Bromination of 2-methoxydiphenyl ether to an average of tetrabrominated 2-methoxydiphenyl ethers

Brominated 2-phenoxyanisoles (2-methoxydiphenyl ethers, 2-MeO-BDEs) are a class of halogenated natural products, produced by algae and sponges. Especially two tetrabrominated isomers, i.e. 2′-MeO-BDE 68 (BC-2) and 6-MeO-BDE 47 (BC-3), have also been frequently determined in environmental and food samples. In addition, 2-MeO-BDEs are under discussion as metabolites of polybrominated diphenyl ethers (PBDEs). In this study, we synthesized the backbone 2-methoxydiphenyl ether and brominated it to an average degree of four bromine substituents. The reaction mixture only contained one major product (∼90%) along with three further MeO-BDEs and ∼5% hydroxylated BDEs. In all likelihood, the HO-BDEs were formed in a side reaction by cleavage of the methoxy group. The major MeO-BDE was identified as 6′-methoxy-2,3′,4,4′-tetrabromodiphenyl ether (6′-MeO-BDE-66). The HO-BDEs were separated by KOH/n-hexane partitioning, and the resulting 2-MeO-BDEs were fractionated by means of high-speed counter-current chromatography (HSCCC). Due to the excellent enrichment facilities of HSCCC, some 15 MeO-BDEs, mainly present at traces only, could be detected in 26 fractions, and eight of them could be characterized by nuclear magnetic resonance spectroscopy (NMR). Only two of the compounds - 2′-MeO-BDE 68 and 6-MeO-BDE 123 - had been characterized as natural products while the prominent halogenated natural product 6-MeO-BDE 47 was not detected at all in the reaction product. The “non-natural” 2-MeO-BDEs may be useful internal standards in trace analysis.     

Transformation products and reaction kinetics of fragrances in advanced wastewater treatment with ozone

The reaction of the fragrance compounds 4,6,6,7,8,8-hexamethyl-1,3,4,7-tetrahydrocyclopenta[g]isochromene (HHCB), 1-(3,5,5,6,8,8-hexamethyl-6,7-dihydronaphthalen-2-yl)ethanone (AHTN), 1-tert-butyl-3,5-dimethyl-2,4,6-trinitrobenzene (musk xylene/MX), 1-(4-tert-butyl-2,6-dimethyl-3,5-dinitrophenyl)ethanone (musk ketone/MK), and 1-(2,3,8,8-tetramethyl-1,3,4,5,6,7-hexahydronaphthalen-2-yl)ethanone (OTNE) with ozone in tap water as well as waste water treatment plant (WWTP) effluents is described. Several transformation products are characterized by means of gas chromatography coupled to mass spectrometry. One transformation product (HHCB-Lactone) was confirmed by means of a true standard. Musk xylene and musk ketone do not react with ozone under the conditions used in this study. AHTN and HHCB reacted slowly to a multitude of transformation products, while OTNE reacted quickly to several stable transformation products. The reaction constants and half lives are used to predict removal efficiencies for full scale reactors.     

Modelling of the fate of selected endocrine disruptors in a municipal wastewater treatment plant in South East Queensland, Australia

The aim of this study was to develop a fugacity-based analysis of the fate of selected industrial compounds (alkylphenols and phthalates) with endocrine disrupting properties in a conventional activated sludge wastewater treatment plant (WWTP A) in South East Queensland, Australia. Using mass balance principles, a fugacity model was developed for correlating and predicting the steady-state-phase concentrations, the process stream fluxes, and the fate of four phthalates and four alkylphenols in WWTP A. Input data are the compound's physicochemical properties, measured concentrations and the plant's operating design and parameters. The relative amounts of chemicals that are likely to be volatilized, sorbed to sludge, biotransformed, and discharge in the effluent water was determined. Since it was difficult to predict biotransformation, measured concentrations were used to calibrate the model in terms of biotransformation rate constant. Results obtained by applying the model for the eight compounds showed <40% differences between most of the estimated and measured data from WWTP A. All eight compounds that were modelled in this study had high removal efficacy from WWTP A. Apart from benzyl butyl phthalate and bisphenol A, the majority is removed via biotransformation followed by a lesser proportion removed with the primary sludge. Fugacity analysis provides useful insight into compound fate in a WWTP and with further calibration and validation the model should be useful for correlative and predictive purposes.     

