Predicting Radon Testing Among University Employees

Abstract

To determine covariates of radon testing behavior, we surveyed by mail a random sample of all Boston University employees (N = 915) six to nine months after they had been informed of the availability of radon testing services through the University's medical center. The response rate was 58%. Analysis suggests blue collar workers were underrepresented within the response rate. Slightly more than half of the respondents (51%) were men. The majority (69%) were under the age of 45. Twenty-seven percent of the respondents (N = 143) had tested their homes for radon. Bivariate analysis revealed important differences between radon testers and nontesters. Testers were 12 times more likely to be home owners than renters (p = 0.00), and were more knowledgeable about radon's characteristics and testing procedures (p = 0.00). Testers were more likely to view radon as a serious problem (p = 0.00), to consider radon testing efficacious (p = 0.00), and to consider themselves susceptible to exposure (p = 0.00). Testers were also less likely to perceive barriers to radon testing. We used logistic regression to compare the usefulness of the Health Belief Model and the Diffusion of Innovations Model in predicting radon testing. We concluded that the knowledge deficits and barriers to radon testing identified in this study should be targeted in radon educational interventions.     

Safety climate

Safety climate, the objective measurement of attitudes and perceptions toward Occupational Health & Safety (OH&S) issues, has been largely ignored and measures such as lost time and frequency rate have been used to determine the efficacy of OH&S programs. Yet, it is clear that measuring the precursors of accidents identified in a safety climate analysis provides a powerful proactive management tool. This paper reports on safety climate factors found in clerical and service organizations in Australia. Concurrent validity studies are reported. In contradistinction to published studies, it is argued that safety climate factors are not stable across organizations. The significance of this for planning and assessing the efficacy of OH&S programs is discussed. It is concluded that although safety climate factors are not stable, the safety climate factor pattern identified in organizations provides a powerful management tool for designing OH&S programs.     

LANDSAT MID-INFRARED DATA AND GIS IN REGIONAL SURFACE SOIL-MOISTURE ASSESSMENT1

ABSTRACT: Landsat satellite Thematic Mapper (TM) data were used to assess regional soil moisture conditions. The mid-infrared (MIR) data of TM band 7 were overlain onto four principal land-use categories (Agricultural/Irrigated, Urban/Clearings, Forest/ Wetlands, Water) using a geographic information system (GIS). M data were used to assess four qualitative surface soil-moisture conditions (water/very wet, wet, moist, and dry) within each land-use category of a 208,354 ha southwestern Florida study area. The MIR response was inversely related to the qualitative surface soil-moisture content. Integration of Landsat TM MIR data with land use through GIS appears to be a useful technique for high-resolution regional soil moisture assessment, and further research to reline this technique is recommended.     

Effect of surfactants on solubilization and degradation of phenanthrene under thermophilic conditions

The bioavailability and biodegradation of polycyclic aromatic hydrocarbons (PAHs) can be increased through the addition of surfactants. Previous studies of this nature have been conducted under mesophilic conditions. Hence, the aim of the present study was to investigate the effects of synthetic surfactants and biosurfactants on solubilization and degradation of phenanthrene (PHE) in a series of batch solution experiments under thermophilic conditions. Tween 80, Triton X-100, and biosurfactants produced from Pseudomonas aeruginosa strain P-CG3 (P-CG3) and Pseudomonas aeruginosa ATCC 9027 (P. 9027) were used in this study. Surfactants effectively enhanced the solubility of PHE at 50 degrees C and the biosurfactant from P-CG3 was most effective with a 28-fold increase in apparent solubility of PHE at a concentration of 10 x critical micelle concentration (CMC) compared with the controls. However, addition of synthetic surfactants or biosurfactants inhibited the biodegradation of PHE in mineral salts medium by an isolate Bacillus sp. B-UM. Degradation of PHE diminished with increasing surfactant concentrations, and PHE degradation was completely inhibited for all the surfactants tested when the concentrations were greater than their respective CMC. The growth test suggested that Tween 80 and biosurfactants were degradable, but preferential utilization of these surfactants as substrates was not the mechanism for explaining the inhibition of PHE biodegradation. Because of the hydrophobic property of B-UM, degradation inhibition of PHE by surfactants was probably due to the reduction of direct contact between bacterial cells and PHE.     

