Spatial distribution of trace elements in surface sediments of Hooghly (Ganges) river estuary in West Bengal,India

The spatial distribution of trace elements in surface sediments of the Hooghly estuary was studied over the monsoons in 2014–2017. As, Cd, Ni, Pb and U were two- to sixteen-fold the crust means with increasing levels toward the estuary, with Ni peak during the post-monsoon. Pearson’s correlation matrix, cluster analysis, enrichment factors and pollution index revealed the anthropic source and association of trace elements with Fe, Mn and Al and of Pb with U. Geoaccumulation index revealed for Ni an extremely contaminated situation at the estuary water during monsoon and for Cd a heavily contaminated situation at freshwater location. The potential contamination index was >6; thus, sediments were very severely contaminated by As, Cd and Ni with worst situation for As and Cd at fresh and brackish water and during post-monsoon. The overall ecological risk was severe, 300≤RI<600 at all sites and seasons, especially after the monsoon, at fluvial and brackish locations.

     

Consumptive and nonconsumptive effects of predators on metacommunities of competing prey

Although predators affect prey both via consumption and by changing prey migration behavior, the interplay between these two effects is rarely incorporated into spatial models of predator-prey dynamics and competition among prey. We develop a model where generalist predators have consumptive effects (i.e., altering the likelihood of local prey extinction) as well as nonconsumptive effects (altering the likelihood of colonization) on spatially separated prey populations (metapopulations). We then extend this model to explore the effects of predators on competition among prey. We find that generalist predators can promote persistence of prey metapopulations by promoting prey colonization, but predators can also hasten system-wide extinction by either increasing local extinction or reducing prey migration. By altering rates of prey migration, predators in one location can exert remote control over prey dynamics in another location via predator-mediated changes in prey flux. Thus, the effect of predators may extend well beyond the proportion of patches they visit. In the context of prey metacommunities, predator-mediated shifts in prey migration and mortality can shift the competition-colonization trade-off among competing prey, leading to changes in the prey community as well as changes in the susceptibility of prey species to habitat loss. Consequently, native prey communities may be susceptible to invasion not only by exotic prey species that experience reduced amounts of mortality from resident predators, but also by exotic prey species that exhibit strong dispersal in response to generalist native predators. Ultimately, our work suggests that the consumptive and nonconsumptive effects of generalist predators may have strong, yet potentially cryptic, effects on competing prey capable of mediating coexistence, fostering invasion, and interacting with anthropogenic habitat alteration.     

Assessing the impact of biological control of Plutella xylostella through the application of Lotka–Volterra model

The Lotka–Volterra model was applied to the population densities of diamondback moth (DBM), Plutella xylostella (L.) and its exotic larval parasitoid Diadegma semiclausum (Hellen) data that was collected earlier by icipe's DBM biological control team. The collections were done for 15 months before the release and 36 months after release of the parasitoid in two areas; in Werugha, Coast Province of Kenya and Tharuni, Central Province of Kenya, respectively. For each area in pre- and post-release periods, we estimated Lotka–Volterra model parameters from the minimization of the loss function between the theoretical and experimental time-series datasets following the Nelder-Mead multidimensional method. The model estimated a reduction in the value of the steady state of DBM population from 4.86 to 2.17 in Werugha and from 6.11 to 3.76 and 3.45 (with and without exclusion of the time before D. semiclausum recovery) in Tharuni when transiting from the pre- and post-release periods, respectively. This change was a consequence of the newly introduced parasitoid, in the areas. The study presented a successful and detailed technique for non-linear model parameters restoration which was demonstrated by the correct mimicking of empirical datasets from the classical biological control with D. semiclausum, in different areas of Kenya. The applied model has measured the parasitoids impact on the DBM biological control through a quantitative estimate of the effectiveness of the newly introduced species D. semiclausum. These equations may therefore be used as tool for decision making in the implementation for such pests’ management system strategy.     

Male mating preference is associated with risk of pre-copulatory cannibalism in a socially polymorphic spider

We performed male attraction experiments and staged courtship sequences to test for non-random mating with respect to social behavioral phenotype in the comb-footed spider, Anelosimus studiosus. While asocial behavior is the dominant phenotype in all A. studiosus populations examined to date, a social phenotype approaches a frequency of 15% in colder environments. We collected test subjects from higher latitude polymorphic populations and scored all individuals as to their behavioral phenotype prior to their use in these trials. Males of both phenotypes differentially approached and courted social females over asocial females and no-spider controls. By offering males different numbers of females of one type vs. the other in subsequent trials, we determined that the difference in attractiveness between the two phenotypes social/asocial is 1.5/1. Both the web produced by a female and a female that has been removed from its web attract males. We suggest that the male attracting pheromone is present on females and is also attached to silk threads. Staged encounters completed between males and females of the respective phenotypes demonstrated that courting males suffer significantly less pre-copulatory sexual cannibalism with social females than with asocial ones, and thus, female social tendency is phenotypically linked to sexual aggression. We propose that the male preference for social females is adaptive because of the observed asymmetry in courtship success.     

