Cerium-modified iron oxides applied as catalysts in the heterogeneous Fenton system for degradation of cephalexin

Environmental Science and Pollution Research - The effect of incorporation of different amounts of cerium on iron oxides and different heat treatment temperatures was evaluated for the degradation...     

Coating independent cytotoxicity of citrate- and PEG-coated silver nanoparticles on a human hepatoma cell line

The antibacterial potential of silver nanoparticles(AgNPs) resulted in their increasing incorporation into consumer,industrial and biomedical products.Therefore,human and environmental exposure to AgNPs(either as an engineered product or a contaminant)supports the emergent research on the features conferring them different toxicity profiles.In this study,30 ran AgNPs coated with citrate or poly(ethylene glycol)(PEG) were used to assess the influence of coating on the effects produced on a human hepatoma cell line(HepG2),namely in terms of viability,apoptosis,apoptotic related genes,cell cycle and cyclins gene expression.Both types of coated AgNPs decreased cell proliferation and viability with a similar toxicity profile.At the concentrations used(11 and 5 μg/mL corresponding to IC50 and-IC10 levels,respectively) the amount of cells undergoing apoptosis was not significant and the apoptotic related genes BCL2(anti-apoptotic gene)and BAX(pro-apoptotic gene) were both downregulated.Moreover,both AgNPs affected HepG2 cell cycle progression at the higher concentration(11 μg/mL) by increasing the percentage of cells in S(synthesis phase) and G2(Gap 2 phase) phases.Considering the cell-cycle related genes,the expression of cyclin B1 and cyclin E1 genes were decreased.Thus,this work has shown that citrate- and PEG-coated AgNPs impact on HepG2 apoptotic gene expression,cell cycle dynamics and cyclin regulation in a similar way.More research is needed to determine the properties that confer AgNPs at lower toxicity,since their use has proved helpful in several industrial and biomedical contexts.     

A socioeconomic and natural vulnerability index for oil spills in an Amazonian harbor: A case study using GIS and remote sensing

The coastal zone of the Brazilian state of Maranhão is an area characterized by a large variety of human activities and services, in particular in the Itaqui-Bacanga port complex (IBC). The IBC is an area prone to oil spills resulting from the processes of transportation, storage, and tank cleaning. The present study aimed to map the different physical environments adjacent to this complex and the socioeconomic profile of the local population that would be most vulnerable to this type of disaster. Vulnerability studies are essential as one of the first step in the development of an integrated coastal zone management. The variables analyzed in this study included geomorphological units, and the income, education, and dependence on fishing of the local population. The estimate of the vulnerability index was based on the relationships between these variables, which were used to generate a vulnerability map using GIS and the interpretation of high-resolution remote sensing, showing the areas of highest priority for intervention in the case of oil spills. The analysis of the natural and socioeconomic environments indicated that the areas of highest vulnerability correspond to the mangroves and the Vila Nova and Alto da Esperança neighborhoods, respectively. These neighborhoods have a direct relationship with fishing, and low levels of both income and education. By contrast, the lowest vulnerability was attributed to the coastal plateau and the central Anjo da Guarda neighborhood, which is occupied by residents with relatively high income and education, who do not depend on fishing.     

Recycling potential of urban solid waste destined for sanitary landfills: the case of Indaiatuba, SP, Brazil.

The urban solid waste of the city of Indaiatuba (pop. 175 000), located in the state of S?o Paulo, was characterized, focusing on the recycling potential. For this purpose, collected waste was subdivided into 27 items, classified by mass and volume. About 90% of this waste was found to be potentially recyclable and only 10% requiring landfilling. The compostable organic matter, in the form of food and garden waste, both with high moisture content (51 and 41%, respectively), represents 54% in mass and 21% in volume. The most common type of plastic in this waste is high density polyethylene, whose estimated disposal is about 5000kgday(-1). A socio-economic analysis of the waste generation indicates that low-income neighbourhoods discard relatively less packaging and more food waste, shoes and construction debris than middle and high income ones, which may be due to low purchasing power and schooling. Our findings indicate that more aluminium and uncoloured polyethylene terephthalate is discarded in the warmest months of the year, probably due to a greater consumption of canned and bottled drinks.     