Mass balance assessment of triclosan removal during conventional sewage treatment

The antimicrobial agent triclosan (5-chloro-2-(2,4-dichlorophenoxy)phenol; TCS) is a member of a larger group of polychlorinated binuclear aromatic compounds frequently associated with adverse environmental and human health effects. Whereas the structure and function of TCS would suggest significant resistance to biotransformation, biological wastewater treatment currently is considered the principal destructive mechanism limiting dispersal of and environmental contamination with this compound. We explored the persistence of TCS in a typical full-scale activated sludge US sewage treatment plant using a mass balance approach in conjunction with isotope dilution liquid chromatography electrospray ionization mass spectrometry (ID-LC-ESI-MS) for accurate quantification. Average influent and effluent concentrations (mean +/- SD) of 4.7+/-1.6 and 0.07+/-0.06 microg 1(-1), respectively, revealed an apparent (liquid-phase) removal efficiency of 98+/-1%. However, further analyses demonstrated that the particle-active TCS (80+/-22% particle-associated in influent) was sequestered into wastewater residuals and accumulated in dewatered, digested sludge to concentrations of 30000+/-11000 microg kg-1. Overall, 50+/-19% (1640+/-610 g d-1) of the disinfectant mass entering the plant (3240+/-1860 g d-1) remained detectable in sludge, and less than half of the total mass (48+/-19%) was biotransformed or lost to other mechanisms. Thus, conventional sewage treatment was demonstrated to be much less effective in destroying the antimicrobial than the aqueous-phase removal efficiency of the plant would make believe. Furthermore, study findings indicate that the common practice of sludge recycling in agriculture results in the transfer of substantial quantities of TCS to US soils used, in part, for animal husbandry and crop production.     

Phytoremediation and sequestration of soil metals using the CRISPR/Cas9 technology to modify plants: a review

Environmental Chemistry Letters - Soil contamination by toxic metals is a major health issue that could be partly solved by using genetically-modified plants. For that, the recently developed...     

Post-combustion CO2-capture from coal-fired power plants: Preliminary evaluation of an integrated chemical absorption process with piperazine-promoted potassium carbonate

The simulation tool ASPEN Plus^® is used to model the full CO₂-capture process for chemical absorption of CO₂ by piperazine-promoted potassium carbonate (K₂CO₃/PZ) and the subsequent CO₂-compression train. Sensitivity analysis of lean loading, desorber pressure and CO₂-capture rate are performed for various solvent compositions to evaluate the optimal process parameters. EbsilonProfessional^® is used to model a 600 MW_el (gross) hard coal-fired power plant. Numerical equations for power losses due to steam extraction for solvent regeneration are derived from simulation runs. The results of the simulation campaigns are used to find the process parameters that show the lowest specific power loss. Subsequently, absorber and desorber columns are dimensioned to evaluate investment costs for these main components of the CO₂-capture process. Regeneration heat duty, net efficiency losses and column investment costs are then compared to the reference case of CO₂-capture by monoethanolamine (MEA).CO₂-capture by piperazine-promoted potassium carbonate with subsequent CO₂-compression to 110 bar shows energetic advantages over the reference process which uses MEA. Additionally, investment costs for the main components in the CO₂-capture process (absorber and desorber columns) are lower due to the enhanced reaction kinetics of the investigated K₂CO₃/PZ solvent which leads to smaller component sizes.     

Implementing landscape fragmentation as an indicator in the Swiss Monitoring System Of Sustainable Development (Monet)

There is an increasing need and interest in including indicators of landscape fragmentation in monitoring systems of sustainable landscape management. Landscape fragmentation due to transportation infrastructure and urban development threatens human and environmental well-being by noise and pollution from traffic, reducing the size and viability of wildlife populations, facilitating the spread of invasive species, and impairing the scenic and recreational qualities of the landscape. This paper provides the rationale, method, and data for including landscape fragmentation in monitoring systems, using as an example the Swiss Monitoring System of Sustainable Development (Monet). We defined and compared four levels of fragmentation analysis, or fragmentation geometries (FGs), each based on different fragmenting elements, e.g., only anthropogenic, or combinations of anthropogenic and natural elements. As each FG has specific strengths and weaknesses, the most appropriate choice of FG depends on the context and objectives of a study. We present data on the current degree of landscape fragmentation for the five ecoregions and 26 cantons in Switzerland for all four FGs. Our results show that the degree of landscape fragmentation as quantified by the effective mesh size method is strongly supported by the postulates and indicator selection criteria of Monet, and we identify the most suitable FG focusing on the land area below 2100 m (e.g., excluding lakes) and allowing for an equitable comparison of fragmentation degrees among regions that differ in area covered by lakes and high mountains. For a more detailed analysis of landscape fragmentation in the context of environmental impact assessments and strategic environmental assessments, a combination of all four FGs may provide a more informative tool than any single FG.     