Reproductive status influences group size and persistence of bonds in male plains zebra (<Emphasis Type="Italic">Equus burchelli</Emphasis>)

Animal groups arise from individuals’ choices about the number, characteristics, and identity of associates. Individuals make these choices to gain benefits from their associations. As the needs of an individual change with its phenotype, so too we expect the nature of its associations to vary. In this paper, we investigate how the social priorities of male plains zebra (Equus burchelli) depend on reproductive state. An adult male is either a bachelor, and lacking mating access, or a stallion defending a harem. Multiple harems and bachelor males aggregate in larger herds. Herds frequently split and merge, affording males opportunities to change associates. Over a 4-year period, we sampled the herd associations in a population of 500–700 zebras. To isolate the effects of reproductive state on male social behavior, we account for potential confounding factors: changes in population size, grouping tendencies, and sampling intensity. We develop a generally applicable permutation procedure, which allows us to test the null hypothesis that social behavior is independent of male status. Averaging over all individuals in the population, we find that a typical bachelor is found in herds containing significantly more adults, bachelors, and stallions than the herds of a typical stallion. Further, bachelors’ bonds with each other are more persistent over time than those among stallions. These results suggest that bachelors form cohesive cliques, in which we may expect cooperative behaviors to develop. Stallion–stallion associations are more diffuse, and less conducive to long-term cooperation. This contribution is part of the special issue “Social Networks: new perspectives” (Guest Editors: J. Krause, D. Lusseau and R. James).     

Soil erosion hazard evaluation—An integrated use of remote sensing,GIS and statistical approaches with biophysical parameters towards management strategies

Soil erosion hazard maps can be an essential tool in erosion prone areas as they explain and display the distribution of hazards and areas likely to be affected to different magnitudes. Therefore, it is very useful to planners and policy makers initiating remedial measures and for prioritizing areas. In this study, a numerical model was developed for soil erosion hazard assessment, in which Z-score analysis was combined with a geographical information system (GIS) to compute a synthetic soil erosion hazard index (SEHI). For this model, nine factors which have notable impact on soil erosion were selected. To generate the selected factors remote sensing, analytical hierarchy process (AHP) and GIS techniques along with spatial models were applied. To standardize all of the factors and establish the factor weights, the AHP method was adopted. For Z-score analysis with selected standardized factors, the Integrated Land and Water Information System (ILWIS) software was used and nine individual layers with Z-scores were prepared. Afterwards, the layers were integrated with their factor weights by means of a weighted linear combination to derive a SEHI value for each pixel. To classify the discrete SEHI map to represent a meaningful regionalization of soil erosion hazard, the equal distance cluster principle was used and graded into four levels of hazard; very high, high, moderate and low. The results depicted that in general, a moderate hazardous condition of soil erosion was found in the study area and the proposed approach was also able to identify the areas under high and very high hazards that require urgent intervention on a priority basis. Based on this study, comprehensive erosion hazard management strategies were anticipated for the efficient management of present and future erosion disaster in the area.     

Evaluation of discrete host–parasitoid models for diamondback moth and Diadegma semiclausum field time population density series

The performance of discrete mathematical models to describe the population dynamics of diamondback moth (DBM) (Plutella xylostella L.) and its parasitoid Diadegma semiclausum was investigated. The parameter values for several well-known models (Nicholson–Bailey, Hassell and Varley, Beddington, Free and Lawton, May, Holling type 2, 3 and Getz and Mills functional responses) were estimated. The models were tested on 20 consecutive sets of time series data collected at 14 days interval for pest and parasitoid populations obtained from a highland cabbage growing area in eastern Kenya. Model parameters were estimated from minimized squared difference between the numerical solution of the model equations and the empirical data using Powell's method. Maximum calculated DBM growth rates varied between 0.02 and 0.07. The carrying capacity determined at 16.5 DBM/plant by the Beddington et al. model was within the range of field data. However, all the estimated parameter values relating to the parasitoid, including the instantaneous searching rate (0.07–0.28), per capita searching efficiency (0.20–0.27), search time (5.20–5.33), handling time (0.77–0.90), and parasitism aggregation index (0.33), were well outside the range encountered empirically. All models evaluated for DBM under Durbin–Watson criteria, except the May model, were not autocorrelated with respect to residuals. In contrast, the criteria applied to the parasitoid residuals showed strong autocorrelations. Thus, these models failed to estimate parasitoid dynamics. We conclude that the interactions of the DBM with its parasitoid cannot be explained by any of the models tested. Two factors may be associated with this failure. First, the parasitoid in this integrated biological control system may not be playing a major role in regulating DBM population. Second, and perhaps more likely, poor correlations reflect gross inadequacies in the theoretical assumptions that underlie the existing models.     

