The Adsorption of Lead and Copper from Aqueous Solution on Modified Peat–Resin Particles

Raw peat was modified with sulfuric acid, then mixed modified with resin to prepare the modified peat–resin particles. Using the batch experimental systems, the removal of heavy metals (copper and lead) on the modified peat–resin particles was investigated. The data of the adsorption isotherm could be fitted by the Langmuir equation well. The adsorption rate of heavy metals on modified peat–resin particles was very swift. The removal processes of heavy metals on modified peat–resin particles could be well described by pseudo-second order model. The adsorption rate of lead was affected by the initial heavy metal concentration, initial pH, particle size, agitation speed and particle mass. In the adsorption of heavy metals (lead and copper) on the modified peat–resin particles, ion exchange was the major reaction mechanism. Desorption data showed that the lead adsorbed by modified peat–resin particle could be desorbed by 0.5 N or 1.0 N HNO₃. The desorption rate was swift. The experiments indicated that the modified peat–resin particles have great potential for the removal of heavy metals from wastewater.     

Effects of farmyard manure and chemical fertilizers on the nutritional status of the loquat trees

The nutritional status of the loquat trees was investigated using cattle manure and commercial fertilizers for three years. The farmyard manure increased N, P, K, Mg, Fe and Zn contents of the leaves. No significant difference was found between the fertilizer types for trunk growth. Yield efficiency was nearly doubled by application of farmyard manure. Fertilizers did not affect the weight and shape of the fruits; however, commercial fertilizers led the lower total acidity in fruits. It was concluded that the loquat trees grown in sandy soils could fulfill their principal nutrient requirements for growth and commercial yield with application of farmyard manure.     

A Model of Intertemporal Emission Trading, Banking, and Borrowing

This paper provides a general treatment of emission trading, banking, and borrowing in an intertemporal, continuous-time model. Using optimal-control theory, the decentralized behavior of firms is shown to lead to the least-cost solution attainable under joint-cost minimization. Explicit solutions for the time paths of emissions and permit prices are derived when firms are allowed to both bank and borrow and when firms are only allowed to bank emission permits. The policy implications of emission banking and borrowing are discussed.     

Cell-cell recognition system in gorgonians: description of the basic mechanism

A comparative investigation of the chemical composition of Thalassiosira antarctica var. antarctica vegetative and resting stages revealed C:N and C:chl a ratios to be lower in vegetative cells. These trends primarily reflect vegetative levels of C/cell below, and N/cell and chl a/cell levels above those of spores. There was a change in chemical composition with the initial formation of resting spores, and spores continued to modify their composition while maintained in a cyclic light/dark regime for about one and one half weeks. Most notable was a net increase in carbon and chlorophyll a per cell. Spores then subjected to darkness for over one week appeared to retain most of the carbon and chlorophyll a previously synthesized. These findings support the idea that resting spores enhance the survival capabilities of a species under adverse conditions.     

A new enzyme immunoassay for PCDD/F TEQ screening in environmental samples: comparison to micro-EROD assay and to chemical analysis.

A new Enzyme ImmunoAssay (EIA) for PCDD/F TEQ measurement in extracts of environmental samples was described. The bioassay TEQ which derived from EIA and EROD were compared with each other and with results from chemical analysis. For all environmental samples, the EROD-TEQ is higher than the value from chemical analysis. However, the EIA-TEQ is much more identical with the value from chemical analysis. Our results indicate that the EIA assay is a complementary method to the EROD assay and should be useful as a rapid and sensitive screening tool for environmental samples in many situations.     

Possible use of constructed wetland to remove selenocyanate,arsenic, and boron from electric utility wastewater

