Bulk atmospheric deposition of persistent toxic substances (PTS) along environmental gradients in Brazil

Bulk atmospheric deposition measurements for selected persistent toxic substances (PTS) were performed along environment gradients (urban–suburban–rural–background sites) in Brazil. The aim with this work is to investigate the fate of PTS and their emissions in South America, particularly along environment transects. Bulk sampler systems (polyurethane foams, 1?×?1 m²) were fixed along environment gradients (urban–suburban–rural–background) over summer and winter periods (2005–2007) at sites of different climate zones of Brazil. Organochlorine pesticides (OCs) and polychlorinated biphenyls (PCBs) were analyzed by gas chromatography coupled to electron capture detector (Shimadzu 2010, 20i GC-ECD). Urban sites reported the highest deposition rates for all PTS, ranging from tens to thousands of pictograms per square meter per day. Basically, there were no obvious seasonal differences in deposition rate concentrations for PTS along the urban–suburban–rural–background gradient. Dichlorodiphenyltrichloroethane (DDT) and its metabolites were the OCs most frequently detected at relatively high deposition rate levels (>1,000 pg m^?2 day^?1). Other legacy and current-use pesticides such as hexachlorocyclohexanes, endosulfans, hexachlorcyclobenzine, dieldrin, aldrin, metoxichlor, and chlodanes were also detected at lower deposition rate levels (10–100 pg m^?2 day^?1). PCBs were detected at extremely high deposition rate levels (1,000–10,000 pg m^?2 day^?1) with highest contributions from the tetra-PCBs (PCB-52, PCB-44, PCB-66, PCB-81, and PCB-77) and penta-PCB congeners (PCB-101, PCB-105, PCB-114, PCB-118, and PCB-126). The greatest deposition rate concentrations for total PCBs were mainly detected at urban sites in connection with high population densities. The observed high deposition rate concentrations for PCBs and DDTs at urban sites are probably associated with old PTS stocks emissions. For PCBs in particular, the high levels are strongly associated with local population densities, highlighting the effect of local/regional urban sources on these target PTS. These results are important to show that even though the use of PTS is regulated, the deposition of selected PTS is still impacted by local and regional emissions in Brazil and may be related to the historical and continued emissions from old PTS stocks.     

The estimation of consumer health risk associated with organochlorine xenobiotics in hard smoked cheese in Poland

The aim of this study was to estimate the health risks associated with consumption of smoked cheeses, which are popular in Poland. The analysis covered polychlorinated biphenyl (PCB) indicator congeners (ndl-PCBs: PCB 28, PCB 52, PCB 101, PCB 138, PCB 153, PCB 180), dioxin-like PCBs (dl-PCBs): non-ortho (PCB 77, PCB 81, PCB 126, PCB 169) and mono-ortho (PCB 105, PCB 114, PCB 118, PCB 156, PCB 157), as well as organochlorine pesticides (OCPs: αHCH, βHCH, γHCH, heptachlor, aldrin, heptachlor epoxid isomer B, dieldrin, pp'DDE op′DDD, pp′DDT, pp′DDD, op′DDT, endrin). The pesticide residues detected in the examined cheese were below the maximum residues levels. The estimated daily intake [lifetime average daily dose (LADD)] referring to the sum of the compounds varied within 4.21·10^?7–3.92·10^?6 mg·kg^?1·day^?1 and was significantly lower than the tolerable daily intake/acceptable daily intake (TDI/ADI) for individual compounds. The health hazard quotient, being the exact measure of the magnitude of exposure potential or a quantifiable potential for developing non-carcinogenic health effects after an averaged exposure period, was also very low, ranging from 2.87·10^?6 to 5.32·10^?5. The obtained results confirmed that the intake of rennet cheese does not pose any consumer health risk in Poland.     

Exposure to chemical mixtures in Mexican children: high-risk scenarios

In developing countries, the management of environmental toxicants is inadequate, thus, humans may be exposed to levels higher than normal levels (background levels). Therefore, the aim of this study was to evaluate the exposure level of Mexican children to dichlorodiphenyltrichloroethane (DDT), dichlorodiphenyldichloroethylene (DDE), lead, and polycyclic aromatic hydrocarbons [using 1-hydroxypyrene (1-OHP) as exposure biomarker] and to assess the percentage of children exposed to these four compounds at concentrations higher than normal in each community studied. We performed random sampling in eight communities in Mexico (five communities in Chiapas State and three communities in San Luis Potosi State). DDT and DDE were analyzed by gas chromatography/mass spectrometry, the quantification of lead in blood was performed using atomic absorption spectrophotometry, and 1-OHP analyses were performed using HPLC with a fluorescence detector. Elevated DDT, DDE, and 1-OHP levels were found in children living in the indigenous communities of Chiapas State, while higher blood lead levels were found in two communities in San Luis Potosí. Approximately 30 % of children living in Chiapas were exposed to all four compounds at concentrations above the guidelines for each compound, whereas 48 % of children studied were exposed to all four contaminants at concentrations higher than normal in a community in San Luis Potosí State. As expected, our results showed that in hot spots, children are exposed to levels higher than normal. Therefore, child environmental health programs are urgently needed.     

