Assessment of acid leachable trace metals in sediment cores from River Uppanar, Cuddalore, Southeast coast of India

An acid leachable technique is employed in core samples (C1, C2 and C3) to develop a baseline data on the sediment quality for trace metals of River Uppanar, Cuddalore, southeast coast of India. Acid leachable metals (Fe, Mn, Cr, Cu, Ni, Co, Pb, Zn and Cd) indicate peak values at the sulphidic phase and enrichment of metals in the surface layers are due to the anthropogenic activities. Association of trace metals with Fe, Mn indicates their adsorption onto Fe-Mn oxyhydroxides and their correlation with S indicate that they are precipitated as metal sulphides. Factor analysis identified three possible types of geochemical associations and the supremacy of trace metals along with Fe, Mn, S and mud supports their geochemical associations. Factor analysis also signifies that anthropogenic activities have affected both the estuarine and fresh water regions of River Uppanar.     

Ecotoxicological effect of grounded MV River Princess on the intertidal benthic organisms off Goa

The ecotoxicological effects of oil spill from the grounded vessel MV River Princess on the intertidal benthic organisms of Sinquerim-Candolim beach at Goa were investigated. An intertidal expanse of 1 km on either side of the grounded vessel was selected to evaluate the concentration of total petroleum hydrocarbon (TPH) in the sediment and its effects on the composition, abundance and diversity of micro-, meio- and macrobenthos. TPH in the intertidal sediment ranged from 7.8 to 89 microg g(-1) (mean 35.44+/-26.35 SD). Microbenthos comprised of microalgae, protozoans and juvenile forms of meiobenthos. Apart from juvenile nematodes, which were abundant, Coscinodiscus spp., Navicula spp., and Nitzschia spp. representing microalgae were also observed in microbenthic samples. Meiobenthos was represented by 13 taxa and their total density ranged between 92 and 1057 nos. 10 cm(-2). Maximum meiobenthic abundance of 1057 nos. 10 cm(-2) was observed at Sinquerim. Nematodes were the dominant meiobenthic taxa followed by turbellarians and harpacticoid copepods. The macrobenthos was numerically dominated by polychaetes, followed by crustaceans whereas bivalve molluscs were less represented. There was substantial increase in the petroleum concentration in the beach sediment compared to the previously reported values and highest TPH (89 microg g(-1) sediment) values were in the vicinity of the grounded vessel. The polychaete/amphipod ratio and cumulative and partial dominance abundance-biomass curves showed significant negative impact of TPH on macrofauna. The benthic community structure also showed measurable changes, as there was significant decrease (60%) in the number of species. Given that the microalgal counts were low in sediment, it is assumed that the intertidal meiofauna was possibly using oil-degrading bacteria as alternate food source. In conclusion, the results reported here suggest that the grounded ore carrier is not only detrimental to the beach community, that may take longer time for recovery, but also affects the beach morphology which may have long-term impact on local fishery.     

Joint analysis of process and operator performance in chemical process operational safety

Independent studies of case histories by the Health and Safety Commission in the UK and by a Honeywell led industrial consortium world-wide showed that human errors represent the major cause of failure in process plant operation. In contrast to this discovery the majority of previous studies on computer aided systems for fault detection and diagnosis has focused on the process side. This paper presents a methodology, which can involve human factors into the development of systems for automatic identification and diagnosis of abnormal operations and develops methods and techniques that can be used to simultaneously capture, characterise and assess the performance of operators as well as of the process. A joint process–operator simulation platform is developed which is used as a test-bed for carrying out the study. The process part is a simulator, which simulates in high fidelity the dynamic behaviour of the process that is subject to the influence of various disturbances and operators’ interventions. The operator module is developed as a real-time expert system, which emulates operator’s behaviour in interpretation of received signals, and planning and execution of decisions. The interaction between the two modules is managed through an interaction module, which handles the real-time exchange of data using Dynamic Data Exchange. The interaction module also contains the toolkits for analysing the dynamic behaviour of the joint process–operator system. The method and system are illustrated using a simulated case study.     

Experimental assessment on the moving capabilities of mobility-impaired disabled

To take into account reasonably the safety requirements of the disabled on emergency evacuation in the design, usage, management and emergency response of public places, the authors of this paper organized on-site experiments for 100 disabled individuals (40 people with no supporting tools, 20 people using a single crutch and 40 people two crutches) and 17 healthy people at a subway station in Beijing. The experiments were designed to measure the unimpeded free walking speed of the participants during horizontal and stair ascending/descending movement, and to assess the possible impact of passage width on movement speed. Based on the results of the tests, the authors systematically analyzed the speed variation patterns with disability grade, gender and passage width. The validity of the value of an important parameter for evacuation safety design in the prescribed fire codes in mainland China, the width of a single stream of people, is assessed. Finally the results of the experiments are compared with that from other researches to identify the similarities and differences between them.     

