Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.     

Review of the progress in preparing nano Ti02： An important environmental engineering material

TiO2 nanomaterial is promising with its high potential and outstanding performance in photocatalytic environmental applications, such as CO2 conversion, water treatment, and air quality control. For many of these applications, the particle size, crystal structure and phase, porosity, and surface area influence the activity of TiO2 dramatically. TiO2 nanomaterials with special structures and morphologies, such as nanospheres, nanowires, nanotubes, nanorods, and nanoflowers are thus synthesized due to their desired characteristics. With an emphasis on the different morphologies of TiO2 and the influence factors in the synthesis, this review summarizes fourteen TiO2 preparation methods, such as the sol-gel method, solvothermal method, and reverse micelle method. The TiO2 formation mechanisms, the advantages and disadvantages of the preparation methods, and the photocatalytic environmental application examples are proposed as well.     

Aerobic granules cultivated and operated in continuous-flow bioreactor under particle-size selective pressure

A novel method based on the selective pressure of particle size （particle-size cultivation method, PSCM） was developed for the cultivation and operation of aerobic granular sludge in a continuous-flow reactor, and compared with the conventional method based on the selective pressure of settling velocity （settling-velocity cultivation method, SVCM）. Results indicated that aerobic granules could be cultivated in continuous operation mode by this developed method within 14 days. Although in the granulation process, under particle-size selective pressure, mixed liquor suspended solids （MLSS） in the reactor fluctuated greatly and filamentous bacteria dominated the sludge system during the initial operation days, no obvious difference in profile was found between the aerobic granules cultivated by PSCM and SVCM. Moreover, aerobic granules cultivated by PSCM presented larger diameter, lower water content and higher specific rates of nitrification, denitrifieation and phosphorus removal, but lower settling velocity. Under long term operation of more than 30 days, aerobic granules in the continuous-flow reactor could remain stable and obtain good chemical oxygen demand （COD）, NH4^＋-N, total nitrogen （TN） and total phosphorus （TP） removal. The results indicate that PSCM was dependent on the cultivation and maintenance of the stability of aerobic granules in continuous-flow bioreactors.     

Phytoremediation of levonorgestrel in aquatic environment by hydrophytes

Adsorption and degradation of levonorgestrel （LNG） by two hydrophytes, Cyperus alternfolius （CA） and Eichhornia crassipes （EC）, were investigated under light-shielding conditions in the water column. Variations of LNG concentrations in water, plant root epidermis, root, stem and leaf of the plants were analyzed. The results indicated that the removal efficiency of LNG by hydrophytes over the period of 50 days was significantly greater than the blank control （p 〈 0.05）, with the removal rates of 79.80%± 3.10% and 78.86% ± 2.55% for CA and EC, respectively. Compared with bio-adsorption, bio-conversion of LNG was found to be the dominant elimination pathway, evidenced by relatively high conversion rates （77.31% ±2.68% for CA and 77.82% ± 2.95% for EC）, while the adsorption rates were lower （1.77% ± 0.90% for CA and 1.05% ± 0.40% for EC）. The bio-adsorption and conversion of LNG showed no significant differences between the two hydrophytes. Additionally, the mineralization on root epidermis played an important role in the reduction of LNG in water.     

基于HJ-1 CCD数据的海冰时空特征分析——以渤海辽东湾为例

基于环境减灾卫星(HJ-1)CCD数据,对比分析了CCD数据4个波段的不同地物波谱特征,构建了海冰遥感信息提取指数(SII),并将该指数作为一个特征参量与CCD数据的其他4个波段进行支持向量机分类,提取了2012/2013年海冰发展关键期的海冰时空变化信息,在此基础上,结合气象数据分析了2012/2013年冬季渤海辽东湾海冰灾害的时空分布特征。结果表明:海冰的冻结、融化、增长和减弱与冬季气候时空变化特征有密切关系;HJ-1CCD数据能有效提取海冰信息,是海冰监测的一种有效的数据源;基于SII指数的支持向量机遥感图像海冰分类方法对海冰的识别具有较高的精度,能够为海冰监测提供新的技术支撑。     

泥炭碱提取液E4/E6值表征泥炭腐殖化度及其古气候意义

采用AMS14C测年技术建立了哈尼泥炭地的年代序列,以泥炭碱提取液的E4/E6值(400nm和600nm处吸光度比值)来表征泥炭腐殖化度,并探讨其指示的古气候意义。研究结果表明:根据泥炭碱提取液E4/E6值与校正年龄的变化曲线,以及将其与哈尼泥炭400nm处吸光度直接表征腐殖化度的曲线进行对比,发现哈尼泥炭碱提取液的E4/E6值对古气候具有很好的指示意义,对全新世以来的气候突变事件以及前人研究的气候时期划分都能得到很好的对应,即哈尼泥炭碱提取液E4/E6值高,泥炭腐殖化度低,指示气候干冷,其E4/E6值低,泥炭腐殖化度高,指示气候暖湿。在今后的研究中,可结合E4/E6值来表征泥炭腐殖化度,并结合磁化率、孢粉等化学物理生物因子以及温度、湿度、水文、地质条件等其他因素来探讨泥炭腐殖化度对古气候的指示意义。     

2009～2012年全国交流输变电工程环保验收问题分析与对策

通过对全国2009—2012年交流输变电工程竣工环境保护验收执行情况的统计,分析了交流输变电工程竣工环保验收中存在的问题,并针对性地提出了相应的对策,探讨了交流输变电工程竣工环境保护验收工作需制定和完善技术标准;推行施工期环境监理;推行设计图纸备案制度等环境保护对策。     

节能降耗技术在污水处理中的应用

通过对污水泵进行变频调速改造及污水处理工艺优化,实现了污水处理的降耗节能。     

中国石化炼油企业QHSE管理体系典型建过程研究

总结了中国石化炼油企业构建QHSE管理体系的典型步骤和内容,描述了体系构建各阶段的工作和要求,并提出了构建QHSE管理体系过程中的关注要点.     

油品装卸过程静电特性研究

为了研究油品装卸过程中的静电危险性,在两个城市的油库和加油站对油品的装油、卸油过程,以及装油的油罐车从油库向加油站行驶的过程中,油罐车内油品的油面电位进行了静电检测。通过对大量油罐车内油面电位的检测数据分析可以看出,在正常装卸油过程中,油罐车内油品的油面电位远远小于标准所规定安全油面电位,有缩短稳油时间的可能性。