Evaluation of geochemical methods for discrimination of metal contamination in Antarctic marine sediments: a case study from Casey Station

Detecting anthropogenic metal contamination in regional surveys can be particularly difficult when there is a lack of pre-disturbance data, especially when trying to differentiate low to moderate levels of contamination from background values. Furthermore, comparisons with other regional studies are confounded by differing analytical methods used and variations in sediment properties such as grainsize. Several types of geochemical technique, including weak acid partial extraction, strong acid extractions and total digestion have been used. Attempts have been made to overcome the influence that grainsize has on chemical concentrations in heterogeneous environments by analysing the fines, typically the mud fraction (<63 microm), in an attempt to improve the detection of anthropogenic contamination. Here we compare a weak acid partial extraction using 1M HCl and total digestion methods for a regional survey of reference and impacted sites in Antarctica using both whole sediment (<2 mm) and mud (<63 microm) fractions. The 1M partial extraction on whole sediment (<2 mm) most closely distinguished weakly, or moderately, impacted sites from reference locations. It also identified small scale within-location spatial variation in metal contamination that the total digest did not detect. Compared with total digests or analysis of the <63 microm fraction alone, this method minimised the possibility of a Type II statistical error in the regional survey - that is, failing to identify a site as being contaminated when it has elevated metal concentrations. To allow inter-regional comparison of sediment chemistry data from elsewhere in Antarctica, and also more generally, we recommend a 1M HCl partial extraction on whole sediment (<2 mm).     

A practical look at the variable area transect

The variable area transect (VAT) is a plotless density estimator that has received little attention in the ecological literature despite having potentially robust estimation properties. VAT allows for density estimations without the lengthy search times associated with other plotless density estimators. In spite of this, little has been written about the effect of varying transect widths on its density estimation properties or on the practical implementation of the VAT in field settings. An artificial population sampler was used to examine the effect of transect width on density estimates obtained using the VAT. Three transect widths were chosen corresponding to the mean object size, the largest object size, and twice the size of the largest object. Transect width had a marked effect on the quality of the density estimation, with the largest transect width resulting in significant negative biases in estimation. For the narrowest width, most estimates were within 10% of the true value for a nonrandomly distributed population. The practical considerations of choosing a VAT transect width are enumerated.     

PCDD/Fs in ambient air collected in Zagreb, Croatia

Levels of PCDD/Fs were measured at four different sites in Zagreb, capital of Croatia. Also one sample was taken during spontaneously initiated open fire on a landfill and one sample where garden waste of unknown content was burnt. Over period 1997–2000, 28 samples were collected and levels ranged between 9 and 306 fg I-TEQ m⁻³, except in the sample collected during landfill fire. Air PCDD/F levels in Zagreb at four sites were different and the highest levels were observed in industrial area. Seasonal variation of levels is also evident with higher levels in winter than in summer. Our results show that PCDD/F levels in ambient air collected in Zagreb are at lower end of the published data range. In general, homologue profiles were quite similar for all locations, the concentration of PCDD homologues increased while the concentration of PCDF homologues decreased with increasing degree of chlorination. PCDD/F levels in the landfill fire sample was 13 200 fg I-TEQ m⁻³ which are much higher than levels in garden waste burning sample or in sample collected at industrial site. During landfill fire, the concentration of 2,3,7,8-TCDF becomes even higher than the concentration of OCDF and is equal to the concentration of 1,2,3,4,6,7,8-HpCDF.     

Bromate formation on the non-porous TiO2 photoanode in the photoelectrocatalytic system

