The contribution of azo dyes to the mutagenic activity of the Cristais River

To verify whether dyes emitted within the discharge of a dye processing plant were contributing to the mutagenicity repeatedly found in the Cristais River, Sao Paulo, Brazil, we chemically characterized the following mutagenic samples: the treated industrial effluent, raw and treated water, and the sludge produced by a Drinking Water Treatment Plant (DWTP) located approximately 6 km from the industrial discharge. Considering that 20% of the dyes used for coloring activities might be lost to wastewaters and knowing that several dyes have mutagenic activity, we decided to analyze the samples for the presence of dyes. Thin layer chromatographic analysis indicated the presence of three prevalent dyes in all samples, except for the drinking water. This combination of dyes corresponded to a commercial product used by the industry, and it tested positive in the Salmonella assay. The structures of the dye components were determined using proton magnetic resonance and mass spectrometric (MS) methods, and the dyes were tested for mutagenicity. The blue component was identified as the C.I. Disperse Blue 373, the violet as C.I. Disperse Violet 93, and the orange as C.I. Disperse Orange 37. The dyes showed mutagenic responses of 6300, 4600, and 280 revertants/microg for YG1041 with S9 respectively. A bioassay-directed fractionation/chemical analysis showed that the C.I. Disperse Blue 373 contributed 55% of the mutagenic activity of the DWTP sludge. We showed that these dyes contributed to the mutagenic activity found in the Cristais River environmental samples analyzed and are indirectly affecting the quality of the related drinking water. Therefore, we believe that this type of discharge should be more thoroughly characterized chemically and toxicologically. Additionally, human and ecological risks associated with the release of dye processing plant effluents should be more fully investigated, especially where the resultant water is taken for human consumption.     

Heterogeneous photocatalysis of aromatic and chlorinated volatile organic compounds (VOCs) for non-occupational indoor air application

The current study evaluated the technical feasibility of applying TiO2 photocatalysis to the removal of low-ppb concentrations of volatile organic compounds (VOCs) commonly associated with non-occupational indoor air quality issues. A series of experiments was conducted to evaluate five parameters (relative humidity (RH), hydraulic diameter (HD), feeding type (FT) for VOCs, photocatalytic oxidation (PCO) reactor material (RM), and inlet port size (IPS) of PCO reactor) in relation to the PCO destruction efficiencies of the selected target VOCs. None of the target VOCs exhibited any significant dependence on the RH, which is inconsistent with a previous study where, under conditions of low humidity and a ppm toluene inlet level, a drop in the PCO efficiency was reported with a decreasing humidity. However, the other four parameters (HD, RM, FT, and IPS) were found to be important for better VOC removal efficiencies as regards the application of TiO2 photocatalytic technology for cleansing non-occupational indoor air. The PCO destruction of VOCs at concentrations associated with non-occupational indoor air quality issues was up to nearly 100%, and the CO generated during PCO was a negligible addition to indoor CO levels. Accordingly, a PCO reactor would appear to be an important tool in the effort to improve non-occupational indoor air quality.     

Utilization of coal fly ash as a slow-release granular medium for soil improvement

This work proposes a new potential application of waste coal fly ash as a K fertilizer support. Fly ash was reacted with KOH to facilitate the impregnation of K as well as to enhance the bonding force. In particular, the applied process resulted in a significant slow-releasing characteristic of fertilizer elements. To examine the effect of K impregnation, a few detailed leaching tests were carried out in terms of process variables such as reaction time and temperature, sintering time and temperature, and KOH concentration. The current experiment presented an optimum preparation condition that is competitive with conventional commercial fertilizers. The manufactured ash fertilizers inhibited release of the K elements. It was also found through the continuous leaching test with pure water that the ash fertilizer had excellent moisture absorbability. However, the effects of some trace elements in fly ash on soil health and crop productivity as well as environmental considerations need to be established with long-term studies.     