Metal availability and uptake by sorghum plants grown in soils amended with sludge from different treatments

Several factors depending on the sludge, the soil, or the combination of both substrates, may affect element availability to plants. In this study, an assessment was done of the effect of two sludges obtained by different processes (activated sludge and facultative stabilization pond) on heavy-metal availability and uptake by sorghum plants in soils with high and low copper contents. Results obtained for DTPA-extractable metal indicated higher metal availability in sludge-amended soils. In addition, sludges caused changes in copper and zinc distribution in soil, indicating in most cases a discrete increase in the more labile metal forms. However, observed changes did not increase heavy metal concentration in plant leaves, indicating that assessment of metal availability by a chemical procedure (single extraction or metal fractionation) would not permit a good prediction of metal bioavailability. On the other hand, sludge application at a rate of 100 t ha⁻¹ to high-copper agricultural soils would not imply greater mobility of this metal on account of a greater sorbing capacity provided by the sludges. Such results would indicate that sludges from wastewater treatment plants, meeting the standards of heavy metal contents, regardless of the process by which they were obtained, may be applied to several kinds of soil, even to high-copper soils, with no risk of increasing heavy metal bioavailability to phytotoxic levels in the short range.     

Electrochemical combustion of herbicide mecoprop in aqueous medium using a flow reactor with a boron-doped diamond anode

The anodic oxidation of 1.8l of solutions with mecoprop (2-(4-chloro-2-methylphenoxy)-propionic acid or MCPP) up to 0.64 g l(-1) in Na2SO4 as background electrolyte within the pH range 2.0-12.0 has been studied using a flow plant containing a one-compartment filter-press electrolytic reactor with a boron-doped diamond (BDD) anode and a stainless steel cathode, both of 20-cm2 area. Electrolyses carried out in batch under steady conditions and operating at constant current density between 50 and 150 mA cm(-2) always yield complete mineralization due to the great concentration of hydroxyl radical generated at the BDD anode. The degradation rate is practically independent of pH and Na2SO4 concentration, but it becomes faster with increasing MCPP concentration, current density, temperature and liquid flow rate. The effect of these parameters on current efficiency and energy cost has also been investigated. Generated weak oxidants such as H2O2 and peroxodisulfate ion have little influence on the mineralization process. The kinetics for the herbicide decay follows a pseudo first-order reaction with a higher rate constant when current density increases. Aromatic products such as 4-chloro-o-cresol, 2-methylhydroquinone and 2-methyl-p-benzoquinone, and generated carboxylic acids such as maleic, fumaric, lactic, pyruvic, tartronic, acetic and oxalic, have been identified as intermediates by chromatographic techniques. The initial chlorine is completely released in the form of chloride ion, which is slowly oxidized to Cl2 at the BDD anode. A reaction pathway for MCPP mineralization involving all products detected is proposed.     

Effect of pH on the aggregation of a gray humic acid in colloidal and solid states

The potential of triethylenetetramine (TETA) to inhibit the oxidation of three pyrrhotites, Garson, McCreedy and Po-97 has been studied systematically and confirmed by comparing the release of Fe and SO4(2-) from samples with and without coating treatment. Each sample, original or coated by TETA, was exposed to oxygen, 1 x 10(-3) M FeCl3, and Acidithiobacillus ferrooxidans, respectively, for specific oxidation periods. Both abiotic and biotic oxidation of samples treated by this passivating agent has been reduced significantly in this study. Under the aerobic condition, lower concentrations of ferric, total Fe or SO4(2-) were obtained from the coated samples than those from the uncoated samples. In the presence of 1 x 10(-3) M FeCl3 at 30 degrees C, TETA was able to reduce oxidation rates of Garson, McCreedy and Po-97 by 83%, 79%, and 81% (based on Fe release), respectively. A higher pH, lower Eh, and lower concentrations of total Fe and SO4(2-) were also observed in the biotic oxidation of coated Garson by Acidithiobacillus ferrooxidans. The protection of pyrrhotite surface from oxidant attack by TETA barrier and the alkaline property of this coating agent can be used to interpret the inhibition of oxidation.     