Impact of weathered multi-walled carbon nanotubes on the epithelial cells of the intestinal tract in the freshwater grazers Lymnaea stagnalis and Rhithrogena semicolorata

Freshwater grazers are suitable organisms to investigate the fate of environmental pollutants, such as weathered multi-walled carbon nanotubes (wMWCNTs). One key process is the uptake of ingested materials into digestive or absorptive cells. To address this, we investigated the localization of wMWCNTs in the intestinal tracts of the mud snail Lymnaea stagnalis (L. stagnalis) and the mayfly Rhithrogena semicolorata (R. semicolorata). In L. stagnalis, bundles of wMWCNTs could be detected in the midgut lumen, whereas only single wMWCNTs could be detected in the lumina of the digestive gland. Intracellular uptake of wMWCNTs was detected by transmission electron microscopy (TEM) but was restricted to the cells of the digestive gland. In larvae of R. semicolorata, irritations of the microvilli and damages in the apical parts of the epithelial gut cells were detected after feeding with 1 to 10 mg/L wMWCNTs. In both models, we detected fibrillar structures in close association with the epithelial cells that formed peritrophic membranes (PMs). The PM may cause a reduced transmission of wMWCNT bundles into the epithelium by forming a filter barrier and potentially protecting the cells from the wMWCNTs. As a result, the uptake of wMWCNTs into cells is rare in mud snails and may not occur at all in mayfly larvae. In addition, we monitor physiological markers such as levels of glycogen or triglycerides and the RNA/DNA ratio. This ratio was significantly affected in L. stagnalis after 24 days with 10 mg/L wMWCNTs, but not in R. semicolorata after 28 days and 10 mg/L wMWCNTs. However, significant effects on the energy status of R. semicolorata were analysed after 28 days of exposure to 1 mg/L wMWCNTs. Furthermore, we observed a significant reduction of phagosomes per enterocyte cell in mayfly larvae at a concentration of 10 mg/L wMWCNTs (p?<?0.01).

     

Concentrations of PFOS, PFOA and other perfluorinated alkyl acids in Australian drinking water

Perfluorinated alkyl acids (PFAAs) are persistent environmental pollutants, found in the serum of human populations internationally. Due to concerns regarding their bioaccumulation, and possible health effects, an understanding of routes of human exposure is necessary. PFAAs are recalcitrant in many water treatment processes, making drinking water a potential source of human exposure. This study was conducted with the aim of assessing the exposure to PFAAs via potable water in Australia. Sixty-two samples of potable water, collected from 34 locations across Australia, including capital cities and regional centers. The samples were extracted by solid phase extraction and analyzed via liquid chromatography/tandem mass spectrometry for a range of perfluoroalkyl carboxylates and sulfonates. PFOS and PFOA were the most commonly detected PFAAs, quantifiable in 49% and 44% of all samples respectively. The maximum concentration in any sample was seen for PFOS with a concentration of 16 ng L⁻¹, second highest maximums were for PFHxS and PFOA at 13 and 9.7 ng L⁻¹. The contribution of drinking water to daily PFOS and PFOA intakes in Australia was estimated. Assuming a daily intake of 1.4 and 0.8 ng kg⁻¹ bw for PFOS and PFOA the average contribution from drinking water was 2-3% with a maximum of 22% and 24% respectively.     

Effects of nano-TiO(2) in combination with ambient UV-irradiation on a leaf shredding amphipod

Production and use of engineered nanoparticles, such as titanium dioxide nanoparticles (nTiO₂), is increasing worldwide, enhancing their probability to enter aquatic environments. However, direct effects of nTiO₂ as well as ecotoxicological consequences due to the interactions of nTiO₂ with environmental factors like ultraviolet (UV) irradiation on representatives of detrital food webs have not been assessed so far. Hence, the present study displayed for the first time adverse sublethal effects of nTiO₂ at concentrations as low as 0.2 mg L⁻¹ on the leaf shredding amphipod Gammarus fossarum both in presence and absence of ambient UV-irradiation following a 7-d exposure. In absence of UV-irradiation, however, the effects seemed to be driven by accumulation of nTiO₂ at the bottom of the test vessels to which the gammarids were potentially exposed. The adverse sublethal and lethal effects on gammarids caused by the combined application of nTiO₂ and ambient UV-irradiation are suggested to be driven by the formation of reactive oxygen species. In conclusion, both the accumulation of nTiO₂ at the bottom of the test vessel and the UV induced formation of reactive oxygen species clearly affected its ecotoxicity, which is recommended for consideration in the environmental risk assessment of nanoparticles.