A fair comparison between the spatial scan and the Besag–Newell Disease clustering tests

Routine surveillance of a large geographic region for clusters of adverse health events, particularly cancers, often involves small area health data, possibly controlling for exposure information. Many different methods have been proposed to test for the presence of geographical clusters. Two of the most popular methods are the spatial scan method proposed by Kulldorff and that using a fixed number of cases within scanning circles proposed by Besag and Newell. Although the second test is very popular, it has some difficulties. While the scan test controls for the multiple testing problem, the Besag and Newell test does not. Additionally, the latter method requires the setting of several tuning parameters whose values affect the test performance and are subjectively chosen by the user. This creates a difficulty to make a fair comparison between the two methods and it explains why there have been few formal studies evaluating their relative performances. In this paper, we modify the Besag and Newell test allowing for the control of the error type I probability and compare its power with respect to that of the spatial scan test. We used data sets from a publicly available simulated benchmark. We found that the two methods have similar results, except for clusters located in sparsely populated regions, where the spatial scan method presented a better performance.     

Genetic sub-structure and intermediate optimal outcrossing distance in the marine angiosperm <Emphasis Type="Italic">Zostera marina</Emphasis>

The spatial distribution of genetic variability depends on the spatial patterns of clonal and sexual reproduction, gene flow, genetic drift and natural selection. Species with restricted dispersal may exhibit genetic structuring within populations with immediate neighbours being close relatives, and may show differentiation among populations. Genetic structuring of a species may have important genetic, evolutionary and ecological consequences including distance-dependent mating success. In this study we used microsatellite markers to show that clones of Zostera marina in a population in the Ria Formosa, Portugal, were aggregated and covered distances of up to 3–4 m. Clones within 4 m of each other exhibited significant and positive coancestry values, reflecting the limited seed dispersal of this species. Hand-pollinations between near (0–10.9 m), intermediate (11–32 m) and far (15 km) individuals resulted in similar levels of seed set, although the near pollinations had higher, although not statistically significant, levels of seed abortion during maturation. Seeds from intermediate-distance pollinations had a significantly higher proportion of seeds germinate and shorter germination time than both the near and far seeds. Similarly, the average number of seedlings produced per pollination, used as an overall estimate of fitness, was significantly greater for the intermediate distance when compared to both near and far pollinations. These results suggest that the genetic structuring observed may result in both inbreeding and outbreeding depression, which gives rise to an intermediate optimal outcrossing distance.     

Road traffic injury in sub-Saharan African countries: A systematic review and summary of observational studies

Objective: The aim of this study is to evaluate, through a systematic review of hospital-based studies, the proportion of road traffic injuries and fatalities in sub-Saharan Africa (SSA).

Methods: In accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) and Meta-analysis of Observational Studies in Epidemiology guidelines, we searched the following electronic databases: PubMed, Embase, Africa-Wide Information, Global Health, and Web of Science. Articles were eligible if they measured proportion of road traffic injuries (RTIs) in SSA by using hospital-based studies. In addition, a reference and citation analysis was conducted as well as a data quality assessment.

Results: Up to 2015, there were a total of 83 hospital-based epidemiologic studies, including 310,660 trauma patients and 99,751 RTI cases, in 13 SSA countries. The median proportion of RTIs among trauma patients was 32% (4 to 91%), of which the median proportion of death for the included articles was 5% (0.3 to 41%).

Conclusion: The number of studies evaluating RTI proportions and fatalities in SSA countries is increasing but without the exponential rise expected from World Health Organization calls for research during the Decade of Action for Road Traffic Injuries. Further research infrastructure including standardization of taxonomy, definitions, and data reporting measures, as well as funding, would allow for improved cross-country comparisons.     

Fatal and serious collisions involving pedal cyclists and trucks in London between 2007 and 2011

Objective: Increased numbers of people riding pedal cycles have led to a greater focus on pedal cycle safety. The aim of this article is to explore factors that are associated with fatal and a small number of serious-injury pedal cyclist crashes involving trucks that occurred in London between 2007 and 2011.

