Population characteristics of young African women influencing prenatal exposure to DDT (Manhiça, Mozambique)

The concentrations of dichlorodiphenyltrichloroethane (DDT) compounds in cord blood of 214 children born between 2003 and 2006 in Manhiça (Mozambique) have been determined. In this time interval, corresponding to the period before DDT reintroduction for indoor residual spraying, the observed values averaged 0.8 and 0.4 ng/ml for 4,4′-dichlorodiphenyldichloroethylene (4,4′-DDE) and 4,4′-DDT, respectively, and were similar to those found in western countries. However, the 4,4′-DDT/4,4′-DDE ratio was high indicating that the inputs of these compounds arriving to children in utero originated from recent uses of the insecticide. The strongest factor affecting DDT concentration was parity. A well-defined decreasing concentration trend was observed for the cord blood concentrations in the period of study. The trend was also observed for multiparae and primiparae mothers independently. Children from multiparae women showed much lower concentrations than primiparae women. Children from mothers with secondary school level exhibited lower concentrations of these pesticides than mothers with lower degree of education.     

Assessment of boscalid and pyraclostrobin disappearance and behavior following application of effective microorganisms on apples

ABSTRACT

The aim of this study is to assess the disappearance of boscalid (IUPAC name: 2-chloro-N-[2-(4-chlorophenyl)phenyl]pyridine-3-carboxamide) and pyraclostrobin (IUPAC name: methyl N-[2-[[1-(4-chlorophenyl)pyrazol-3-yl]oxymethyl]phenyl]-N-methoxycarbamate) residues in apple fruit, and to verify whether an organic fertilizer enriched with strains of antagonistic microorganisms can reduce pesticide residue levels. Field trials were conducted in a commercial orchard on apples of the Gloster variety, during 21 days after the treatment with Bellis 38 WG and the subsequent application of Zumba Plant formulation containing Bacillus spp., Trichoderma spp. and Glomus spp. In control samples, the decrease rate of boscalid and pyraclostrobin residue levels followed an exponential function, described by formulae R_t = 0.2824e^?0.071t and R_t = 0.1176e^?0.060t, with the coefficient of determination of r² = 0.8692 and r² = 0.9268, respectively. These levels dropped to half (t_1/2) of their initial values after 9.8 and 11.5 days, respectively. The treatment with Zumba Plant resulted in a reduction in boscalid and pyraclostrobin residue levels by 52% and 41%, respectively. The results of this study are of importance for horticulture sciences and for producers of apples using plant protection products (PPPs).     

Diagnostic Study of Critical Circuits of the Kraft Pulp Production Process Considering the Environmental Aspects

Abstract

This paper describes systematic work undertaken in the field of atmospheric emissions from Portuguese Kraft pulp mills. The study led to the determination of emission factors from stationary sources, which proved to be an important tool for assessing the need for investment in air pollution abatement equipment, specifically for malodorous gases.     

A spatial multicriteria model for determining air pollution at sample locations

Atmospheric pollution in urban centers has been one of the main causes of human illness related to the respiratory and circulatory system. Efficient monitoring of air quality is a source of information for environmental management and public health. This study investigates the spatial patterns of atmospheric pollution using a spatial multicriteria model that helps target locations for air pollution monitoring sites. The main objective was to identify high-priority areas for measuring human exposures to air pollutants as they relate to emission sources. The method proved to be viable and flexible in its application to various areas.

Implications:?Spatial multicriteria models provide a tool for air pollution management in urban areas. Analytic hierarchy process (AHP) modeling can help with the process of prioritizing monitoring site locations and minimizing costs.     

Coupling of titania with multiwall carbon nanotubes for decomposition of gas-phase pollutants under simulated indoor conditions

This study synthesized multiwall carbon nanotube (MWNT)–titania (TiO₂) composites and examined their characteristics and photocatalytic performance for the cleaning of gas-phase benzene, toluene, ethyl benzene, and o-xylene (BTEX) under simulated indoor conditions. Optical and spectral surveys of the as-synthesized composite confirmed that the TiO₂ nanoparticles were bound intimately to the MWNT networks. The photocatalytic performance was evaluated using an annular-type reactor inner-coated with MWNT–TiO₂ or Degussa P25 TiO₂. The composite revealed gas removal ability superior to that of stand-alone TiO₂. This composite was also less affected by humidity during toluene decomposition compared to the previous result obtained from a stand-alone TiO₂. Unlike another previous result obtained from the TiO₂, the performance of the composite was not affected by changes in input concentration (IC) within a simulated indoor air quality range (0.1–1.0 ppm) but it decreased significantly when the IC was increased to 5 and 10 ppm. As the flow rate was decreased from 4.0 to 1.0 L min^?1, the average efficiency for the target compounds increased to 95% or ～100%. The MWNT–TiO₂ composite could be applied effectively to the decomposition for BTEX under certain simulated indoor conditions.

Implications: Unlike water applications, there are few reports of gas-phase applications of multiwall carbon nanotubes (MWCNT)–TiO₂ composites. This study found that MWCNT–TiO₂ composites showed performance in the removal of toxic gaseous aromatic superior to that of stand-alone TiO₂. In addition, the pollutant degradation efficiency of the composite was less affected by humidity than for a stand-alone TiO₂ unit within a simulated indoor relative humidity range. Moreover, unlike the TiO₂ unit, the composite's performance was not affected by variations in the input concentrations within the simulated indoor air quality (IAQ) range. In addition, the decomposition efficiencies increased to 100% with decreasing flow rate.     