The increasing use of ozone in water disinfection processes has been the focus of considerable concern in regards to inorganic disinfection by product formation of bromate in waters containing bromide. Due to the public health risk caused by the presence of bromate as a suspected carcinogen, attention had been addressed to the conditions under which bromate is formed. In this study, photoanodic bromine generation and bromate (BrO(3)(-)) formation were investigated using a TiO(2) electrode in a photoelectrocatalytic (PEC) treatment process. The separation of anodic and cathodic reactions in the PEC system resulted in a pH decrease from 9.3 to 3.0 in the photoanode compartment and an increase to 11.0 in the cathode compartment. Under a photo-illumination intensity of 5.7 m W cm(-2) UV, a biasing potential of +1.0V vs SCE, a pH of 6.0 and at a NaBr concentration of 1.0 x 10(-2) M, active bromine formation increased over time with 2.4 x 10(-6) M min(-6) rate and reached a steady-state concentration of 1.44 x 10(-4) M in 60 min. Bromate formation was detected after a lag-period of 15 min and exhibited a continuous increasing trend with respect to irradiation time. No bromate formation was observed below pH 6.5 whereas an increasing bromate concentrations and pH up to pH=8.5 were noted.     

137Cs budget during the period of 1960s in a small drainage basin on the Loess Plateau of China

A sediment profile with a thickness of 28.12 m in a failed reservoir in a small catchment of the Yuntaishan Gully in the Loess Plateau of China consisted of 44 flood couplets deposited during the period from 1960 to 1970 with total volume of 2.36 x 10(6)m(3). Specific sediment yields for a flood event varied from 300 t km(-2) to 14,400 t km(-2) and annual sediment yields varied from 2500 t km(-2) in 1966 to 40,000 t km(-2) in 1964 with a mean value of 12,700 t km(-2)a(-1) for the period. Average annual (137)Cs concentrations of the sediments increased from 0.92 Bq kg(-1) in 1960 to 4.82 Bq kg(-1) in 1963, then decreased to 1.53 Bq kg(-1) in 1970. The total (137)Cs activity in the reservoir sediments was 9.22 x 10(9) Bq, which accounted for 31.9% of the total (137)Cs fallout precipitation of 2.89 x 10(10) Bq within the catchment during the period. The proportion of the (137)Cs loss from the catchment to the (137)Cs fallout precipitation within the catchment in a year varied between 8.01% and 66.8%, and it was 20.9% for the peak (137)Cs deposition year of 1963 and 52.0% in 1964. By analysis of the (137)Cs budget in the catchment for the (137)Cs peak precipitation period from 1962 to 1964, the (137)Cs surface enrichment coefficient Gamma should be much less than 0.23. And for calculation of soil losses on the cultivated land in the inter-gully area by using the Mass Balance Model II, the value of Gamma should be 0.05-0.1.     

Towards corporate environmental information disclosure: an empirical study in China

High levels of corporate environmental information disclosure (EID) have become pressing issues due to environmental protection around the world. Corporate EID refers to disclose their information on activities related to the natural environment, environmental protection and use of resource. Emerging economies in developing countries seem to face a formidable task for promoting corporate EID. Based on data of corporate EID for 871 listed manufacturing companies in China, this paper examines the status of corporate EID. The significant difference of selectively disclosing their environmental information for the listed companies is investigated. The relations among the level of EID, industrial sector, company size, and company ownership are also explored. Surprisingly, the result reveals the inverse relationship between the marketization level and corporate EID.     

Preying on commercial fisheries and accumulating paralytic shellfish toxins: a dietary analysis of invasive Dosidicus gigas (Cephalopoda Ommastrephidae) stranded in Pacific Canada

In fall of 2009, several mass strandings of Humboldt squid (Dosidicus gigas) occurred on Vancouver Island (49°7′60N 125°54′0W). Morphological dissections coupled with DNA barcoding of stomach contents revealed Sardinops sagax (Pacific sardine) and Clupea pallasii (Pacific herring) as their primary prey. Plastic nurdles, fishing line, bull kelp, eelgrass, and a guillemot feather were also discovered. The primary prey, Pacific sardines and Pacific herring, are known to bioaccumulate paralytic shellfish toxins (PSTs); additionally, both PSTs and domoic acid (DA) have been implicated in other mass strandings. Therefore, stomach contents, and other tissues when possible, were tested for PSTs and DA. Testing revealed DA concentrations below regulatory guidance levels for human consumption, yet PSTs were well in excess. Though we cannot conclude that PSTs were the definitive cause of the strandings, our findings are the first report of PSTs in D. gigas.