

Abstract

This paper describes a statistical method to assess site redundancy of urban air monitoring networks in reporting daily Pollutant Standards Index (PSI), average concentrations, and the number of exceedances. Such a statistical method has identified significant redundancy in monitoring sites for one-year measurements of two air monitoring networks in Taiwan. There are five redundant sites out of 15 monitoring sites in the Taipei area and eight redundant sites out of 18 monitoring sites in the Kaohsiung area. By using the statistical method presented in this paper to downsize the monitoring networks, we can determine not only the number of redundant sites but also the priority of site removals. The derived sub-networks can maintain consistency in reporting air quality without significant changes in the spatial variations of air measurements for an existing air monitoring network.     

The Fate of Hydrogen Peroxide as an Oxygen Source for Bioremediation Activities within Saturated Aquifer Systems

ABSTRACT

In situ bioremediation is an innovative technique for the remediation of contaminated aquifers that involves the use of microorganisms to remediate soils and groundwaters polluted by hazardous substances. During its application, this process may require the addition of nutrients and/or electron acceptors to stimulate appropriate biological activity. Hydrogen peroxide has been commonly used as an oxygen source because of the limited concentrations of oxygen that can be transferred into the groundwater using above-ground aeration followed by reinjection of the oxygenated groundwater into the aquifer or subsurface air sparging of the aquifer. Because of several potential interactions of H₂O₂ with various aquifer material constituents, its decomposition may be too rapid, making effective introduction of the H₂O₂ into targeted treatment zones extremely difficult and costly. Therefore, a bench-scale study was conducted to determine the fate of H₂O₂ within subsurface aquifer environments. The purpose of this investigation was to identify those aquifer constituents, both biotic and abiotic, that are most active in controlling the fate of H₂O₂. The decomposition rates of H₂O₂ were determined using both equilibrated water samples and soil slurries. Results showed H₂O₂ decomposition to be effected by several commonly found inorganic soil components; however, biologically mediated catalytic reactions were determined to be the most substantial.     

Secondhand smoke exposure is associated with smoke-free laws but not urban/rural status

The objective was to determine secondhand smoke (SHS) exposure with and without smoke-free laws in urban and rural communities. The research hypothesis was that SHS exposure in public places could be improved by smoke-free law regardless of urban and rural status. Indoor air quality in hospitality venues was assessed in 53 communities (16 urban and 37 rural) before smoke-free laws; 12 communities passed smoke-free laws during the study period. Real-time measurements of particulate matter with 2.5 µm aerodynamic diameter or smaller (PM_2.5) were taken 657 times from 586 distinct venues; about 71 venues had both pre- and post-law measurements. Predictors of log-transformed PM_2.5 level were determined using multilevel modeling. With covariates of county-level percent minority population, percent with at least high school education, adult smoking rate, and venue-level smoker density, indoor air quality was associated with smoke-free policy status and venue type and their interaction. The geometric means for restaurants, bars, and other public places in communities without smoke-free policies were 22, 63, and 25 times higher than in those with smoke-free laws, respectively. Indoor air quality was not associated with urban status of venue, and none of the interactions involving urban status were significant. SHS exposure in public places did not differ by urban/rural status. Indoor air quality was associated with smoke-free law status and venue type.

Implications:?This study analyzed 657 measurements of indoor PM_2.5 level in 53 communities in Kentucky, USA. Although indoor air quality in public places was associated with smoke-free policy status and venue type, it did not differ by urban and rural status. The finding supports the idea that population in rural communities can be protected with smoke-free policy. Therefore, it is critical to implement smoke-free policy in rural communities as well as urban areas.     

Comparison of endotoxin levels and gram-negative bacteria under different conditions in microbial laboratories and a biowaste site

In this study, we assessed airborne endotoxin levels in university laboratories, hospital diagnostic laboratories, and a biowaste site. We also investigated indoor and outdoor sampling, sampling site, type of ventilation system, presence of open biowaste boxes, weather, and detection of Gram-negative bacteria (GNB). A total of 69 air samples were collected from 11 facilities in three institutions. Average total airborne endotoxin levels ranged from <0.01 to 10.02 EU m⁻³, with an overall mean of 1.03 EU m⁻³. Endotoxin levels were high in window-ventilated facilities, in facilities in which GNB were detected; levels were also high when it was rainy (all ps < 0.05). Endotoxin levels were significantly correlated with humidity (r = 0.70, p < 0.01). The presence of HVAC; humidity; and the presence of open biowaste boxes affect endotoxin levels in laboratories.     

