<Emphasis Type="Italic">Mesorhizobium</Emphasis> bacterial strains isolated from the legume <Emphasis Type="Italic">Lotus corniculatus</Emphasis> are an alternative source for the production of polyhydroxyalkanoates (PHAs) to obtain bioplastics

Polyhydroxyalkanoic acids (PHAs) are natural polyesters that can be used to produce bioplastics which are biodegradable. Numerous microorganisms accumulate PHAs as energy reserves. Combinations of different PHAs monomers lead to the production of bioplastics with very different properties. In the present work, we show the capability of strains belonging to various phylogenetic lineages within the genus Mesorhizobium, isolated from Lotus corniculatus nodules, to produce different PHA monomers. Among our strains, we found the production of 3-hydroxybutyrate, 3-hydroxyvalerate, 3-hydroxydodecanoate, and 3-hydroxyhexadecanoate. Most of the PHA-positive strains were phylogenetically related to the species M. jarvisii. However, our findings suggest that the ability to produce different monomers forming PHAs is strain-dependent.     

Utilization of long duration high-volume sampling coupled to SPME-GC-MS/MS for the assessment of airborne pesticides variability in an urban area (Strasbourg,France) during agricultural application

Atmospheric samples have been collected between 14 March and 12 September 2012 on a 2-week basis (15 days of sampling and exchange of traps each 7 days) in Strasbourg (east of France) for the analysis of 43 pesticides. Samples (particle and gas phases) were separately extracted using Accelerated Solvent Extraction (ASE) and pre-concentrated by Solid Phase Micro-Extraction (SPME) before analysis by gas chromatography coupled to tandem mass spectrometry (GC-MS/MS). Four SPME consecutive injections at distinct temperatures were made in order to increase the sensitivity of detection for the all monitored pesticides. Currently used detected pesticides can be grouped in four classes; those used in maize crops (acetochlor, benoxacor, dicamba, s-metolachlor, pendimethalin, and bromoxynil), in cereal crops (benoxacor, chlorothalonil, fenpropimorph, and propiconazole), in vineyards (tebuconazole), and as herbicides for orchards, meadows of green spaces (2,4-MCPA, trichlopyr). This is in accordance with the diversity of crops found in the Alsace region and trends observed are in accordance with the period of application of these pesticides. Variations observed permit also to demonstrate that the long time sampling duration used in this study is efficient to visualize temporal variations of airborne pesticides concentrations. Then, long time high-volume sampling could be a simple method permitting atmospheric survey of atmospheric contamination without any long analysis time and consequently low cost.     

Energy rating methodology for light-duty vehicles: geographical impact

The aim of this paper was to describe a new energy dependency score methodology and its consequent application to cars sold in twelve regions: Europe (EU-28) and eleven specific countries worldwide (Australia, Brazil, China, India, Japan, Norway, Portugal, Russia, Saudi Arabia, South Africa and USA). This methodology was developed as a potential tool to inform consumers of their choice impact on the country’s economy. This methodology is based on primary energy assessments and origins for each energy pathway associated with a gasoline-, diesel-, natural gas (used for H₂ production)- or electricity (balanced with country electricity mix)-powered vehicle. An energy dependency index was attributed to the best-case (100 % endogenous production) and worst-case (0 % endogenous production) scenarios and consequently weighted with vehicle fuel consumption. This enabled obtaining an energy dependency index (10–0). This index could be assigned to an environmental and social index to provide a sustainability index and therefore complement a road vehicle environmental rating system, providing a combined index rating. Internal combustion engine vehicles and hybrid vehicles (that have oil products as energy source) rate the lowest for almost all locations, with the exception of regions that are energy independent (Norway, Saudi Arabia or Russia). Electric vehicles rank higher when comparing to the other technologies analyzed for all locations in this study. The plug-in hybrid electric vehicle shows generally a rank in an intermediate place, except for Japan where it scores lower than all other technologies.     