Medical geochemistry research in Spišsko-Gemerské rudohorie Mts., Slovakia

This study presents an assessment of the potential impact of geological contamination of the environment on the health of the population in Spišsko-Gemerské rudohorie Mts. (SGR Mts.). The concentration levels of potentially toxic elements (mainly As, Cd, Cu, Hg, Pb, Sb, and Zn) were determined in soils, groundwater, surface water, and stream sediments as well as in the food chain (locally grown vegetables). A medical study included some 30 health indicators for all 98 municipalities of the study area. The As and Sb contents in human fluids and tissues were analyzed in one municipality identified to be at the highest risk. Based on element content, environmental and health risks were calculated for respective municipalities. Out of 98 municipalities 14 were characterized with extremely high environmental risk and 10 were characterized with very high carcinogenic risk from arsenic (groundwater). Extensive statistical analysis of geochemical data (element contents in soils, groundwater, surface water, and stream sediments) and health indicators was performed. Significant correlations between element contents in the geological environment and health indicators, mainly cancer and cardiovascular diseases, were identified. Biological monitoring has confirmed the transfer of elements from the geological environment to human fluids and tissues as well as to the local food chain.     

Protection of the vehicle cab environment against bacteria, fungi and endotoxins in composting facilities

Microbial quality of air inside vehicle cabs is a major occupational health risk management issue in composting facilities. Large differences and discrepancies in protection factors between vehicles and between biological agents have been reported. This study aimed at estimating the mean protection efficiency of the vehicle cab environment against bioaerosols with higher precision. In-cab measurement results were also analysed to ascertain whether or not these protection systems reduce workers' exposure to tolerable levels. Five front-end loaders, one mobile mixer and two agricultural tractors pulling windrow turners were investigated. Four vehicles were fitted with a pressurisation and high efficiency particulate air (HEPA) filtration system. The four others were only equipped with pleated paper filter without pressurisation. Bacteria, fungi and endotoxins were measured in 72 pairs of air samples, simultaneously collected inside the cab and on the outside of the cab with a CIP 10-M sampler. A front-end loader, purchased a few weeks previously, fitted with a pressurisation and high efficiency particulate air (HEPA) filtration system, and with a clean cab, exhibited a mean protection efficiency of between 99.47% CI 95% [98.58-99.97%] and 99.91% [99.78-99.98%] depending on the biological agent. It is likely that the lower protection efficiency demonstrated in other vehicles was caused by penetration through the only moderately efficient filters, by the absence of pressurisation, by leakage in the filter-sealing system, and by re-suspension of particles which accumulated in dirty cabs. Mean protection efficiency in regards to bacteria and endotoxins ranged between 92.64% [81.87-97.89%] and 98.61% [97.41-99.38%], and between 92.68% [88.11-96.08%] and 98.43% [97.44-99.22%], respectively. The mean protection efficiency was the lowest when confronted with fungal spores, from 59.76% [4.19-90.75%] to 94.71% [91.07-97.37%]. The probability that in-cab exposure to fungi exceeded the benchmark value for short-term respiratory effects suggests that front-end loaders and mobile mixers in composting facilities should be fitted with a pressurisation and HEPA filtration system, regardless of whether or not the facility is indoors or outdoors. Regarding the tractors, exposure inside the cabs was not significantly reduced. However, in this study, there was a less than 0.01% risk of exceeding the bench mark value associated with fungi related short-term respiratory effects during an 1-h per day windrow turning operation. Pressurisation and a HEPA filtration system can provide safe working conditions inside loaders and mobile mixer with regard to airborne bacteria, fungi and endotoxins in composting facilities. However, regular thorough cleaning of the vehicle cab, as well as overalls and shoes cleaning, and mitigation of leakage in the filter-sealing system are necessary to achieve high levels of protection efficiency.     

Drained response of municipal solid waste in large-scale triaxial shear testing

A comprehensive laboratory investigation was performed on municipal solid waste (MSW) from a landfill located in northern California using a large-scale triaxial (TX) apparatus. An improved, standardized waste specimen preparation method was developed and used to prepare 27 large-scale TX specimens (d=300mm, h=600-630mm). The effects of waste composition, confining stress, unit weight, loading rate, and stress path on the drained stress-strain response of MSW were investigated. Waste composition has a significant effect on its stress-strain response. The commonly observed upward curvature of the stress-strain response of specimens composed of larger-sized waste materials results from the fibrous constituents (primarily paper, plastic and wood) reinforcing the waste matrix. This effect is greatest when the MSW specimen is sheared across the long axis of the fibrous particles. Due to this significant strain hardening effect and waste's in situ stress state, a limiting strain failure criterion of 5% axial strain from the K(o) field consolidation state is judged to be most appropriate. Results from this test program and data from the literature indicate that the TX compression secant friction angle of MSW varies from 34° to 44°, with 39° as a best estimate, at a confining stress of one atmosphere (assuming c=0). The friction angle decreases as confining stress increases. The friction angles measured in this testing program are representative of failure surfaces that are oriented at an angle to the predominant orientation of the long axis of the fibrous waste particles. These friction angles are higher than those obtained in direct shear tests where shearing typically occurs parallel to the orientation of the fibrous waste particles.