Influence of Geoengineered Climate on the Terrestrial Biosphere

Various geoengineering schemes have been proposed to counteract anthropogenically induced climate change. In a previous study, it was suggested that a 1.8% reduction in solar radiation incident on the Earths surface could noticeably reduce regional and seasonal climate change from increased atmospheric carbon dioxide (CO₂). However, the response of the terrestrial biosphere to reduced solar radiation in a CO₂-rich climate was not investigated. In this study, we hypothesized that a reduction in incident solar radiation in a Doubled CO₂ atmosphere will diminish the net primary productivity (NPP) of terrestrial ecosystems, potentially accelerating the accumulation of CO₂ in the atmosphere. We used a dynamic global ecosystem model, the Integrated Biosphere Simulator (IBIS), to investigate this hypothesis in an unperturbed climatology. While this simplified modeling framework effectively separated the influence of CO₂ and sunlight on the terrestrial biosphere, it did not consider the complex feedbacks within the Earths climate system. Our analysis indicated that compared to a Doubled CO₂ scenario, reduction in incident solar radiation by 1.8% in a double CO₂ world will have negligible impact on the NPP of terrestrial ecosystems. There were, however, spatial variations in the response of NPP-engineered solar radiation. While productivity decreased by less than 2% in the tropical and boreal forests as hypothesized, it increased by a similar percentage in the temperate deciduous forests and grasslands. This increase in productivity was attributed to a 1% reduction in evapotranspiration in the Geoengineered scenario relative to the Doubled CO₂ scenario. Our initial hypothesis was rejected because of unanticipated effects of engineered solar radiation on the hydrologic cycle. However, any geoengineering approaches that reduce incident solar radiation need to be thoroughly analyzed in view of the implications on ecosystem productivity and the hydrologic cycle.     

A novel sex-specific and inducible monoterpene synthase activity associated with a pine bark beetle,the pine engraver,<Emphasis Type="Italic"> Ips pini</Emphasis>

Ecological interactions of conifers and coniferophagous bark beetles are determined in part by terpenoids (isoprenoids), which are major defense metabolites of conifer oleoresin. Curiously, similar compounds are important aggregation pheromones of conifer-attacking bark beetles. Terpene synthases are responsible for generating the enormous variety of terpenoid carbon skeletons found in nature. These catalysts convert short-chain prenyl diphosphates to a diverse assortment of hemiterpene, monoterpene, sesquiterpene, and diterpene natural products. While terpene synthases have frequently been characterized from plant and microbial sources, they have not yet been described in animals. Here we report the discovery of a monoterpene synthase activity in an insect, the pine engraver, Ips pini (Say) (Coleoptera: Scolytidae). Cell-free assays of I. pini revealed that geranyl diphosphate (GDP) is converted to the acyclic monoterpene myrcene in whole-body extracts from males, but not females. Furthermore, the monoterpene synthase activity in males can be induced by prior treatment with juvenile hormone III (JH III) or by feeding on phloem from the host trees, Jeffrey pine (Pinus jeffreyi Grev. &; Balf.) or red pine (Pinus resinosa Ait.). The sex-specificity and endocrine induction of this activity argue for its involvement in the biosynthesis of monoterpenoid pheromones mediated by enzymes from insect tissue. This discovery is the first example of a monoterpene synthase in the Metazoa and evokes exciting new questions about the origin, evolution, and occurrence of terpene synthases.     

Procedures for ensuring community involvement in multijurisdictional river basins: a comparison of the Murray-Darling and Mekong river basins

Community involvement is fundamental to the management of multijurisdictional river basins but, in practice, is very difficult to achieve. The Murray-Darling basin, in Australia, and the Mekong River basin in Southeast Asia are both cooperatively managed multijurisdictional river basins where the management authorities have expressed an aim of community involvement. In the Murray-Darling basin vigorous efforts have promoted a culture of community consultation throughout each of the state jurisdictions involved, although true participation has not necessarily been achieved. In the Mekong basin the community is much more diverse and the successes so far have been largely at the local level, involving action in subsections of the basin. These case studies suggest that community involvement in the form of community consultation across large multijurisdictional river basins is achievable, but more comprehensive participation is not necessarily possible.     

A forest and paper industry report comparing leading companies' key policy and expenditure issues

Environmental Information Services, Inc. (EIS) publishes detailed reports and offers custom research related to the full spectrum of environmental issues facing corporations. In this new article, EIS reports on the environmental performance, policies, and expenditures of the largest companies in the paper industry, focusing on toxic waste management, and a variety of key policy and expenditure issues. It is important to note that the following article does not contain data on hazardous waste management, penalties, spills, and Superfund sites. This, as well as additional policy and expenditure data, can be obtained from EIS. EIS reports help companies of all sizes benchmark their environmental performance and quality improvement efforts.     

