Effects of calcium hydroxide and calcium chloride addition to bentonite in iron ore pelletization.

Pyrite ash is created as waste from the roasting of pyrite ores during the production of sulphuric acid. These processes generate great amounts of pyrite ash waste that is generally land filled. This creates serious environmental pollution due to the release of acids and toxic substances. Pyrite ash waste can be utilized in the iron production industry as a blast furnace feed to process this waste and prevent environmental pollution. The essential parameters affecting the pelletization process of pyrite ash were studied using bentonite as a binder. Experiments were then carried out using bentonite and a mixture of bentonite with calcium hydroxide and calcium chloride in order to make the bentonite more effective. The metallurgical properties of pyrite ash, bentonite, calcium hydroxide, calcium chloride, a mixture of these and sintered pellets were studied using X-ray analysis. The crushing strength tests were carried out to investigate the strength of pyrite ash waste pellets. The results of these analyses showed that pyrite ash can be agglomerated to pellets and used in the iron production industry as a blast furnace feed. The crushing strength of the pellets containing calcium hydroxide and calcium chloride in addition to bentonite was better than the strength of pellets prepared using only bentonite binder.     

DDT in fish from the Bulgarian region of the Black Sea

In spite of a worldwide reduction in the utilization of organochlorine pesticides (OCPs), they are still a problem for the aquatic environment and human health. The Black Sea is still being polluted with persistent chemicals, including OCPs. Aquatic organisms (sprat, scad, bluefish, shad, belted bonito, goby, and black mussel) with different feeding behaviours were sampled on a seasonal basis from the Bulgarian region of the Black Sea, and the concentrations of 13 OCP residues were determined. Although many of the OCPs were not detected in the samples, in all samples 1,1,1-trichloro-2,2-bis(4-chlorophenyl) ethane (DDT) was present mainly in the form of its metabolites 1,1-dichloro-2,2-bis(4-chlorophenyl) ethane (DDD) and 1,1-dichloro-2,2-bis(4-chlorophenyl) ethylene (DDE). Only about 12% of the total DDT was present as the parent compound pp-DDT, which suggests that it was not being used recently in the region. The total DDT concentrations were generally below 150 μg kg^-1 fresh weight, but higher levels—up to 354 μg kg^-1 fresh weight—were also measured for fish species with a high fat content. Between-species differences were observed, even when the concentrations were presented on a fat-level basis. DDT concentrations did not show any significant changes over the 2-yr sampling period. Fish sampled in the northern areas of the Bulgarian Black Sea coast seemed to contain higher DDT levels than those from the southern areas, suggesting a major (historical) influence of the Danube River. For permanent monitoring purposes, the utility of Black Sea gobies and scad should be considered.     

Design and validation of a practical index for trauma assessment

In the past 20 years a variety of indices have been suggested for measuring the severity of trauma, however none of them meets the requirement of being a simple and objective instrument that can be utilized efficiently by lay persons and providers of health services without previous experience in triaging. A new system has been proposed which meets this requirement and which has been validated with 197 injured persons at the emergency ward of the Valle University Hospital in Call, Colombia. The instrument showed a high level of concordance with the conventional triaging method and classifies victims into four categories: critical with recovery unlikely, critical but recoverable, moderately serious, and ambulatory. There is discussion on the reliability of this instrument and it is recommended that it be validated with victims from larger disasters. Regardless, it has the advantage of being specific and free of the subjectivity that characterizes other indices.     

Characteristic features of body composition and metabolism in some interzonal copepods

Protein, lipid, phosphorus, and organic carbon contents, as well as electron transport system (ETS) activity, lactatedehydrogenase activity, and gut evacuation rate, were measured in four interzonal species of Pacific copepods:Calanus australis, C. pacificus, Eucalanus inermis, andE. elongatus f.hyalinus, collected at the upwelling areas off Peru (8°S) and California (27°N), and in the middle of the North Pacific (30°N), from February to April 1987. The two Eucalanidae species —E. inermis andE. elongatus — have distinctive biochemical and elemental body composition and rates of main physiological processes. Relative protein, lipid, phosphorus, and organic carbon contents (µg mg^–1 wet weight) in these species were, respectively, ca. 1/7 to 1/10, 1/5 to 1/20, 1/5 to 1/10, and 1/5 those inCalanus spp. Likewise, oxygen uptake rate per unit of wet weight (based on ETS activity) inE. inermis andE. elongatus was 5 to 10% of that in calanids; a similar difference was found in phosphorus excretion rate. In addition, gut evacuation rates inE. inermis andE. elongatus were ca. one-fifth of those inCalanus spp. Based on these data, we considered the eucalanids as belonging to a distinctive physiological group, figuratively named jelly-body copepods. In contrast with calanids, active lactatedehydrogenase has been found in the bodies ofE. inermis andE. elongatus, apparently allowing them to survive for a long time in layers of extremely low oxygen content (<0.2 ml l^–1). The adaptive value of physiological features in these eucalanids and typical calanids is compared.     

The extraction of aged polycyclic aromatic hydrocarbon (PAH) residues from a clay soil using sonication and a Soxhlet procedure: a comparative study

A sonication method was compared with Soxhlet extraction for recovering polycyclic aromatic hydrocarbons (PAH) from a clay soil that had been contaminated with tar materials for several decades. Using sonication over an 8 h extraction period, maximum extraction of the 16 US EPA priority PAH was obtained with dichloromethane (DCM)-acetone (1 + 1). The same procedure using hexane-acetone (1 + 1) recovered 86% of that obtained using DCM-acetone (1 + 1). PAH recovery was dependent on time of extraction up to a period of 8 h. The sonication procedure showed that individual PAH are extracted at differing rates depending on the number of fused rings in the molecule. Soxhlet extraction [with DCM-acetone (1 + 1)] over an 8 h period recovered 95% of the PAH removed by the sonication procedure using DCM-acetone (1 + 1), indicating that rigorous sonication can achieve PAH recoveries similar to those obtained by Soxhlet extraction. The lower recovery with the Soxhlet extraction was explained by the observed losses of the volatile PAH components after 1-4 h of extraction. The type of solvent used, the length of time of extraction and extraction method influenced the quantification of PAH in the soil. Therefore, the study has implications for PAH analyses in soils and sediments, and particularly for contaminated site assessments where the data from commercial laboratories are being used. The study emphasizes the importance of establishing (and being consistent in the application of) a vigorous extraction, particularly for commercial laboratories that handle samples of soil in batches (at different times) from a single site investigation or remediation process. The strong binding of PAH to soil, forming aged residues, has significant implications for extraction efficiency. This paper illustrates the problem of the underestimation of PAH using the US EPA method 3550, specifically where a surrogate spike is routinely employed and the efficiency of the extraction procedure for aged residues is unknown. The implications of this study for environmental monitoring, particularly where numerous batches of samples from a single site assessment or remediation program are submitted to commercial laboratories, is that it would be advisable for these laboratories to check their existing method's extraction efficiencies by conducting a time course sonication extraction on their particular soil to determine the optimum extraction time.