Case study in Korea of manufacturing SRF for polyurethanes recycling in e-wastes

Statistics showed that approximately 1,195,000 refrigerator units (116,094 metric tons) were recycled annually in Korea’s formal sector. Although the recycling level for these was satisfactory, collecting and processing polyurethane at recycling centers (RCs) posed several problems, including the risk of fire from the incinerator, the generation of fugitive dust, and the high cost of disposal. The objective of our study is to provide an overview of refrigerator recycling and to introduce polyurethane solid refuse fuel (SRF) manufacturing facilities. These facilities, installed at four regional RCs in Korea, have a capacity of 800 kg/h, a motor of 476 kWh, and cost $664,300 (USD) to construct (criteria two facilities). According to our examination of the physico-chemical properties of SRF product, all results in categories have been satisfied with the quality standards. In terms of finances, RCs can reduce the total disposal cost from $160–175 to $60 by installing facilities, which results in savings of (on average) $180,546 annually. The Metropolitan Electronics Recycling Center, for example, has reduced its costs by $180,880 each year. Their return on investment was calculated to be about 3 years and 8 months (assuming no operating expenses) or 7 years and 4 months (including operating expenses).     

Nitrogen oxide emission calculation for post-Panamax container ships by using engine operation power probability as weighting factor: A slow-steaming case

In this study, the nitrogen oxide (NO_x) emission factors and total NO_x emissions of two groups of post-Panamax container ships operating on a long-term slow-steaming basis along Euro–Asian routes were calculated using both the probability density function of engine power levels and the NO_x emission function. The main engines of the five sister ships in Group I satisfied the Tier I emission limit stipulated in MARPOL (International Convention for the Prevention of Pollution from Ships) Annex VI, and those in Group II satisfied the Tier II limit. The calculated NO_x emission factors of the Group I and Group II ships were 14.73 and 17.85 g/kWhr, respectively. The total NO_x emissions of the Group II ships were determined to be 4.4% greater than those of the Group I ships. When the Tier II certification value was used to calculate the average total NO_x emissions of Group II engines, the result was lower than the actual value by 21.9%. Although fuel consumption and carbon dioxide (CO₂) emissions were increased by 1.76% because of slow steaming, the NO_x emissions were markedly reduced by 17.2%. The proposed method is more effective and accurate than the NO_x Technical Code 2008. Furthermore, it can be more appropriately applied to determine the NO_x emissions of international shipping inventory.

Implications: The usage of operating power probability density function of diesel engines as the weighting factor and the NO_x emission function obtained from test bed for calculating NO_x emissions is more accurate and practical. The proposed method is suitable for all types and purposes of diesel engines, irrespective of their operating power level. The method can be used to effectively determine the NO_x emissions of international shipping and inventory applications and should be considered in determining the carbon tax to be imposed in the future.     

Improving the quality of waste-derived char by removing ash

This study characterized and removed ash from waste-derived char to improve the quality of char as fuel. Municipal solid waste (MSW) and automobile shredder residue (ASR) were carbonized at 450 degrees C and at 500 degrees C, respectively, in a rotary kiln with a nitrogen atmosphere for 1h. MSW and ASR char were subjected to sieving and pulverization-sieving to screen incombustibles and the ash-rich fraction, after which float-sink separation, froth floatation, and oil agglomeration were applied to remove ash from the char. The established target quality was (1) less than 30% ash content and (2) more than 20,000 kJ/kg heating value. However, the rate of combustibles recovery had to be lowered to produce a good quality of char along with a high heating value. MSW char attained the targeted quality level using froth floatation or oil agglomeration, whereas, neither separation method was able to make ASR-derived char satisfy the target. Based on the assumption that particle properties of char are determined by the weight ratio of combustibles and ash, the densities of combustibles and ash in char were estimated using the results of float-sink separation, X-ray diffraction (XRD) analysis, and elemental content. To verify the above assumption, an energy dispersive X-ray/scanning electron microscope (EDX/SEM) analyzer was used to observe char particles.     

