Targeting arsenic-safe aquifers for drinking water supplies

At present, 70 countries worldwide are affected by groundwater contamination by arsenic (As) released from predominantly geogenic sources. Consequently, the As problem is becoming a global issue. The option to target As-safe aquifers, which uses geological, geochemical, hydrogeological, morphological and climatic similarities to delimit As-safe aquifers, appears as a sustainable mitigation option. Two pilot areas, Meghna Flood Plain in Matlab Upazila, representative of Bengal Delta in Bangladesh, and Río Dulce Alluvial Cone, representing a typical aquifer setting in the Chaco-Pampean Plain in Argentina groundwater As occurrence, were compared. In rural Bangladesh, As removal techniques have been provided to the population, but with low social acceptance. In contrast, “targeting As-safe aquifers” was socially accepted in Bangladesh, where sediment color could be used to identify As-safe aquifer zones and to install safe wells. The investigation in Argentina is more complex because of very different conditions and sources of As. Targeting As-safe aquifers could be a sustainable option for many rural areas and isolated peri-urban areas.     

It pays to have an eye for emotions: Emotion recognition ability indirectly predicts annual income

This study integrates the emotion and social influence literatures to examine how emotion recognition ability (ERA) relates to annual income. In a sample of 142 employee–peer–supervisor triads from a broad range of jobs and organizations, we find that people's level of ERA indirectly relates to how much they earn per year. The relationship between ERA and annual income is mediated sequentially through political skill and interpersonal facilitation. The results imply that emotional abilities allow people not only to process affect‐laden information effectively but also to use this information to successfully navigate the social world of organizations in the pursuit of prosperity. Copyright © 2014 John Wiley & Sons, Ltd.     

Halogenated compounds and climate change: future emission levels and reduction costs

OBJECTIVES: This work assesses the contribution to climate change resulting from emissions of the group of halogenated greenhouse gases. METHODS: A bottom-up emission model covering 22 technological sectors in four major regions is described. Emission estimates for 1996 and projection for 2010 and 2020 are presented. The costs for deep cuts into projected emission levels are calculated. RESULTS: The substances covered by this study have contributed emissions of 1100 +/- 800 MT CO2 equivalents per year in 1996. In terms of their relative contribution to emissions of CO2 equivalents, this corresponds to 3 +/- 2% of global emissions of all anthropogenic greenhouse gases. The wide range of uncertainty is due to the poorly quantified net global warming potential of the ozone depleting substances, which have an indirect cooling effect on climate through the destruction of stratospheric ozone. For annual emissions of HFCs, PFCs and SF6 (which are regulated under the Kyoto Protocol and for which global warming potentials are well defined), the relative contribution is projected to increase to 2% (600 MT CO2 eq.) of global greenhouse gas emissions by 2010. This trend is expected to continue, emissions are projected to grow to a contribution of roughly 3% (870 MT CO2 eq.) in 2020 compared to 0.9% (300 MT CO2 eq.) in 1996. For HFCs, PFCs and SF6, this study identifies global emission reduction potentials of 260 MT CO2 eq. per year in 2010 and 640 MT CO2 eq. per year in 2020 at below US$ 50 per ton. These values correspond to roughly 40% and 75% of projected emissions in 2010 and 2020, respectively.     

Mercury removal from incineration flue gas by organic and inorganic adsorbents

Experiments were performed to investigate various adsorbents for their mercury removal capabilities from incineration flue gases. Four different materials were tested; Zeolite, Bentonite, activated carbon (AC), and wood char. Real incineration off-gas and in-lab simulated combustion flue gases (N2 + Hg) were used. Three cylindrical-shaped sorbent columns with 5 cm in diameter and 20 cm in length were used. The gas flow rate was fixed at 660 l/h at all times. Concentrations of NO, CO, O2, CO2, SO2, H2O, HCl, and mercury were continuously monitored. Mercury removal efficiencies of natural Zeolite and Bentonite were found to be much lower than those of the referenced AC. Amount of Hg removed were 9.2 and 7.4 microg/g of Zeolite and Bentonite, respectively. Removal efficiencies of each layer consisted of inorganic adsorbents were no higher than 7%. No significant improvement was observed with sulfur impregnation onto the inorganic adsorbents. Organic adsorbents (wood char and AC) showed much higher mercury removal efficiencies than those of inorganic ones (Zeolite and Bentonite). Mercury removal efficiency of wood char reached over 95% in the first layer, showing almost same effectiveness as AC which currently may be the most effective adsorbents for mercury. Amount of mercury captured by wood char was approximately 0.6 mg/g of wood char, close to the amount captured by AC tested in this study. Hence, wood char, made from the waste woods through a gasification process, should be considered as a possible alternative to relatively expensive AC.     

