Pd/activated carbon sorbents for mid-temperature capture of mercury from coal-derived fuel gas

Higher concentrations of Hg can be emitted from coal pyrolysis or gasification than from coal combustion, especially elemental Hg. Highly efficient Hg removal technology from coal-derived fuel gas is thus of great importance. Based on the very excellent Hg removal ability of Pd and the high adsorption abilities of activated carbon（AC） for H2 S and Hg, a series of Pd/AC sorbents was prepared by using pore volume impregnation, and their performance in capturing Hg and H2 S from coal-derived fuel gas was investigated using a laboratory-scale fixed-bed reactor. The effects of loading amount, reaction temperature and reaction atmosphere on Hg removal from coal-derived fuel gas were studied. The sorbents were characterized by N2 adsorption, X-ray diffraction（XRD） and X-ray photoelectron spectroscopy（XPS）. The results indicated that the efficiency of Hg removal increased with the increasing of Pd loading amount, but the effective utilization rate of the active component Pd decreased significantly at the same time. High temperature had a negative influence on the Hg removal. The efficiency of Hg removal in the N2-H2S-H2-CO-Hg atmosphere（simulated coal gas） was higher than that in N2-H2S-Hg and N2-Hg atmospheres, which showed that H2 and CO, with their reducing capacity, could benefit promote the removal of Hg. The XPS results suggested that there were two different ways of capturing Hg over sorbents in N2-H2S-Hg and N2-Hg atmospheres.     

Characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China

To understand the pollution characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China, total suspended particulate(TSP) and PM10samples were collected in cities of Changsha, Zhuzhou and Xiangtan from December 2011 to January 2012, and heavy metals of Cd, Pb, Cr, and As were analyzed. It shows that the average TSP concentration in Changsha, Zhuzhou and Xiangtan were(183 ± 73),(201 ± 84) and(190 ± 66) μg/m3respectively, and the average PM10 were(171 ± 82),(178 ± 65) and(179 ± 55) μg/m3respectively. The lowest TSP and PM10concentrations occurred at the background Shaping site of Changsha. The average ratio of ρ(PM10)/ρ(TSP) was 91.9%, ranging from 81.3% to 98.9%. Concerning heavy metals, in TSP samples, the concentration of Cr, As, Cd and Pb were 28.8–56.5, 18.1–76.3, 3.9–26.1 and 148.0–460.9 ng/m3, respectively, while in PM10samples, were 16.4–42.1, 15.5–67.9, 3.3–22.2 and 127.9–389.3 ng/m3, respectively. The enrichment factor of Cd was the highest, followed by Pb and As, while that of Cr was the lowest.     

Evaluation of soil washing process with carboxymethyl-β-cyclodextrin and carboxymethyl chitosan for recovery of PAHs/heavy metals/fluorine from metallurgic plant site

Polycyclic aromatic hydrocarbons(PAHs)/heavy metals/fluorine(F) mixed-contaminated sites caused by abandoned metallurgic plants are receiving wide attention. To address the associated environmental problems,this study was initiated to investigate the feasibility of using carboxymethyl-β-cyclodextrin(CMCD) and carboxymethyl chitosan(CMC) solution to enhance ex situ soil washing for extracting mixed contaminants. Further,Tenax extraction method was combined with a first-three-compartment model to evaluate the environmental risk of residual PAHs in washed soil. In addition,the redistribution of heavy metals/F after decontamination was also estimated using a sequential extraction procedure. Three successive washing cycles using50 g/L CMCD and 5 g/L CMC solution were effective to remove 94.3% of total PAHs,93.2% of Pb,85.8% of Cd,93.4% of Cr,83.2% of Ni and 97.3% of F simultaneously. After the 3rd washing,the residual PAHs mainly existed as very slowly desorbing fractions,which were in the form of well-aged,well-sequestered compounds; while the remaining Pb,Cd,Cr,Ni and F mainly existed as Fe–Mn oxide and residual fractions,which were always present in stable mineral forms or bound to non-labile soil fractions. Therefore,this combined cleanup strategy proved to be effective and environmentally friendly.     

Acute and chronic toxic effects of Pb2+ on polychaete Perinereis aibuhitensis：Morphological changes and responses of the antioxidant system

Perinereis aibuhitensis was used to assess adverse biological effects caused by acute and chronic Pb2＋exposure in artificial seawater under controlled laboratory conditions. In 96-hr acute toxicity experiments,the morphological changes showed a positive time/dose-dependent tendency,and the 96-hr LC50 value of Pb2＋was 686.41 mg/L. The responses of enzymatic and non-enzymatic antioxidants in tissues including catalase（CAT）,peroxidase（POD）,superoxide dismutase（SOD）,glutathione peroxidase（GSH-PX）,malondialdehyde（MDA） and the content of total soluble protein（TSP）,were investigated on days 1,4,7 and 10 after Pb2＋exposure under chronic toxicity testing. Results showed that the activation of the antioxidant system in P. aibuhitensis depended on the Pb2＋concentration and the duration of exposure time.Specifically,POD and SOD activities were induced on the first day of the exposure and decreased to the control level on day 10 after exposure. Therefore,these two indexes could be used to indicate oxidative stress associated with P. aibuhitensis exposure to Pb2＋.     