Assessment of the Effects of Sugar Cane Plantation Burning on Daily Counts of Inhalation Therapy

ABSTRACT

This study was designed to evaluate the association between sugar cane plantation burning and hospital visits in Araraquara in the state of São Paulo, Brazil. From June 1 to August 31, 1995, the daily number of visits of patients who needed inhalation therapy in one of the main hospitals of the city was recorded and used as health impairment estimation. Sedimentation of particle mass (the amount of particles deposited on four containers filled with water) was measured daily. The association between the weight of the sediment and the number of visits was evaluated by means of Poisson regression models controlled for seasonality, temperature, day of the week, and rain. We found a significant and dose-dependent relationship between the number of visits and the amount of sediment. The relative risk of visit associated with an increase of 10 mg in the sediment weight was 1.09 (1-1.19), and the relative risk of an inhalation therapy was 1.20 (1.03-1.39) on the most polluted days (fourth quartile of sediment mass). These results indicate that sugar cane burning may cause deleterious health effects in the exposed population.     

Influence of pleat geometry on filter cleaning in PTFE/glass composite filter

A pleated filter bag is often used to treat exhaust gas in many industrial applications, due to its fairly high dust collection efficiency and relatively low pressure drop. This work deals with the optimum pleating geometries of a pleated filter made with a newly developed PTFE/glass composite filter. It was found that pleating geometries, including pleat height and pleat pitch, directly affect the cleaning efficiency. The design index, α, which stands for the ratio of pleat height to pleat pitch, is 1.48 for optimum operation. When the α value was higher than 1.48, the pressure drop across the pleated filter medium increased, resulting in a decreased cleaning interval due to the difficulty of filter cleaning. Therefore, it is necessary that the optimum pleating geometry should be determined by employing the dimensionless parameter, α, in the design of cartridge filters.

Implications: A pleated filter bag is often used to treat exhaust gas in many industrial applications due to its fairly high dust collection efficiency and relatively low pressure drop. The present paper introduces an optimum design configuration to make a pleated filter with newly developed PTFE/glass composite filter media. A dimensionless parameter that is the ratio of pleat height to pleat pitch should be considered to make the best quality pleated filter.     

Survival and behavior of the insecticide-exposed predators Podisus nigrispinus and Supputius cincticeps (Heteroptera: Pentatomidae)

Pentatomid stinkbugs are important predators of defoliating caterpillars in agricultural and forestry systems, and knowledge of the impact of insecticides on natural enemies is important information for integrated pest management (IPM) programs. Thus, we assessed the toxicity and behavioral sublethal response of the predators Podisus nigrispinus and Supputius cincticeps exposed to deltamethrin, methamidophos, spinosad and chlorantraniliprole, insecticides commonly used to control the velvetbean caterpillar (Anticarsia gemmatalis) in soybean crops. With the exception of deltamethrin for S. cincticeps, all insecticides showed higher acute toxicity to the prey than to these natural enemies providing effective control of A. gemmatalis. The recommended field concentration of deltamethrin, methamidophos and spinosad for controlling A. gemmatalis caused 100% mortality of P. nigrispinus and S. cincticeps nymphs. Chlorantraniliprole was the less toxic and the most selective insecticide to these predators resulting in mortalities of less than 10% when exposed to 10× the recommended field concentration for a period of 72 h. Behavioral pattern changes in predators were found for all insecticides, especially methamidophos and spinosad, which exhibited irritability (i.e., avoidance after contact) to both predator species. However, insecticide repellence (i.e., avoidance without contact) was not observed in any of the insects tested. The lethal and sublethal effects of pesticides on natural enemies is of great importance for IPM, and our results indicate that substitution of pyrethroid and organophosphate insecticides at their field rates by chlorantraniliprole may be a key factor for the success of IPM programs of A. gemmatalis in soybeans.     