Clay charge reversal effects on aqueous polymer sorption on lateritic soils

The effects of charge reversal about the measured point of zero charge (pH(0) approximately 5.2) of untreated and treated Sete Lagoas lateritic soil of Brazil on aqueous polymer sorption was investigated. The polymers are anionic sodium carboxymethyl cellulose (CMCA), nonionic polyethylene oxide (PEO), and cationic polyacrylamide (PAM). They were prepared at aqueous concentrations and pH ranges of 0.1-2.0 g l(-1) and 2-9, respectively. Soil treatment involved the removal of iron oxides by treatment with dithionate-bicarbonate-citrate. Batch sorption test results show that the presence of iron oxides in lateritic soil tends to suppress sorption of CMCA (especially at pH=pH(0)) and PEO (for the whole pH range) but has uncertain effects on cationic PAM sorption. CMCA sorption on the untreated soil improves on either side of pH(0), in direct proportionality to solution concentration, except at pH<4.0, where disassociation of the polymer molecules may decrease sorption energy. Increase in the sorption of non-cationic polymers (CMCA and PEO) at pH>pH(0) is attributable to dispersion of clay, cation bridging and polymer molecular reconfiguration. For cationic PAM, electrostatic bonding to negatively charged soil particle surfaces accounts for the sorption increase. For treated soil samples, polymer sorption pattern is similar to those expected for the montmorillonitic clayey soils of temperate zones. These results indicate that the pH(0) of lateritic soils, within the regime that exists in the field, should be considered in assessing the potential effectiveness of polymer dust suppressants for tropical lateritic soils.     

Ozonation of aniline promoted by activated carbon

The removal of aniline from aqueous solutions by simultaneous use of ozone and activated carbon was investigated at different solution pH. For comparative purposes, single ozonation and adsorption on activated carbon were carried out in the same experimental set-up. In order to evaluate the role of the activated carbon surface chemistry during ozonation, a commercial activated carbon, Norit GAC 1240 PLUS, was submitted to oxidation in the liquid phase with HNO(3). The texture and surface chemistry of the activated carbon samples were characterized. During ozonation, complete conversion of aniline was achieved after approximately 20 min, regardless of the presence of activated carbon. In all cases, several by-products were formed during ozonation. Nitrobenzene, o- and p-aminophenol were the primary aromatic oxidation by-products identified. In terms of TOC removal, best results were achieved by the simultaneous use of ozone and activated carbon. Though there is a strong contribution of adsorption, a considerable synergetic effect between ozone and activated carbon is observed. In general, activated carbon promotes the reaction of ozonation enhancing the efficiency of this treatment process. The basic activated carbon presented greater activity in this process leading to higher mineralization rates.     

Water deficit stress induces different monoterpene and sesquiterpene emission changes in Mediterranean species. Relationship between terpene emissions and plant water potential

The effects of water deficit stress and plant water potential (psi) on monoterpene and sesquiterpene leaf emissions from Rosmarinus officinalis, Pinus halepensis, Cistus albidus and Quercus coccifera were studied over 11 days of water withholding (from t(1) to t(11)), after substrates had achieved their field capacity (control pots: t(0)). Volatile compounds were sampled from the same twig per plant all throughout the study, using a dynamic bag enclosure system. Volatiles, collected in Tenax TA, were studied by means of GC-FID and GC-MS. Monoterpene emissions of water stressed plants (t(1)-t(11)) were either similar to those of control seedlings (R. officinalis and Q. coccifera) or higher (P. halepensis and C. albidus). By contrast, sesquiterpene emissions were strongly reduced or inhibited after four days of water withholding, particularly for R. officinalis, thus altering terpene emission composition. Despite the positive effect of water stress on leaf monoterpene emissions of P. halepensis and C. albidus, the significant correlation between these emissions and psi showed a slow decrease of these emissions over long term water deficit periods. This contrasted with the rapid decline of sesquiterpene emissions of R. officinalis according to lower values of psi. These results provide an overall picture of the different responses of monoterpene and sesquiterpene emissions to progressive water loss. They also reveal the utility of using psi for estimating some emission rates of some species according to drought conditions.     

Seasonal variation of monomethylmercury concentrations in surface sediments of the Tagus Estuary (Portugal)

Surface sediments (0-2cm) were collected at 40 sites along the Tagus Estuary in July and December 2004. The sediments were analysed for total mercury, monomethylmercury (MMHg) and interpretative parameters (e.g. redox potential, pH, C(org)). No significant differences in total Hg, pH, Al, Fe, Mn and C(org) were found between sediments collected in the two periods, but MMHg concentrations were higher in July. On average sediments were warmer and more reducing in summer. On the basis of these results, an increase of 7kg of MMHg (+37%) in surface sediments of the Tagus Estuary was estimated. Presumably higher temperatures in summer promote the increase of microbial activity and higher methylation rates. The alterations observed in this study point to the potential importance of seasonal changes in MMHg production at surface sediments with eventual changes in the MMHg uptake by benthic invertebrates and other organisms in the food web.