Evaluating effects of wind-induced pressure fluctuations on soil-atmosphere gas exchange at a landfill using stochastic modelling.

The impact of wind turbulence-induced pressure fluctuations at the soil surface on landfill gas transport and emissions to the atmosphere at an old Danish landfill site was investigated using stochastic modelling combined with soil property and gas transport data measured at the site. The impacts of soil physical properties (including air permeability and volumetric water content) and wind-induced pressure fluctuation properties (amplitude and temporal correlation) on landfill gas emissions to the atmosphere were evaluated. Soil-air permeability and pressure fluctuation amplitude were found to be the most important parameters. Wind-induced gas emissions were further compared with gas emissions caused by diffusion and by long-term pressure variations (due to passing weather systems). Here diffusion and wind-induced gas transport were found to be equally important with wind-induced gas transport becoming the most important at lower soil-air contents.     

The Ratio of Rubidium to Caesium in Threespine Stickleback (Gasterosteus Aculeatus), Benthic and Limnetic Sticklebacks (Gasterosteus), and Juvenile Sockeye Salmon (Oncorhynchus Nerka)

The ratios of rubidium to caesium were investigated in juvenile sockeye salmon (Oncorhynchus nerka), threespine stickleback (Gasterosteus aculeatus) and benthic and limnetic sticklebacks (Gasterosteus) as a means of separating zooplankton consumers from benthic prey consumers. Only benthic and limnetic sticklebacks had Rb to Cs ratios that were influenced by diet. Ratios were higher in limnetic stickleback whose diet consists mainly of zooplankton compared with benthic stickleback which consume benthic prey. Ratios in juvenile sockeye appeared to be influenced by the concentrations of rubidium and caesium in the egg yolk during the early period of growth. in three-spine stickleback that inhabited both the littoral and limnetic zone of the same lake, results suggested that fish must occupy each area for several months before rubidium to caesium ratios in tissues reflect concentrations in prey.     

Epidemiology of occupational acute traumatic hand injuries: a literature review

The purpose of this review was to summarize the literature on occupational, acute, traumatic hand injury and suggest directions for future research. In 1996, the leading occupational injury treated in United States' hospital emergency departments was an acute hand injury (e.g. laceration, crush or fracture). These injuries affected 30% of an estimated 3.3 million injured workers (990,000). Cuts and lacerations of the fingers ranked third after back and leg strains in the number of lost workday cases in the USA in 1994. The incidence rate of hand injuries studied in seven manufacturing environments around the world ranged from 4 to 11 per 100 workers per year. Workers aged 24 years or less had the highest risk of hand injury. Men had higher rates of severe hand injury than women.Despite the high frequency and significant amount of lost work time associated with these injuries, they are poorly understood from an etiological perspective. There is only one case-control study of occupational hand injury in the literature. That study suggested an important role for both fixed (age) and transient risk factors (doing an unusual task) at the time of the injury. More analytic epidemiological research is needed to identify potentially modifiable risk or protective factors (e.g. glove use) for acute hand injuries. In this regard, the case-crossover design, a relatively new epidemiological approach using cases as their own controls, could prove an efficient method for determining transient, modifiable risk factors for acute, occupational hand injury.     

New investigation findings on the 2006 Danvers,MA explosion

On November 22, 2006 the largest explosion in the history of Massachusetts occurred in Danvers, MA at approximately 2:46 am. This paper presents a detailed analysis into the potential causes and lessons learned from the Danvers explosion. Other investigative groups concluded that the cause of the explosion was an overheated production tank. However, the analyses presented here demonstrate that their proposed scenario could not have occurred and that other potential causes are more likely.Using the computational fluid dynamics tool FLACS, it was possible to investigate the chain of events leading to the explosion, including: (1) evaluating various leak scenarios by modeling the dispersion and mixing of gases and vapors within the facility, (2) evaluating potential ignition sources within the facility of the flammable fuel–air mixture, and (3) evaluating the explosion itself by comparing the resulting overpressures of the exploding fuel–air cloud with the structural response of the facility and the observed near-field and far-field blast damage. These results, along with key witness statements and other analyses, provide valuable insight into the likely cause of this incident. Based on the results of our detailed analysis, lessons learned regarding the investigative procedure and methods for mitigating this and future explosions are discussed.     

Motorcycle conspicuity: An evaluation and synthesis of influential factors

Motorcycles are overrepresented in fatal motor vehicle accidents: The death rate for motorcycle riders of about 35 per 100,000,000 miles of travel compares with an overall vehicle death rate of 2.57 per 100,000,000 miles. In the attempt to reduce the frequency of automobile-motorcycle collisions, numerous studies have manipulated motorcycle and motorcyclist characteristics to enhance conspicuity. In this paper, we give a review of studies that examined the effectiveness of these measures. Subsequently, we take a critical look at the methods used in these studies to evaluate the effectiveness of conspicuity treatments. Furthermore, we identify factors yet to be considered in the empirical research in this area that may contribute to collisions with motorcycles. These include information-processing failures at the identification and decision stage, as well as more or less permanent factors potentially responsible for different information-processing failures. Transient factors related to the failure to detect motorcycles might include alcohol, fatigue/lack of sleep, inattention, and information overload, whereas more permanent factors might include “cognitive” conspicuity and fi eld dependence.     

