Automated micro-transfer printing with cantilevered stamps

This paper demonstrates the use of a flexible instrumented stamp to enable automated micro transfer printing as a route to large-area, deterministic assembly of microstructured device components or ‘inks’. The ability to instrument the stamp, a critical component for retrieval and placement of a micro device, to detect contact and monitor localized forces during critical events in the printing process not only allows for the development of a robust manufacturing process, but also for a unique vantage point from which to study fundamental issues and phenomena associated with adhesion and delamination of thin films from a variety of substrate materials. This paper presents basic design analysis on the requirements of the cantilevers for compatibility with a typical transfer printing environment. Off-the-shelf thin film strain gages are integrated with a thin elastomeric post as a preliminary prototype and the feasibility of transfer printing with it is demonstrated. Further, the set-up is calibrated to produce force signals for event detection and in situ diagnosis of the process.     

Pastoral farmland habitat diversity in south-east Ireland

In this study, habitat surveys were undertaken on 50 grass-based farms in SE Ireland and data digitised onto aerial photography. Additional data i.e. stocking rates, and participation (or otherwise) in the Irish Rural Environment Protection Scheme (REPS) were collected and analysed as possible explanatory variables for farm habitat composition.Results indicated that approximately 14.3% of the land area of sampled farms comprised of semi-natural habitat types, a proportion substantially greater than has been reported for many other European countries. The most frequently recorded semi-natural habitats included, field boundaries, scrub, and deciduous and riparian woodlands.Multivariate analysis of farm habitat configuration showed a strong dichotomy between dairy and non-dairy farming systems. Habitats such as intensively managed grassland and built ground were closely associated with dairy-based enterprises. In contrast, the incidence of other habitat types was associated with non-dairy and/or REPS participating enterprises. The ecological quality of field boundaries as assessed by the Field Boundary Evaluation and Grading System (FBEGS) Index was significantly greater on dairy, compared with dry-stock farms.This dichotomy in farm habitat composition is not reflected within current Agri-Environment (AE) policy. Integration of locally important drivers of habitat diversity into the design and implementation of AE policy, is integral to the successful performance of AE schemes.     

LCA of eucalyptus wood charcoal briquettes

This paper sets out to describe the environmental impact assessment for wood charcoal briquettes produced from eucalyptus wood in Brazil, with specific reference to those impacts associated with Global Warming Potential. To achieve that objective, the work was undertaken in accordance with ISO 14040 "Environmental management - Life cycle assessment - Principles and framework" which describes essential LCA characteristics and good practices. Charcoal briquettes are produced from two basic raw materials, charcoal fines and starch. The fines result from the production of charcoal from sustainably managed eucalyptus plantations. Starch is extracted from babaçu pulp in the Amazon region. Multi-output processes were allocated based on income from the different by-products. The results showed that more than 90% of incoming CO₂ was due to biomass production for charcoal, and the remainder to starch biomass production. Based on Brazilian data, as well as information provided by the GaBi4.3 database, it turned out that supplying the energy content of 1 kg of briquettes resulted in the sequestration of 3.9690 kg of CO₂, i.e. around 4 kg of CO₂ per kg of briquettes produced. CO₂ emissions throughout the briquette production process are totally compensated for by the environmental quality of the raw materials used.     

Probabilistic risk assessment for long-range atmospheric transport of radionuclides

A simplified means of probabilistic risk assessment (PRA) for long-range atmospheric transport based on a K-diffusion model is presented. In a case study, model parameters are estimated by comparing with the results of long-range atmospheric dispersion model calculations using one-year numerical weather prediction model data. It is found that the estimated ensemble mean provides a reasonable first approximation to the total dry and wet deposition from the one-year continuous release.     