Highlights from a new petroleum industry report benchmarking performance,policies, and expenditures

Environmental Information Services, Inc. (EIS) publishes detailed reports and offers custom research related to the full spectrum of environmental issues facing corporations. This article highlights several key sections from EIS's new 1998 Petroleum Industry Report. It details the environmental performance, policies, and expenditures of the largest companies in the petroleum industry. EIS industry reports contain data on five key performance criteria—toxic waste management, hazardous waste generation, penalties, spills, and Superfund sites. Here we examine one of those—penalties—and the policies of the three largest companies. In the full report, which can be obtained from EIS, 15 corporations are analyzed based on all the performance criteria.     

Benchmarking compliance performance: A new petroleum industry report

Environmental Information Services, Inc. (EIS) publishes detailed reports and offers custom research related to the full spectrum of environmental issues facing corporations. In this new article, EIS reports on the compliance performance of the largest companies in the petroleum industry focusing on five key environmental concerns: toxic waste management, air pollution, water pollution, spills, and Superfund. It is important to note that the following article does not contain normalized data and graphs which would adjust findings to various size features (e.g., worldwide revenues per company). This as well as detailed environmental policy and program data on each company can be obtained from EIS. EIS reports help companies of all sizes benchmark their environmental performance and quality improvement efforts.     

Benchmarking and environmental trend indicators

Companies are increasingly incorporating quantitative environmental data in their benchmarking activities as the search for ways to improve corporate environmental performance continues to expand. The Investor Responsibility Research Center supplies time series data to support several benchmarking activities. This article introduces two new trend indicators that may be used for certain environmental benchmarking applications.     

Revised emergency vacuum relief device sizing for atmospheric distillation systems

Conventional vacuum relief methodologies are usually protective responses; that is, they accomplish their purpose by substitution of an inert gas (usually nitrogen) for the process gases removed by an external vacuum source, or for condensable vapour collapsed by an internal process mechanism (e.g. condensation). While this approach is theoretically possible for all potential vacuum scenarios, it becomes practically impossible to implement for installations where a rapid phase change can impart near-instantaneous system pressure reductions. The procedure outlined in this paper takes a preventive approach: eliminate the source of vacuum generation before the safe lower system pressure limit is reached. For distillation and other refluxing systems, this vacuum source is usually the main overhead condenser, which is designed to collapse large volumes of condensable vapour. To eliminate the vacuum source requires elimination of the system's ability to rapidly condense vapour. This goal is accomplished by introduction of inert gas directly into the condensing system to ‘blanket’ the heat transfer surface and stop condensation. The procedure determines the rate, amount and location for introduction of inert gas. The required design data include: (i) system starting pressure, (ii) maximum allowable system vacuum, (iii) volume of the condensing system, and (iv) normal system condensing rate. By determining the rate at which the condenser removes vapour volume from the system, and designing an inert gas delivery system to meet or exceed this rate, the vacuum generation potential of the system is effectively eliminated using a much smaller quantity of inert gas than with the more traditional volume substitution methods.     

Nonpoint source pollution risk assessment in a watershed context

Nonpoint source pollution control requires assessment of the influence of dispersed runoff-contributing areas on downstream water quality. This evaluation must consider two separate phases: site-to-stream loading and downstream fluvial transport. Any model, combination of models, or procedure for making this assessment can be generalized to a simple spatial model or framework, which considers runoff or pollutant loading per unit area and down-stream attenuation, with drainage area as a scaling factor. This spatial model has a probabilistic interpretation and can be used in conjunction with a standard dilution model to give a probabilistic estimate of the impacts at the basin mouth of runoff from a specific upstream contributing area. It is illustrated by applying it to an assessment of the probability that various copper concentrations at the mouth of the urbanized South Platte River basin in Denver, Colorado, USA, will be exceeded as a result of runoff from a subbasin within the city. Determining the probability that a concentration of a pollutant at the basin mouth can be attributed to runoff from a discrete area within the basin is useful for targeting and risk assessment because it enables quantitative risk-based comparisons. The spatial framework is also useful for evaluating management and control options, since actions within the basin can be directly linked to water quality at a downstream point.     

Community and individual reaction to environmental hazards: Developing a measurement technology

This study was an attempt to develop an efficient method of monitoring and assessing how members of a community react to a toxic hazard in their community. The intent was to develop a short instrument which could be applied in multiple settings, or in the same setting several times. The methodology was a short questionnaire that addressed six issues: sources of information about the hazard, beliefs about justice and responsibility, beliefs about why the hazard is a problem, extent of active concern, involvement in community affairs, and satisfaction with life. A mailed questionnaire was developed and tested in a community near an EPA Superfund site in the United States. Results of the effort are discussed relative to the particular community studied, and relative to furthering the assessment technology begun in this research.