Indoor pollutant exposure among children with and without asthma in Porto,Portugal, during the cold season

Environmental Science and Pollution Research - Considering the time spent in enclosed spaces, indoor air pollutants are of major interest because of its possible impact on health. However, to date,...     

Decision support tool for soil sampling of heterogeneous pesticide (chlordecone) pollution

When field pollution is heterogeneous due to localized pesticide application, as is the case of chlordecone (CLD), the mean level of pollution is difficult to assess. Our objective was to design a decision support tool to optimize soil sampling. We analyzed the CLD heterogeneity of soil content at 0–30- and 30–60-cm depth. This was done within and between nine plots (0.4 to 1.8 ha) on andosol and ferralsol. We determined that 20 pooled subsamples per plot were a satisfactory compromise with respect to both cost and accuracy. Globally, CLD content was greater for andosols and the upper soil horizon (0–30 cm). Soil organic carbon cannot account for CLD intra-field variability. Cropping systems and tillage practices influence the CLD content and distribution; that is CLD pollution was higher under intensive banana cropping systems and, while upper soil horizon was more polluted than the lower one with shallow tillage (<40 cm), deeper tillage led to a homogenization and a dilution of the pollution in the soil profile. The decision tool we proposed compiles and organizes these results to better assess CLD soil pollution in terms of sampling depth, distance, and unit at field scale. It accounts for sampling objectives, farming practices (cropping system, tillage), type of soil, and topographical characteristics (slope) to design a relevant sampling plan. This decision support tool is also adaptable to other types of heterogeneous agricultural pollution at field level.     

Dynamics and mitigation of six pesticides in a “Wet” forest buffer zone

Pesticide pollution is one of the main current threats on water quality. This paper presents the potential and functioning principles of a “Wet” forest buffer zone for reducing concentrations and loads of glyphosate, isoproturon, metazachlor, azoxystrobin, epoxiconazole, and cyproconazole. A tracer injection experiment was conducted in the field in a forest buffer zone at Bray (France). A fine time-scale sampling enabled to illustrate that interactions between pesticides and forest buffer substrates (soil and organic-rich litter layer), had a retarding effect on molecule transfer. Low concentrations were observed for all pesticides at the forest buffer outlet thus demonstrating the efficiency of “Wet” forest buffer zone for pesticide dissipation. Pesticide masses injected in the forest buffer inlet directly determined concentration peaks observed at the outlet. Rapid and partially reversible adsorption was likely the major process affecting pesticide transfer for short retention times (a few hours to a few days). Remobilization of metazachlor, isoproturon, desmethylisoproturon, and AMPA was observed when non-contaminated water flows passed through the forest buffer. Our data suggest that pesticide sorption properties alone could not explain the complex reaction mechanisms that affected pesticide transfer in the forest buffer. Nevertheless, the thick layer of organic matter litter on the top of the forest soil was a key parameter, which enhanced partially reversible sorption of pesticide, thus retarded their transfer, decreased concentration peaks, and likely increased degradation of the pesticides. Consequently, to limit pesticide pollution transported by surface water, the use of already existing forest areas as buffer zones should be equally considered as the most commonly implemented grass buffer strips.     

A step forward using QuEChERS (Quick,Easy, Cheap,Effective, Rugged,and Safe) based extraction and gas chromatography-tandem mass spectrometry—levels of priority polycyclic aromatic hydrocarbons in wild and commercial mussels

A new and fully validated QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) extraction and gas chromatography–tandem mass spectrometry methodology was developed and subsequently implemented for the quantification of 16 polycyclic aromatic hydrocarbons (PAHs) in wild (from Matosinhos Beach, Portugal) and commercial (from Ria de Arousa, Spain) mussels. The method proved to be robust, precise, and accurate, with recoveries ranging from 89.2 to 111.8 %. Total sums of 16 PAHs were 52.91 and 37.58 ng/g of wet weight for wild and commercial specimens, respectively. The three- to four-ring PAHs were the most abundant, and a mixture of petrogenic and pyrolytic sources were suspected to occur in both origin areas. Although the contamination levels were below the European regulated limits, specifically for commercial mussels (this despite wild specimens are also consumed), care should be taken in terms of human health, since we are still not aware of the low-dose versus long-term effects, even more in high-risk population groups.     