Validity and reliability of a job factors questionnaire related to the work tasks of physical therapists

Physical therapists engage in work tasks that expose them to occupational risk factors related to musculoskeletal disorders. Due to the gap in the literature on instruments focused on those workers, this study adapted a job factors questionnaire to physical therapists, and assessed its psychometric properties. The questionnaire was adapted and its content validity was established. The psychometric properties were evaluated among 142 physical therapists. Reliability was verified using the temporal-stability design and internal consistency. Construct validity was assessed with the known-groups technique. Test-retest results demonstrated intraclass correlation coefficients between .82 and .90 (p < .001). Cronbach's α of .91 verified the reliability of the questionnaire. The known-groups technique demonstrated a statistically significant difference on the scores of the items when physical therapists were compared to office workers. The results indicated that the adapted questionnaire had acceptable psychometric properties for assessing problematic job factors among physical therapists working in hospitals.     

Diverging response patterns of terrestrial and aquatic species to hydromorphological restoration

Although experiences with ecological restoration continue to accumulate, the effectiveness of restoration for biota remains debated. We complemented a traditional taxonomic analysis approach with information on 56 species traits to uncover the responses of 3 aquatic (fish, macroinvertebrates, macrophytes) and 2 terrestrial (carabid beetles, floodplain vegetation) biotic groups to 43 hydromorphological river restoration projects in Germany. All taxonomic groups responded positively to restoration, as shown by increased taxonomic richness (10–164%) and trait diversity (habitat, dispersal and mobility, size, form, life history, and feeding groups) (15–120%). Responses, however, were stronger for terrestrial than aquatic biota, and, contrary to our expectation, taxonomic responses were stronger than those of traits. Nevertheless, trait analysis provided mechanistic insights into the drivers of community change following restoration. Trait analysis for terrestrial biota indicated restoration success was likely enhanced by lateral connectivity and reestablishment of dynamic processes in the floodplain. The weaker response of aquatic biota suggests recovery was hindered by the persistence of stressors in the aquatic environment, such as degraded water quality, dispersal constraints, and insufficient hydromorphological change. Therefore, river restoration requires combined local- and regional-scale approaches to maximize the response of both aquatic and terrestrial organisms. Due to the contrasting responses of aquatic and terrestrial biota, the planning and assessment of river restoration outcomes should consider effects on both components of riverine landscapes.     

Preparation of Porous Nanofibers from Electrospun Polyacrylonitrile/Polyvinylidene Fluoride Composite Nanofibers by Inexpensive Salt Using for Dye Adsorption

The high surface area of porous nanofibers enhances their performance for many applications. The present study investigated electrospinning and dye adsorption properties of polymeric nanofibers which were porous by various types of salts. The salt/polyacrylonitrile/polyvinylidene fluoride composite nanofibers were electrospun, and the inexpensive salts such as sodium chloride (NaCl), sodium bicarbonate (NaHCO₃), or calcium chloride (CaCl₂) was used to manufacture the porous fibers. Subsequently, the salt was removed by a selective dissolution, and salt extraction of nanofibers was performed with the solution of hydrochloric acid (10 wt%). Salt/PVDF/PAN and porous PVDF/PAN composite nanofibers have been applied to dye adsorption of solution. The characteristics of nanofibers were studied by Fourier transform infrared microscopy (FTIR) and scanning electron microscopy (SEM) analysis. FTIR showed that the salt was extracted from PVDF/PAN nanofibers successfully, and SEM indicated that many pores were aligned with the nanofibers. The adsorption capacity of salt nanofibers webs and porous nanofibers webs for Basic Blue 41 were compared with each other, and porous fibers were obtained from NaHCO₃ having the highest dye adsorption value. Adsorption of dyes follows the Langmuir isotherm and pseudo-second order kinetics.     

Salinity modulates biochemical and histopathological changes caused by silver nanoparticles in juvenile Persian sturgeon (Acipenser persicus)

Environmental Science and Pollution Research - The objective of this study was to evaluate the effect of salinity on the acute and sub-chronic toxicity of silver nanoparticles (AgNPs) in Persian...