Towards the improvement of UN N.5 test method for the characterization of substances which in contact with water emit flammable gases

This paper deals with a sensitivity analysis of main parameters affecting the measurement of the gas flowrate emitted during testing substances for their potential to emit flammables gases in dangerous quantities where in contact with water, according to the UN N.5 test procedure. UN N.5 is described in the Manual of Tests and Criteria of United Nations (part of the Orange Book) (ONU Manual of Test and Criteria, 2008), serving both applications of international transport regulations as well as classifications of dangerous substances according to Globally the Harmonized System (GHS) and the derived regulation applying in the EU known as “CLP” Regulation (Regulation (EC) No 1271/2008). The main reason that justifies the present research is that the measurement of emitted gases is highly critical in the final classification resulting from the interpretation of the test results. Moreover, that idea has been raised to adapt the UN N.5 test protocol for classifying, in the future, substances that by contact with water would emit dangerous quantities of toxic gases.Experiments have been carried out to cover the analysis of the influence of ambient temperature, overall volume of glassware, nature of aqueous media, mass sample and sample-to-liquid mass ratio, since such parameters are not fixed within any defined range in the UN N.5 test procedure. The influence of the flow rate measuring device was also considered. Results confirm that the above mentioned parameters may play a significant role to such an extent as to finally alter the final classification resulting from the testing. Guiding principles have also been derived from our measurements and observations towards an improved and more robust UN test protocol in the future.     

Modular Design of Field Lysimeters for Specific Application Needs

In Europe, the use of direct methods using lysimeters for measuring water and solute flow in soils increased in recent years. Large weighable lysimeters are best suitable for obtaining reliable data about seepage water quantity and quality. Field lysimeters – lysimeters built in directly in agriculturally used areas – of high technical standard allow a precise determination of the influence of different cropping systems on groundwater quality. They combine the advantages of true field conditions and laboratory possibilities of varying parameters, handling and maintenance. Due to the specific needs of each application the instrumentation varies. Based on general remarks on the advantages of precise weighing lysimeters four standardized lysimeter configurations are presented. Beside the specific needs of design and setup of lysimeter stations, there is need to define general requirements to enable comparable results based on standardized basic design and to reduce individual mistakes.     

Photocrosslinking of an Acrylated Epoxidized Linseed Oil: Kinetics and its Application for Optimized Wood Coatings

Over the past few decades, the industry developed an increasing interest in using renewable, bio-based thermosetting polymers as matrix systems for composites and coating systems. In the present paper an acrylated epoxidized linseed oil (AELO) was synthesized from epoxidized linseed oil (ELO) through ring opening of the oxirane group using acrylic acid as the ring opening agent. The synthesized AELO was mixed with three different photoinitiators and cured under monochromatic conditions (???=?365?nm) at different light intensities and at different temperatures. The concentration of the initiators was aligned that all initiators absorb at 365?nm the same amount of light. The evolution of cure was monitored by using real-time infrared spectroscopy with a heated attenuated total reflection unit. The decrease of absorption in the measured spectra at 1,406?cm^?1 was used to calculate the conversion of acrylic double bonds with increasing time of UV light exposure to get information about the cure kinetics for each AELO mixture at different light intensities and different temperatures. Wood substrates were coated in a preliminary work with the AELO mixtures and after UV-curing some technological coating properties like gloss, scratch resistance, adhesion, and solvent resistance were tested. In combination with the information about the cure kinetics in the present work the coating properties were correlated with the cure evolution and the final degree of double bond conversion. The found correlation can be used in the future to find optimized coating conditions for the AELO mixtures on wood substrates.     

Use of inert C&D materials for seawall foundation: quality control measures

The technical viability of using inert construction and demolition (C&D) materials for the construction of seawall and breakwater foundations has been established by laboratory testing of the materials, numerical analysis of foundation stability, and a pilot field-scale engineering performance evaluation. However, quality control measures are still required so that only suitable materials are used for seawall and breakwater foundation construction. The development of different quality control measures for different site conditions is presented in this paper. The rationale, practicality, and implementation of these quality control measures are also discussed.     

Leachate recirculation effects on waste degradation: study on columns

The purpose of this study is to determine the impact of leachate recirculation on the degradation of municipal solid wastes (bioreactor concept). The study was carried out using columns containing approximately 50 kg of waste, in order to follow waste degradation over a limited time. Three types of waste were studied: fresh waste of standard composition, fresh waste of fermentable composition and some 8-yr-old waste extracted from a site in France. Measurement of the global parameters, such as chemical oxygen demand (COD), volatile acidity, alkalinity, leachate conductivity, methane potential of the wastes and biogas production monitoring (volume of CO2 and CH4 produced), were carried out. The quantity of oxydizable matter and biogas production was increased by the leachate recirculation, and the duration of the first degradation phases was reduced in all cases. Chloride, ammonium and organic pollution accumulation was observed according to the duration of recirculation. After 400 days of degradation, waste stabilization seemed to be reached for all of the recirculated columns (COD<300 mg/L O2, and methane potential reached).