Wetland microcosms were used to evaluate the ability of constructed wetlands to remove extremely high concentrations of selenocyanate (SeCN-), arsenic (As), and boron (B) from wastewater generated by a coal gasification plant in Indiana. The wetland microcosms significantly reduced the concentrations of selenium (Se), As, B, and cyanide (CN) in the wastewater by 64%, 47%, 31%, and 30%, respectively. In terms of the mass of each contaminant, 79%, 67%, 57%, and 54% of the Se, As, B, and CN, respectively, loaded into the microcosms were removed from the wastewater. The primary sink for the retention of contaminants within the microcosms was the sediment, which accounted for 63%, 51%, and 36% of the Se, As, and B, respectively. Accumulation in plant tissues accounted for only 2-4%, while 3% of the Se was removed by biological volatilization to the atmosphere. Of the 14 plant species tested, cattail, Thalia, and rabbitfoot grass were highly tolerant of the contaminants and exhibited no growth retardation. Environmental toxicity testing with fathead minnow (Pimephales promelas) larvae confirmed that the water treated by the wetland microcosms was less toxic than untreated water. The data from the wetland microcosms support the view that constructed wetlands could be used to successfully reduce the toxicity of aqueous effluent contaminated with extremely high concentrations of SeCN-, As, and B, and that a pilot-scale wetland should therefore be constructed to test this in the field. Cattail, Thalia, and rabbitfoot grass would be suitable plant species to establish in such wetlands.     

Natural pollution caused by the extremely acidic crater lake Kawah Ijen, East Java, Indonesia

Background. Aims and Scope Lakes developing in volcano craters can become highly acidic through the influx of volcanic gases, yielding one of the chemically most extreme natural environments on earth. The Kawah Ijen crater lake in East Java (Indonesia) has a pH 〈 0.3. It is the source of the extremely acid and metal-polluted river Banyupahit (45 km). The lake has a significant impact on the river ecosystem as well as on a densely populated area downstream, where agricultural fields are irrigated with water with a pH between 2.5 and 3.5. The chemistry of the river water seemed to have changed over the past decade and the negative effect in the irrigation area increased. A multidisciplinary approach was used to investigate the altered situation and to get insight in the water chemistry and the hydrological processes influencing these alterations. Moreover, a first investigation of the effects of the low pH on ecosystem health and human health was performed. Methods Water samples were taken at different sites along the river and in the irrigation area. Sampling for macroinvertebrates was performed at the same sites. Samples of soil and crop were taken in the irrigation area. All samples were analysed for metals (using ICP-AES) and other elements, and concentrations were compared to local and international standards. Results and Discussion The river carries a very high load of SO4, NH4, PO4, Cl, F, Fe, Cu, Pb, Zn, Al and other potentially toxic elements. Precipitation and discharge data over the period of 1980 – 2000 clearly show that the precipitation on the Ijen plateau influences water chemistry of the downstream river. Metal concentrations in the river water exceed the concentrations mentioned in Indonesian and international quality guidelines, even in the downstream river and the irrigation area. Some metal concentrations are extremely high, especially iron (up to 1600 mg/l) and aluminium (up to 3000 mg/l). The food-webs in the acidic parts of the river are highly underdeveloped. No invertebrates were present in the extremely acid water and, at pH 2.3, only chironomids were found. This also holds true for the river water with pH 3.3 in the downstream area. Agricultural soils in the irrigation area have a pH of 3.9 compared to a pH of 7.0 for soils irrigated with neutral water. Decreased yields of cultivated crops are probably caused by the use of Al containing acid irrigation water. Increased levels of metals (especially Cd, Co, Ni and Mn) are found in different foodstuffs, but still remain within acceptable ranges. Considering local residents” diets, Cd levels may lead to an increased risk for the human health. Fluoride exposure is of highest concern, with levels in drinking water exceeding guideline values and a lot of local residents suffering from dental fluorosis. Conclusions, Recommendations and Outlook In short, our data indicate that the Ijen crater lake presents a serious threat to the environment as well as human health and agricultural production.     

Investigating the sources of the mutagenic activity found in a river using the Salmonella assay and different water extraction procedures

In the routine São Paulo state (Brazil) surface water quality-monitoring program, which includes the Salmonella microsome mutagenicity assay as one of its parameters, a river where water is taken and treated for drinking water purposes has repeatedly shown mutagenic activity. A textile dyeing facility employing azo-type dyes was the only identifiable source of mutagenic compounds. We extracted the river and drinking water samples with XAD4 at neutral and acidic pH and with blue rayon, which selectively adsorbs polycyclic compounds. We tested the industrial effluent, raw, and treated water and sediment samples with YG1041 and YG1042 and compared the results with the TA98 and TA100 strains. The elevated mutagenicity detected with YG-strains suggested that nitroaromatics and/or aromatic amines were causing the mutagenicity detected in the samples analyzed. Positive responses for the blue rayon extracts indicated that mutagenic polycyclic compounds were present in the water samples analyzed. The mutagen or mixture of mutagens present in the effluent and water samples cause mainly frameshift mutations and are positive with and without metabolic activation. The Salmonella assay combined with different extraction procedures proved to be very useful in the identification of the origin of the pollution and in the identification of the classes of chemical compounds causing the mutagenic activity in the river analyzed.     