Methods: Data were collected from police collision files for 53 crashes, 27 of which involved a truck (≥3.5 tonnes) and a pedal cycle. A systematic case review approach was used to identify the infrastructure, vehicle road user, and management factors that contributed to these crashes and injuries and how these factors interacted.

Results: Trucks turning left conflicting with pedal cyclists traveling straight ahead was a common crash scenario. Key contributory factors identified included the pedal cyclists not being visible to the truck drivers, road narrowing, and inappropriate positioning of pedal cyclists.

Conclusions: Crashes involving trucks and pedal cyclists are complex events that are caused by multiple interacting factors; therefore, multiple measures are required to prevent them from occurring.     

Biology,population dynamics and secondary production of<Emphasis Type="Italic"> Tylos europaeus</Emphasis> (Isopoda,Tylidae) on the western coast of Portugal

The biology, population dynamics, and production of Tylos europaeus were studied in two sandy beaches of the western coast of Portugal. At both sites, reproduction occurred seasonally, from April to July, with only one new cohort produced per year. Regarding population dynamics, cohort-splitting events were detected in males at the beginning of the reproduction period (April/May), resulting in two groups with distinct growth rates (fast-growing vs slow-growing males). Different biological characteristics were consequently detected in these two groups, namely regarding body size, lifespan, and contribution to the reproductive effort. Lifespan was estimated as approximately 3 years, for females and fast-growing males, and 4 years for slow-growing males. Cohort-splitting among males appeared as a possible strategy to cope with the highly male-biased sex ratios observed, which could lead to a strong male-male competition for mating. T. europaeus appeared as an annual species, with a univoltine life-cycle (one generation per year), and iteroparous females reproducing twice during their lifespan. Average growth production (P) was estimated at 0.082 g.m^–2.yr^–1 AFDW (ash-free dry weight) and the average annual biomass () (standing stock) at 0.052 g.m^–2, resulting in a P/ ratio of 1.58. These results produced baseline information for the construction of a population-dynamics model and highlighted the potential of this species as an environmental quality-assessment bioindicator on sandy shores.Communicated by S.A. Poulet, Roscoff     

Coral polyp budding is probably promoted by a canalized ratio of two morphometric fields

Phenotypic plasticity is the ability of an organism to alter its developmental modes in response to changes in the environment. A major challenge, however, is to explore the existence of a stabilized "morphometric code", a morphological set of buffering rules used repeatedly by members of any species, regardless of environmental factors. Budding of polyps in reef-building corals, an accretive process of the asexual growth form, is thought to be a plastic developmental characteristic. However, we found that intra-tentacular polyp budding in the coral genus Favia from the Red Sea (6 colonies, 37 polyps during a period of 3 years) is not correlated with polyp size. It is initiated after reaching an allometric threshold ratio of two stereotypic, radially symmetrical morphometric landmarks, consisting of the surface area of the polyp and its perimeter.     

Biological traits of three closely related species of <Emphasis Type="Italic">Pycnoclavella</Emphasis> (Ascidiacea) in the Western Mediterranean

The reproductive cycles and abundance of the sympatric colonial ascidians Pycnoclavella brava, Pycnoclavella aurilucens and Pycnoclavella communis from two Northwestern Mediterranean sites over a period of 2.5 years are reported. The species showed some differences in their biological patterns. Gonad maturation and larval brooding took place during autumn and early winter for P. communis, during spring for P. aurilucens and during late winter and spring for P. brava. Summer was found to be the unfavorable season for all species, and an aestivation period occurred in P. communis and P. brava. Maximum abundance for the three species was observed during winter. Growth rates of the most abundant species, P. communis, were also monitored and found to peak during the initial phases of reactivation after aestivation. Growth rates decreased afterwards, becoming negative as water temperature started to increase after the winter minima. Reproductive activity and growth rates for P. communis displayed a temporal lag that suggested partitioning of resources to either reproduction or growth in this species.