Investigations into the PCDD contamination of topsoil,river sediments and kaolinite clay in Queensland,Australia

Recent findings of elevated PCDDs from an unknown source in the coastal marine environment of Queensland, Australia has instigated further investigations into the distribution of, and environments associated with the PCDD contamination. This study presents data for OCDD concentrations in the coastal, mountainous and inland environment of Queensland. Additionally, full 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins and dibenzofuran (PCDD/F) profiles from different land-use types and environments in the coastal region were analysed. Distinct east–west gradients were detected in topsoil collected from various bushland regions with elevated OCDD concentrations confined to the coastal region. However, PCDD/F results from topsoil and river sediments collected in the Queensland coastal region suggest that elevated OCDD concentrations cannot be attributed to any of the environments, land-use or industry types investigated. PCDD/F congener profiles from select samples were remarkably similar to those previously described in marine sediments collected along the entire Queensland coastline. In addition, kaolinite clay samples from Queensland exhibited elevated OCDD concentrations, and PCDD/F profiles in these samples were similar to those detected in kaolinite clays elsewhere. Natural formation processes have been hypothesised as the source of elevated PCDDs in Queensland and other locations, where similar PCDD/F profiles and the general lack of anthropogenic sources are evident. This study presents additional data supporting this hypothesis and provides further information that may assist in the identification of the processes involved in the natural formation of PCDDs.     

Preparing to measure the effects of the NOx SIP call--methods for ambient air monitoring of NO,NO2, NOy,and individual NOz species

The capping of stationary source emissions of NOx in 22 states and the District of Columbia is federally mandated by the NOx SIP Call legislation with the intended purpose of reducing downwind O3 concentrations. Monitors for NO, NO2, and the reactive oxides of nitrogen into which these two compounds are converted will record data to evaluate air quality model (AQM) predictions. Guidelines for testing these models indicate the need for semicontinuous measurements as close to real time as possible but no less frequently than once per hour. The measurement uncertainty required for AQM testing must be less than +/-20% (+/-10% for NO2) at mixing ratios of 1 ppbv and higher for NO, individual NOz component compounds, and NOy. This article is a review and discussion of different monitoring methods, some currently used in research and others used for routine monitoring. The performance of these methods is compared with the monitoring guidelines. Recommendations for advancing speciated and total NOy monitoring technology and a listing of demonstrated monitoring approaches are also presented.     

COS,CS2 and SO2 in aluminium smelter exhaust

Measurements of carbonyl sulfide (COS) and carbondisulfide (CS₂) were carried out on samples drawn from a smoke stack of an aluminium smelter. Volume mixing ratios of 6 ppm COS and 0.1 ppm CS₂ were measured for gases from the electrolysis unit that had previously passed an Al₂O₃ fluid bed reactor and electrostatic precipitators. Specific emissions of 1.6 kg COS and 0.03 kg CS₂ per ton of primary aluminium were found. Extrapolating from this particular smelter’s conditions to a world mix specific COS emissions of about 4 kg/t(Al) are calculated resulting in emissions of annually 0.08 Tg COS into the atmosphere due to electrolytic aluminium production in 1995. Besides the photochemical conversion of anthropogenic CS₂ aluminium production is established to be the second major industrial source of COS probably exceeding automotive tire wear’s and coal combustion’s contributions.     

The functional and physiological status of Gammarus fossarum (Crustacea; Amphipoda) exposed to secondary treated wastewater

Climate change scenarios predict lower flow rates during summer that may lead to higher proportions of wastewater in small and medium sized streams. Moreover, micropollutants (e.g. pharmaceuticals and other contaminants) continuously enter aquatic environments via treated wastewater. However, there is a paucity of knowledge, whether extended exposure to secondary treated wastewater disrupts important ecosystem functions, e.g. leaf breakdown. Therefore, the amphipod shredder Gammarus fossarum was exposed to natural stream water (n = 34) and secondary treated wastewater (n = 32) for four weeks in a semi-static test system under laboratory conditions. G. fossarum exposed to wastewater showed significant reductions in feeding rate (25%), absolute consumption (35%), food assimilation (50%), dry weight (18%) and lipid content (22%). Thus, high proportions of wastewater in the stream flow may affect both the breakdown rates of leaf material and thus the availability of energy for the aquatic food web as well as the energy budget of G. fossarum.     

Comprehensive study of endocrine disrupting compounds using grab and passive sampling at selected wastewater treatment plants in South East Queensland, Australia

Chemical (gas chromatography-mass spectrometry, GC-MS) and biological (E-Screen assay) analyses were used to determine the concentrations of 15 endocrine disrupting compounds (EDCs) and estrogen equivalent (EEq) in grab and passive samples from five municipal wastewater treatment plants (WWTPs) in South East Queensland, Australia. EEq concentrations derived by E-Screen assays for the grab samples were between 108-356 ng/L for the influents and < 1-14.8 ng/L for the effluents with the exception of one effluent sample which was at 67.8 ng/L EEq. The EDC concentrations and EEq values for the passive samples were several times lower than those of the grab samples: a decrease probably caused by, but not limited to biofouling, low flow rate, biodegradation and temperature which can progressively reduce the uptake of compounds into the sampler. At this stage, grab sampling is the most reliable method for field monitoring; nevertheless, passive sampler is a useful sampling tool but the method requires more research to ensure that the information obtained can be interpreted appropriately. Although alkylphenols and phthalates were detected at higher concentrations in the wastewater samples as compared to natural hormones, the environmental risk may be negligible as their estrogenic potencies are several orders of magnitude lower than that of the natural estrogens. In most wastewater samples, the natural estrogens contributed to 60% or more of the EEq value. Removal efficacy of most estrogenic and xenoestrogenic compounds from the conventional activated sludge or biological nutrient removal (BNR) WWTPs monitored in this study was in the range of 80-> 99%. The efficiency of the WWTPs in removing estrogenic activity was > 95%. The EEqs of the E-Screen and those calculated from the results of extensive chemical analyses using the estradiol equivalency factors were comparable for most of the WWTPs samples.