Toxicology and detection methods of the alkaloid neurotoxin produced by cyanobacteria, anatoxin-a

Freshwater resources are under stress due to naturally occurring conditions and human impacts. One of the consequences is the proliferation of cyanobacteria, microphytoplankton organisms that are capable to produce toxins called cyanotoxins. Anatoxin-a is one of the main cyanotoxins. It is a very potent neurotoxin that was already responsible for some animal fatalities. In this review we endeavor to divulgate much of the internationally published information about toxicology, occurrence and detection methods of anatoxin-a. Cyanobacteria generalities, anatoxin-a occurrence and production as well as anatoxin-a toxicology and its methods of detection are the aspects focused in this review. Remediation of anatoxin-a occurrence will be addressed with a public health perspective. Final remarks call the attention for some important gaps in the knowledge about this neurotoxin and its implication to public health. Alterations of aquatic ecosystems caused by anatoxin-a is also addressed. Although anatoxin-a is not the more frequent cyanotoxin worldwide, it has to be regarded as a health risk that can be fatal to terrestrial and aquatic organisms because of its high toxicity.     

Fecundity,brood loss and egg development through embryogenesis of <Emphasis Type="Italic">Armases cinereum</Emphasis> (Decapoda: Grapsidae)

The present work is a comprehensive study of reproduction and embryonic development of Armases cinereum. Ovigerous A. cinereum (Bosc, 1802) females from Sebastian Inlet, Florida (9.88–19.4 mm CW) lay 2,000–12,000 eggs per brood, depending on their CW (mm): fecundity = 24.662 CW^1.9432. A. cinereum displayed significant brood loss through development (ca. 500 eggs per brood) independently from their CW (no senescence). However, since smaller females lay fewer eggs than larger ones, the percentage of eggs lost during embryonic development is greater in smaller females. The number of eggs carried on a later stage of development (potential fertility = 5.5593 CW^2.4417) is a more accurate estimate of the reproductive output and subsequent recruitment. Egg volume increased during development (64%, 0.025–0.041 mm³ or 0.36–0.43 mm of diameter, N = 270) and was strongly correlated with egg water content increase (19.21%, r = 0.89). Lipids, particularly fatty acids, seem to be the major energy source for embryonic development, decreasing 56.31 and 37.08% (respectively) during embryonic development; both are negatively correlated with egg volume (r = −0.90). The utilization of fatty acids through the different developmental stages of A. cinereum is presented. The most consumed fatty acids are the monounsatured (43.33 μg mg⁻¹ dw), followed by the saturated (29.91 μg mg⁻¹ dw) and polyunsaturated (24.03 μg mg⁻¹). Palmitic (16:0) and linoleic (18:2n-6) acids are preferentially consumed (19.5 and 17.9 μg mg⁻¹ dw, respectively). The high proportion of essential polyunsaturated fatty acids of C₁₈ and C₂₀ reflects the consumption of primary producers such as mangrove leaves. EPA/DHA ratio (2.85–3.84) and low DHA content indicated that this species appears in a medium-low level of the trophic chain. The low ratio of 18:1n-7/18:1n-9 and high percentage of 18:1n-9 (marker of carnivory) may be a sign of the consumption of juvenile invertebrates. The high percentage of odd-numbered FA indicated the occurrence of detritivores/scavenger behaviours. The fatty acid composition of the eggs reflects adult feeding ecology (omnivorous) and habitat.     

Genetic evidence fails to discriminate between <Emphasis Type="Italic">Macroramphosus gracilis</Emphasis> Lowe 1839 and <Emphasis Type="Italic">Macroramphosus</Emphasis><Emphasis Type="Italic">scolopax</Emphasis> Linnaeus 1758 in Portuguese waters

Fish belonging to the genus Macroramphosus are distributed throughout the Atlantic, Indian and Pacific oceans. Some authors consider this genus monotypic, Macroramphosus scolopax being the only valid species. Other authors consider (based on several morphological and ecological characters) that another species (Macroramphosus gracilis) exists and occurs frequently in sympatry with the first one. Intermediate forms are also reported in literature. In this paper, using the mitochondrial control region and the nuclear first S7 intron markers, we failed to find genetic differences between individuals considered to belong to both species as well as the intermediate forms. Our results suggest that in the northeastern Atlantic, Macroramphosus is represented by a single species, M. scolopax, with different morphotypes interbreeding in the sampling areas.