Current issues and uncertainties in the measurement and modelling of air-vegetation exchange and within-plant processing of POPs

Air-vegetation exchange of POPs is an important process controlling the entry of POPs into terrestrial food chains, and may also have a significant effect on the global movement of these compounds. Many factors affect the air-vegetation transfer including: the physicochemical properties of the compounds of interest; environmental factors such as temperature, wind speed, humidity and light conditions; and plant characteristics such as functional type, leaf surface area, cuticular structure, and leaf longevity. The purpose of this review is to quantify the effects these differences might have on air/plant exchange of POPs, and to point out the major gaps in the knowledge of this subject that require further research. Uptake mechanisms are complicated, with the role of each factor in controlling partitioning, fate and behaviour process still not fully understood. Consequently, current models of air-vegetation exchange do not incorporate variability in these factors, with the exception of temperature. These models instead rely on using average values for a number of environmental factors (e.g. plant lipid content, surface area), ignoring the large variations in these values. The available models suggest that boundary layer conductance is of key importance in the uptake of POPs, although large uncertainties in the cuticular pathway prevents confirmation of this with any degree of certainty, and experimental data seems to show plant-side resistance to be important. Models are usually based on the assumption that POP uptake occurs through the lipophilic cuticle which covers aerial surfaces of plants. However, some authors have recently attached greater importance to the stomatal route of entry into the leaf for gas phase compounds. There is a need for greater mechanistic understanding of air-plant exchange and the 'scaling' of factors affecting it. The review also suggests a number of key variables that researchers should measure in their experiments to allow comparisons to be made between studies in order to improve our understanding of what causes any differences in measured data between sites.     

Sulfur polymer solidification/stabilization of elemental mercury waste

Elemental mercury, contaminated with radionuclides, presents a waste disposal problem throughout the Department of Energy complex. In this paper we describe a new process to immobilize elemental mercury wastes, including those contaminated with radionuclides, in a form that is non-dispersible, will meet EPA leaching criteria, and has low mercury vapor pressure. In this stabilization and solidification process, elemental mercury is combined with an excess of powdered sulfur polymer cement (SPC) and sulfide additives in a mixing vessel and heated to approximately 40 degrees C for several hours, until all of the mercury is converted into mercuric sulfide (HgS). Additional SPC is then added and the temperature of the mixture raised to 135 degrees C, resulting in a molten liquid which is poured into a mold where it cools and solidifies. The final treated waste was characterized by powder X-ray diffraction and found to be a mixture of the hexagonal and orthorhombic forms of mercuric sulfide. The Toxicity Characteristic Leaching Procedure was used to assess mercury releases, which for the optimized process averaged 25.8 microg/l, with some samples being well below the new EPA Universal Treatment Standard of 25 microg/l. Longer term leach tests were also conducted, indicating that the leaching process was dominated by diffusion. Values for the effective diffusion coefficient averaged 7.6x10(-18) cm2/s. Concentrations of mercury vapor from treated waste in equilibrium static headspace tests averaged 0.6 mg/m3.     

Using fiber optics to detect moisture intrusion into a landfill cap consisting of a vegetative soil barrier

The intrusion of moisture into landfills can pose a health hazard because of the possibility that the moisture will carry harmful substances into the groundwater. Early detection of moisture anywhere within these landfills is essential if corrective action is to be taken well before an occurrence of this kind. This paper presents the results of a field-scale simulation test of the use of fiber optics to detect the presence of moisture within landfill covers, using a detection method based on the thermal response of soils as a function of their moisture content. By sending electrical current through an embedded stainless-steel tube, soils of varying moisture content were heated and time-dependent temperature measurements were obtained with a fiber-optic distributed temperature sensor system. The optical fiber itself lay within the tube, but its temperature was a function of how rapidly heat was conducted into the surrounding medium. The results of this experiment, which are in agreement with those obtained using more traditional "point" sampling and laboratory analysis, are presented along with the strengths and limitations of the thermal-response method of detecting moisture.     

Cadmium content of wheat grain from a long-term field experiment with sewage sludge

Grain Cd concentrations were determined in the wheat (Triticum aestivum L.) cultivars Soissons, Brigadier, and Hereward grown in 1994,1996, and 1999, respectively, in soils of a long-term field experiment to which sewage sludges contaminated with Zn, Cu, Ni, or Cr had previously been added. Soil pore water soluble Cd and free Cd2+ increased linearly with increasing total soil Cd (R2=0.82 and 0.84, respectively; P<0.001). Similarly, soil pore water free Cd2+ increased linearly with increasing soil pore water soluble Cd (R2=0.98; P<0.001). There was no evidence of a plateau in soil pore water Cd concentrations with increasing soil Cd concentrations. Grain Cd concentrations were significantly correlated with total soil Cd (P<0.001), soil pore water Cd (P<0.001), and free Cd2+ (P<0.001). A slight curvilinear relationship between grain Cd and soil Cd was apparent, but there was no plateau, even at the maximum soil Cd concentration of about 2.7 mg kg(-1). The relationship between soil pore water Cd and grain Cd was linear for all three cultivars. The slopes were in the order 1994 > 1996 > 1999, with more Cd being taken up into the grain by Soissons grown in 1994, and least by Hereward grown in 1999. For Soissons, Cd concentration in the grain greater than the EU limit (0.24 mg kg(-1) dry wt.) occurred at soil Cd less than the current UK limit of 3 mg kg(-1) for soils receiving sewage sludge. In contrast, for Brigadier and Hereward, grain Cd concentrations were near to and less than the EU limit, respectively, at soil Cd concentrations of 3 mg kg(-1).