Fast extraction of polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran in sewage sludge and soil samples

The current environmental legislations recommend monitoring chemical contaminants such as polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans before the use of sewage sludge on the agricultural land. In this study, a solid–liquid extraction with low-temperature purification (SLE-LTP) was optimized and validated to determine 2,3,7,8-tetrachlorodibenzo-p-dioxin and 2,3,7,8-tetrachlorodibenzofuran in sewage sludge and soil samples. The analyses were performed by gas chromatography-mass spectrometry operating in the selective ion mode (GC-MS-SIM). Acetonitrile:ethyl acetate 6.5:1.5 (v/v) was the best extraction phase, and the recoveries percentages were close to 100%. The linearity was demonstrated in the range of 1.25–25 µg L^?1 of 1.25–20 µg L^?1 for sewage sludge and soil, respectively. Matrix effect was proved for the two compounds and in the two matrices studied. Extraction percentages were between 78 and 109% and relative standard deviations ≤ 19%. The proposed method is faster than methods described in the literature because showed a few steps. The quantification limits (LOQ) in sewage sludge were 6.4 and 32 ng TEQ kg^?1 for 2,3,7,8-TCDF and 2,3,7,8-TCDD, respectively. In soil, LOQs were 0.8 and 8.0 ng TEQ kg^?1 for 2,3,7,8-TCDF and 2,3,7,8-TCDD, respectively. These values are lower than the maximum residue limits established by European Legislation. The method was applied to 22 agricultural soil samples from different Brazilian cities and 2,3,7,8-TCDF was detected in one of these samples.     

Effect of processing on the disappearance of pesticide residues in fresh-cut lettuce: Bioavailability and dietary risk

The aim of this research is to establish the processing factors of six pesticides durong the preparation of fresh-cut lettuce and to assess the risk of ingestion of pesticide residues associated with the consumption of the same. A field study was carried out on the dissipation of three insecticides (imidacloprid, tebufenozide, cypermethrin) and three fungicides (metalaxyl, tebuconazole, azoxystrobin) during treatment conditions simulating those used for commercial fresh-cut lettuce. A simultaneous residue analysis method is validated using QuEChERS extraction with acetonitrile and CG-MS and LC-MS/MS analysis. The residues detected after field application never exceed the established Maximum Residue Limits. The processing factors were generally less than 1 (between 0.34 for tebufenozide and 0.53 for imidacloprid), indicating that the process, as a whole, considerably reduces residue levels in processed lettuce compared to fresh lettuce. It is confirmed that cutting, followed by washing and drying, considerably reduces the residues. A matrix effect in the dialyzation of the pesticides is observed and the in vitro study of bioavailability establishes a low percentage of stomach absorption capacity (<15%). The EDI/ADI ratios found in all cases were well below their ADI values, and the dietary exposure assessed (EDI) in fresh-cut lettuce showed no concerns for consumer health.     

Cultivation of freshwater microalgae in biodiesel wash water

Biodiesel wash water is a contaminating industrial effluent that must be treated prior to disposal. The use of this effluent as a low-cost alternative cultivation medium for microalgae could represent a viable supplementary treatment. We cultivated 11 microalgae species with potential use for biodiesel production to assess their growth capacities in biodiesel industrial washing waters. Only Monoraphidium contortum, Ankistrodesmus sp., Chlorococcum sp., and one unidentified Chlorophyceae species grew effectively in that effluent. M. contortum showed the highest growth capacity and had the second highest fatty acid content (267.9 mg g⁻¹ of DW), predominantly producing palmitic (20.9%), 7,10,13-hexadecatrienoic (14%), oleic (16.2%), linoleic (10.5%), and linolenic acids (23.2%). In the second phase of the experiment, the microalgae were cultivated in biodiesel wash water at 75% of its initial concentration as well as in WC (control) medium. After 21 days of cultivation, 25.8 and 7.2% of the effluent nitrate and phosphate were removed, respectively, and the chemical oxygen demand was diminished by 31.2%. These results suggest the possibility of cultivating biodiesel producing microalgae in industrial wash water effluents.

     

I-C-SEA Change: A participatory tool for rapid assessment of vulnerability of tropical coastal communities to climate change impacts

We present a synoptic, participatory vulnerability assessment tool to help identify the likely impacts of climate change and human activity in coastal areas and begin discussions among stakeholders on the coping and adaptation measures necessary to minimize these impacts. Vulnerability assessment tools are most needed in the tropical Indo-Pacific, where burgeoning populations and inequitable economic growth place even greater burdens on natural resources and support ecosystems. The Integrated Coastal Sensitivity, Exposure, and Adaptive Capacity for Climate Change (I-C-SEA Change) tool is built around a series of scoring rubrics to guide non-specialists in assigning scores to the sensitivity and adaptive capacity components of vulnerability, particularly for coral reef, seagrass, and mangrove habitats, along with fisheries and coastal integrity. These scores are then weighed against threat or exposure to climate-related impacts such as marine flooding and erosion. The tool provides opportunities for learning by engaging more stakeholders in participatory planning and group decision-making. It also allows for information to be collated and processed during a “town-hall” meeting, facilitating further discussion, data validation, and even interactive scenario building.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-015-0652-x) contains supplementary material, which is available to authorized users.