Quality of roof runoff waters from an urban region (Gdańsk,Poland)

The paper presents the results of testing of roof runoff waters from buildings in the city of Gdańsk (Poland), carried out as a part of a broader research project aimed at the determination of pollutant levels in precipitation. The analytes determined included volatile organohalogen compounds, petroleum hydrocarbons, Na+, K+, NH4+, Mg2+, Ca2+, F-, Cl-, NO2-, NO3-, PO4(3-), SO4(2-) ions, as well as organonitrogen, organophosphorus and organochlorine pesticides. In addition, the toxicity and pH of the samples were examined. The samples were collected over a period of six months, during or immediately following precipitation events. More than half of the samples (25) were found to be toxic, with inhibition exceeding 20%. The toxicity was weakly correlated to the levels of organonitrogen and organophosphorus pesticides in runoff waters. It was established that at least in some cases the roofing material affected the levels of the pollutants found in the samples.     

Toxic effects of orimulsion on rainbow trout <Emphasis Type="Italic">oncorhynchus mykiss</Emphasis>

GOAL, SCOPE AND BACKGROUND: Orimulsion (stable emulsion of natural bitumen and water) is a new imported industrial fuel in Lithuania. No data on its toxicity to fish is freely available. The aim of this study was to investigate sensitivity of rainbow trout (Oncorhynchus mykiss) to acute and chronic toxicity of orimulsion and to estimate the Maximum Acceptable Toxicant Concentration (MATC) of orimulsion to fish. METHODS: Laboratory tests were conducted on rainbow trout in all stages of development (embryos, larvae, adults). Acute toxicity (96-hour duration) and long-term (28 or 60-day duration) tests evaluating the wide range spectrum of biological indices were performed under semi-static conditions. RESULTS AND DISCUSSION: Median lethal concentration (96-hour LC50) values and their 95% confidence intervals derived from the tests were: 0.1 (0.09-0.12) to embryos, 0.06 (0.05-0.07) to larvae and 2.22 (2.02-2.43) to adult fish, and 28-day LC50 to adult fish was found to be 0.26 (0.21-0.32) g/l of total orimulsion respectively. The acute toxicity of orimulsion to rainbow trout can be characterised by a narrow zone of toxic effect and a sharp boundary between lethal and sublethal concentrations. The lowest 'safe' or 'no-effect' concentration values of total orimulsion obtained in long-term tests were equal to 0.09 g/l to adult fish, 0.019 g/l to embryos, and 0.0017 g/l to larvae. Proposed value of 'application factor' for orimulsion was found to be equal to 0.03. Since orimulsion has the property to disperse in all water volume, its toxic effect on fish can be characterised by the combined effects of dispersion and water-soluble-fraction. CONCLUSIONS: Maximum Acceptable Toxicant Concentration (MATC) of 0.0017 g/l of total orimulsion to fish was derived from long-term tests based on the most sensitive parameter of rainbow trout larvae (relative mass increase at the end of the test). According to substance toxicity classification accepted for Lithuanian inland waters, orimulsion can be referred to substances of 'moderate' toxicity to fish. RECOMMENDATIONS AND OUTLOOK: For prediction and evaluation of toxic impact of orimulsion accident spills on fish, some recommendations should be given. Since orimulsion has the property to disperse in all water volume during short time periods, the amounts of both spilled orimulsion and polluted water should be ascertained. Once both parameters are known, the real concentration of orimulsion in the water body must be determined. Then this concentration must be compared with 'safe' concentration to fish. By use of 'application factor' 0.03, approximate MATC for other fish species can be estimated when only acute toxicity data (96-hour LC50 value) is available.