Fate of Irgarol 1051, diuron and their main metabolites in two UK marine systems after restrictions in antifouling paints

Two major antifouling biocides used worldwide, Irgarol 1051 and diuron, and their degradation products in Shoreham Harbour and Brighton Marina, UK were studied during 2003-2004. The highest concentrations of Irgarol 1051 were 136 and 102 ng L(-1) in water and 40 and 49 ng g(-1) dry weight in sediments for Shoreham Harbour and Brighton Marina, respectively. As the degradation product of Irgarol 1051, M1 was also widespread, with the highest concentration of 59 ng L(-1) in water and 23 ng g(-1) in sediments in Shoreham Harbour, and 37 ng L(-1) in water and 5.6 ng g(-1) in sediments in Brighton Marina. The target compounds showed enhanced concentrations during the boating season (May-July), when boats were being re-painted (January-February), and where the density of pleasure crafts was high. Overall, the concentration of Irgarol 1051 decreased significantly from late 2000 to early 2004, indicating the effectiveness of controlling its concentrations in the marine environment following restricted use. Diuron was only detected in 14% of water samples, and mostly absent from sediment samples.     

Evaluation of cleaning and disinfection protocols for commercial farm equipment following a foreign animal disease outbreak

This study evaluated the microbiocidal efficacy of a cleaning and disinfection (C&D) treatment using stainless-steel coupons applied to three common types of animal mortality transport vehicles when exposed to agricultural conditions. Metal test coupons, inoculated with bacteriophage MS2, were affixed to the undercarriage of three types of animal mortality transport vehicles at various locations. Coupons were grimed by maneuvering the test vehicles down a series of wet dirt roads. Coupons were attached and extracted at various points to evaluate C&D performance with and without grime. C&D efficacy using a water-supplied pressure washing system and a dilute sodium hypochlorite (NaOCl) solution was determined by comparing the difference in recovered viable virus between positive control coupons and test coupons. The results demonstrated a relatively high surface decontamination efficacy, with all but one location showing >5 log reduction of MS2. Coupons located on the roll-off truck's inside-back bumper contained the highest level of grime and resulted in a 4 log reduction of MS2. There was no significant difference in C&D efficacy across vehicle types, but locations impacted by grime and lack of accessibility achieved lower efficacies on average. These findings suggest that common C&D protocols, when applied to farm mortality transport vehicles, are effective. Hard-to-access locations containing high levels of grime may be candidates for additional targeted treatment.     

Face mask and medical waste generation in the City of Baguio,Philippines: its current management and GHG footprint

Journal of Material Cycles and Waste Management - The daily use of facemask to prevent virus transmission increases the negative effect on the environment because of improper waste disposal. Due to...     

Coastal armoring and sinking property values: the case of seawalls in California

Environmental Economics and Policy Studies - Rising sea levels necessitate careful consideration of different forms of coastal protection but cost-benefit analysis is limited when important...     

Comparison and Evaluation of Gridded Precipitation Datasets in a Kansas Agricultural Watershed Using SWAT

Gridded precipitation datasets are becoming a convenient substitute for gauge measurements in hydrological modeling; however, these data have not been fully evaluated across a range of conditions. We compared four gridded datasets (Daily Surface Weather and Climatological Summaries [DAYMET], North American Land Data Assimilation System [NLDAS], Global Land Data Assimilation System [GLDAS], and Parameter‐elevation Regressions on Independent Slopes Model [PRISM]) as precipitation data sources and evaluated how they affected hydrologic model performance when compared with a gauged dataset, Global Historical Climatology Network‐Daily (GHCN‐D). Analyses were performed for the Delaware Watershed at Perry Lake in eastern Kansas. Precipitation indices for DAYMET and PRISM precipitation closely matched GHCN‐D, whereas NLDAS and GLDAS showed weaker correlations. We also used these precipitation data as input to the Soil and Water Assessment Tool (SWAT) model that confirmed similar trends in streamflow simulation. For stations with complete data, GHCN‐D based SWAT‐simulated streamflow variability better than gridded precipitation data. During low flow periods we found PRISM performed better, whereas both DAYMET and NLDAS performed better in high flow years. Our results demonstrate that combining gridded precipitation sources with gauge‐based measurements can improve hydrologic model performance, especially for extreme events.