A study on engineering characteristics of asphalt concrete using filler with recycled waste lime

This study focuses on determining the engineering characteristics of asphalt concrete using mineral fillers with recycled waste lime, which is a by-product of the production of soda ash (Na(2)CO(3)). The materials tested in this study were made using a 25%, 50%, 75%, and 100% mixing ratio based on the conventional mineral filler ratio to analyze the possibility of using recycled waste lime. The asphalt concretes, made of recycled waste lime, hydrated lime, and conventional asphalt concrete, were evaluated through their fundamental engineering properties such as Marshall stability, indirect tensile strength, resilient modulus, permanent deformation characteristics, moisture susceptibility, and fatigue resistance. The results indicate that the application of recycled waste lime as mineral filler improves the permanent deformation characteristics, stiffness and fatigue endurance of asphalt concrete at the wide range of temperatures. It was also determined that the mixtures with recycled waste lime showed higher resistance against stripping than conventional asphalt concrete. It was concluded from various test results that a waste lime can be used as mineral filler and, especially, can greatly improve the resistance of asphalt concrete to permanent deformation at high temperatures.     

Manganese peroxidase-catalyzed oxidative degradation of vanillylacetone

When 4-(4-hydroxy-3-methoxy-phenyl)-2-butanone (vanillylacetone) was tested for manganese peroxidase (MnP)-catalyzed oxidation, it was found to be degraded with the cleavage of an aromatic ring. Among numerous products of vanillylacetone oxidation, four major ones were purified by thin-layer chromatography and identified using mass spectroscopy (MS) and nuclear magnetic resonance (NMR) analysis. Three of them maintained the aromatic ring structure and were identified as 4-[6,2'-dihydroxy-5,3'-dimethoxy-5'-(3-oxo-butyl)-biphenyl]-butan-2-one, 4-(4-hydroxy-3-methoxyphenyl)-3-buten-2-one, and 4-[6,2'-dihydroxy-5,3'-dimethoxy-5'-(3-oxo-butyl)-biphenyl]-3-buten-2-one. Even though the fourth product could not be purified to a single compound, data from infrared spectroscopy showed that it did not have a benzene ring. From MS and NMR analysis, 3-(3-oxo-butyl)-hexa-2,4-dienedioic acid-1-methyl ester was tentatively suggested as the dominant species. The reaction mechanism was suggested on the basis of the structural information of these products. To our knowledge, this paper is the first report on aromatic ring cleavage of the phenolic compound by MnP.     

Two-generation toxicity study on the copepod model species Tigriopus japonicus

Previous studies on the intertidal copepod Tigriopus japonicus have demonstrated that it is a suitable model species for the assessment of acute toxicities of marine pollutants. In order to standardize T. japonicus for use in environmental risk assessment involving whole life cycle exposure, we tested nine pollutants for their effects on growth and reproduction during a two-generation life cycle exposure test. Nauplii (F 0) were exposed to a range of concentrations of each chemical in a static renewal culture system. Broods of the second generation (F1) were subsequently exposed to the same concentrations for one full life cycle. Of the seven traits (nauplius phase, development time, survival, sex ratio, number of clutch, nauplii per clutch and fecundity), only the length of the nauplius phase and development time showed a greater sensitivity to chemical exposure. Between the two sensitive traits, the period of the nauplius phase was more sensitive than cohort generation time. Biocides significantly increased the maturation period of nauplii as well as copepodids in F 0 generation. In this study, it was demonstrated that T. japonicus could also be used in reproduction and life cycle tests and it provides an opportunity for testing the chronic and subchronic toxic effects of marine pollutants. Further validation and harmonization in a multi-centric study involving other laboratories of the region will strengthen its use as a supplement to existing model species.