Fate and effects of metal-based nanoparticles in two marine invertebrates,the bivalve mollusc Scrobicularia plana and the annelid polychaete Hediste diversicolor

The objective of this paper is to synthesize results from seven published research papers employing different experimental approaches to evaluate the fate of metal-based nanoparticles (Ag NPs, Au NPs, CuO NPs, CdS NPs, ZnO NPs) in the marine environment and their effects on two marine endobenthic species, the bivalve Scrobicularia plana and the ragworm Hediste diversicolor. The experiments were carried out under laboratory (microcosms) conditions or under environmentally realistic conditions in outdoor mesocosms. Based on results from these seven papers, we addressed the following research questions: (1) How did the environment into which nanoparticles were released affect their physicochemical properties?, (2) How did the route of exposure (seawater, food, sediment) influence bioaccumulation and effects?, (3) Which biomarkers were the most responsive? and (4) Which tools were the most efficient to evaluate the fate and effects of NPs in the marine environment? The obtained results showed that metal‐based NPs in general were highly agglomerated/aggregated in seawater. DGT tools could be used to estimate the bioavailability of metals released from NPs under soluble form in the aquatic environment. Both metal forms (nanoparticulate, soluble) were generally bioaccumulated in both species. Among biochemical tools, GST and CAT were the most sensitive revealing the enhancement of anti-oxidant defenses in both species exposed to sub-lethal concentrations of metal-based NPs. Apoptosis and genotoxicity were frequently observed.     

Pseudomorphs of barite and biogenic ZnS after phyto-crystals of calcium oxalate (whewellite) in the peat layer of a poor fen

Pseudomorphs of barite (BaSO₄) and Cd-rich ZnS after whewellite (CaC₂O₄·H₂O) occur within remnants of Scots pine bark tissues in the peat layer of a poor fen located near a zinc smelter in south Poland. A two-step formation of the pseudomorphs is postulated based on SEM observations: (1) complete dissolution of whewellite, possibly caused by oxalotrophic bacteria, and (2) subsequent bacterially induced precipitation of barite and spheroidal aggregates of ZnS together with galena (PbS) in voids left by the dissolved whewellite crystals. Local increase in pH due to microbial degradation of whewellite, elevated concentrations of Zn(II) and Ba(II) in pore water due to the decomposition of atmospheric particles of sphalerite and barite in the acidic (pH 3.5–3.8) environment, oxidation of S species during drying and rewetting of the peat layer, and subsequent partial reduction of sulfate anions by sulfur-reducing bacteria were all factors likely involved in the crystallization of ZnS and barite in the microenvironment of the post-whewellite voids.     

Long-term disruption of growth,reproduction, and behavior after embryonic exposure of zebrafish to PAH-spiked sediment

A natural sediment spiked with three individual polycyclic aromatic hydrocarbons (PAHs; pyrene, phenanthrene and benzo[a]pyrene) was used to expose zebrafish embryos and larvae during 4 days. The total PAH concentration was 4.4 μg g^?1 which is in the range found in sediment from contaminated areas. Quantification of metabolites in the larvae after exposure confirmed the actual contamination of the larvae and indicated an active metabolism especially for pyrene and benzo[a]pyrene. After a transfer in a clean medium, the larvae were reared to adulthood and evaluated for survival, growth, reproduction, and behavior. Measured endpoints revealed a late disruption of growth (appearing at 5 months) and a trend toward a lower reproductive ability. Adults of embryos exposed to sediment spiked with PAHs displayed lethargic and/or anxiety-like behaviors. This latter behavior was also identified in offspring at larval stage. All together, these effects could have detrimental consequences on fish performances and contribution to recruitment.