Review of the progress in preparing nano Ti02： An important environmental engineering material

TiO2 nanomaterial is promising with its high potential and outstanding performance in photocatalytic environmental applications, such as CO2 conversion, water treatment, and air quality control. For many of these applications, the particle size, crystal structure and phase, porosity, and surface area influence the activity of TiO2 dramatically. TiO2 nanomaterials with special structures and morphologies, such as nanospheres, nanowires, nanotubes, nanorods, and nanoflowers are thus synthesized due to their desired characteristics. With an emphasis on the different morphologies of TiO2 and the influence factors in the synthesis, this review summarizes fourteen TiO2 preparation methods, such as the sol-gel method, solvothermal method, and reverse micelle method. The TiO2 formation mechanisms, the advantages and disadvantages of the preparation methods, and the photocatalytic environmental application examples are proposed as well.     

吸收法处理玉米深加工过程异味气体的实验研究

为解决玉米深加工过程中产生的异味气体造成的环境污染问题,采用吸收法对玉米深加工的废气中VOCs进行了处理实验,分别测定了不同吸收剂(清水、3%碱液、1.25%硫酸、森林之源除臭剂、烷基苯磺酸钠溶液、非离子型相转移试剂X溶液)对VOCs的去除效果,并和生物洗涤法进行比较分析,其中,0.03%非离子型相转移试剂溶液对玉米深加工废气中VOCs可以达到95%以上的去除效果,吸收液可送废水处理设施处理。     

低碳高氮污水处理应用技术研究

针对碳氮比小于7的污水,其碳源不能满足硝化与反硝化的要求这一问题,通过改变SBR工艺的运行方式、调解工艺参数等技术手段,使其能够达标处理此类工业废水,并通过某淀粉厂的工程实例进行了验证:采用改良的SBR工艺可以对低碳高氮污水进行有效的处理。     

上海某饮用水源地不同形态氮的时空分布研究

在2010~2012年进行的上海某水源地水质监测资料的基础上,应用纳氏试剂分光光度法等分析方法研究该水源地2011年1~10月总氮、氨氮、硝酸盐氮、亚硝酸盐氮等不同形态的氮素在水体中的空间分布规律及时间变化规律。并就其氮的来源、迁移转化机理和对氮的迁移转化有较大影响的因素进行研究和分析,得出该水库水体中各种形态氮以硝酸盐氮为主,平均占总氮的71.6%,氨氮及亚硝酸盐氮各占总氮的4.39%及0.95%;水体中的温度、光照条件、溶解氧、点位位置分布、水深等是影响各氮形态含量与分布的重要环境因子。     

沈阳市屠宰及肉类加工废水处理现状及技术对策

针对屠宰及肉类加工废水的水质水量特性,在调查沈阳市屠宰及肉类加工企业废水处理现状的基础上,指出目前,一些企业缺少污水处理设施、现有设施不能正常运转及运行费用高等问题,提出技术对策:对小规模的该类企业根据实际情况,建议采用污水外运,沉积物做农肥;或人工格栅-隔油沉淀-强化气浮的一级强化工艺;或人工格栅-隔油调节池-水解酸化池-生物接触氧化池的二级工艺。对大规模的企业根据实际情况,建议采用粗、细格栅-刮渣撇油平流沉淀池-高效气浮-水解酸化-SBR/A2 O/生物接触氧化-氧化塘/人工湿地/BAF工艺。     

可再生胺类脱硫剂的选择研究

采用哌嗪等二元胺和二乙醇胺为吸收剂,对模拟烟气进行SO2的吸收解吸实验研究,筛选出性能优异的吸收剂,并考察添加剂H2 S O 4对其性能的影响。实验表明:可再生胺类吸收剂脱硫率可接近100%,二元胺吸收剂较醇胺的SO 2吸收量大、pH值随时间变化慢、首次解吸率高;羟乙基支链对胺类吸收剂的抗氧化能力、SO2吸收量和首次解吸率均有影响,环状二元胺比链状二元胺的抗氧化能力好、首次解吸率高;在N-(2-羟乙基)哌嗪溶液中添加硫酸构成N-(2-羟乙基)哌嗪/H 2S O 4脱硫体系后,脱硫率未受影响、SO2吸收量变小、首次解吸率显著提高,具有更好的循环使用性能。