Adsorption and breakdown of penicillin antibiotic in the presence of titanium oxide nanoparticles in water

The fate and transport of antibiotics in natural water systems is controlled in part by interactions with nanometer (10⁻⁹ m) metal oxide particles. Experiments were performed by mixing solutions of ampicillin (AMP), a common, penicillin-class human and veterinary antibiotic, with 25 nm-TiO₂ (anatase) nanoparticles at different pH conditions. Both sorption and degradation of AMP were observed in the AMP-nanoparticle solutions. For AMP concentrations from ∼3 μM to 2.9 mM the overall AMP removal from solution can be described by linear isotherms with removal coefficients (K_r) of 3028 (±267) L kg⁻¹ at pH 2, 11,533 (±823) L kg⁻¹ at pH 4, 12,712 (±672) L kg⁻¹ at pH 6, and 1941 (±342) L kg⁻¹ at pH 8. Mass spectral analysis of AMP solutions after removal of the solid nanoparticles yielded ions that indicate the presence of peniclloic acid, penilloic acid and related de-ammoniated by-products as possible compounds resulting from the degradation of AMP at the TiO₂ surface.     

Kinetic analysis of constructed systems for the recovery of contaminated areas by acid mine drainage

INTRODUCTION: Flowing of the acid mine drainage may contaminate the adjacent water bodies causing substantial changes in the aquatic ecosystem. This aspect is the most relevant problem in the southern of Santa Catarina once the contaminated areas are inserted in the watershed of the Araranguá, Urussanga, and Tubar?o rivers, increasing the need for recovery studies. These areas are between Criciúma, I?ara, Urussanga, Siderópolis, Lauro Müller, Orleans, and Alfredo Wagner towns where a conservation unit exist called the Environmental Preservation Area of Baleia Franca. Aiming to compare the kinetics of the ash derived from burning coal and to neutralize acid mine drainage, different neutralizer, limestone, fly, and bottom ash, was mounted on a pilot scale experiment. DISCUSSION: The transport parameters showed the same order of infiltration and dispersion: fly ash < bottom ash < limestone. The order of measured alkalinity was: limestone < fly ash < bottom ash, with pH values of 9.34, 12.07, and 12.25, respectively. The limestone kinetics of acidic drainage neutralization was first order with reaction rate constant k?=?0.0963 min(-1), bottom ash was 3/4 with k?=?0.0723 mol(1/4) L(-1/4) min(-1), and the fly ash had higher order kinetics, 4/3, with reaction rate constant k?=?27.122 L(1/3) mol(-1/3) min(-1). However, by mathematical modeling, it was found that due to a combination of transport and kinetics, only limestone treatment reached a pH above 6 within 5 years, corresponding to the ideal as planned.     

Passive air monitoring of PCBs and PCNs across East Asia: a comprehensive congener evaluation for source characterization

A comprehensive congener specific evaluation of polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs) in the atmosphere was conducted across East Asia in spring 2008, applying polyurethane foam (PUF) disk passive air sampler (PAS) as monitoring device. Mean concentrations derived for Japan, China and Korea were 184 ± 24, 1100 ± 118, and 156 ± 20 pg m⁻³ for ∑₂₀₂ PCBs, and 9.5 ± 1.5, 61 ± 6, and 16 ± 2.4 pg m⁻³ for ∑₆₃ PCNs, respectively. Relative to reported data from 2004, the present results suggest that air PCBs concentrations have not changed much in Japan and Korea, while it has increased by one order of magnitude in China. From principal component analysis, combustion emerged highly culpable in contemporary emissions of both PCBs and PCNs across the East Asian sub-region. Another factor derived as important to air PCBs was re-emissions/volatilization. Signals from PCBs formulations were also picked, but their general importance was virtually consigned to the re-emissions/volatilization tendencies. On the contrary, counterpart PCNs formulations did not appear to contribute much to air PCNs.     

Transition metal-modified zinc oxides for UV and visible light photocatalysis

In order to use photocatalysis with solar light, finding more active and especially visible light active photocatalysts is a very important challenge. Also, studies of these photocatalysts should employ a standardized test procedure so that their results can be accurately compared and evaluated with one another. A systematic study of transition metal-modified zinc oxide was conducted to determine whether they are suitable as visible light photocatalysts. The photocatalytic activity of ZnO modified with eight different transition metals (Cu, Co, Fe, Mn, Ni, Ru, Ti, Zr) in three different concentrations (0.01, 0.1, and 1?at.%) was investigated under irradiation with UV as well as with visible light. The employed activity test is the gas-phase degradation of acetaldehyde as described by the ISO standard 22197-2. The results suggest that the UV activity can be improved with almost any modification element and that there exists an optimal modification ratio at about 0.1?at.%. Additionally, Mn- and Ru-modified ZnO display visible light activity. Especially the Ru-modified ZnO is highly active and surpasses the visible light activity of all studied titania standards. These findings suggest that modified zinc oxides may be a viable alternative to titanium dioxide-based catalysts for visible light photocatalysis. Eventually, possible underlying mechanisms are proposed and discussed.     

Sources and distribution of polychlorinated-dibenzo-p-dioxins and -dibenzofurans in soil and sediment from the Yellow Sea region of China and Korea

Polychlorinated-dibenzo-p-dioxins and -dibenzofurans (PCDD/Fs) were measured in soils and sediments from the Yellow Sea region. Korean soils and sediments mostly contained detectable PCDD/Fs and showed a widespread distribution among locations. Soil and sedimentary PCDD/Fs from China were comparable to or less than those in Korea. The patterns of relative concentrations of individual congeners in soils were different between the two countries, but similar in sediments. Sources of PCDD/Fs in China and Korea were found to be independent of each other and their distributions reflected matrix-dependent accumulation. Spatial distribution indicated some point sources in Korea while Chinese sources were more widespread and diffuse. PCDD/Fs measured in the coastal areas of the Yellow Sea were comparable to or less than those previously reported in for eastern Asia. However, ∑TEQs in soils and sediments were near to or, in some cases exceeded environmental quality guidelines.     

Nitrogen concentrations in mosses indicate the spatial distribution of atmospheric nitrogen deposition in Europe

In 2005/6, nearly 3000 moss samples from (semi-)natural location across 16 European countries were collected for nitrogen analysis. The lowest total nitrogen concentrations in mosses (<0.8%) were observed in northern Finland and northern UK. The highest concentrations (≥1.6%) were found in parts of Belgium, France, Germany, Slovakia, Slovenia and Bulgaria. The asymptotic relationship between the nitrogen concentrations in mosses and EMEP modelled nitrogen deposition (averaged per 50 km × 50 km grid) across Europe showed less scatter when there were at least five moss sampling sites per grid. Factors potentially contributing to the scatter are discussed. In Switzerland, a strong (r² = 0.91) linear relationship was found between the total nitrogen concentration in mosses and measured site-specific bulk nitrogen deposition rates. The total nitrogen concentrations in mosses complement deposition measurements, helping to identify areas in Europe at risk from high nitrogen deposition at a high spatial resolution.     

Analysis of surface and aerosol polarized reflectance for aerosol retrievals from polarized remote sensing in PRD urban region

A precise estimate of polarization induced by surface is crucial for polarized remote sensing dedicated to monitoring aerosol properties over urban area. The accurate knowledge of interaction between surface and aerosol polarized reflectance is essential for accurately achieving aerosol properties. In order to study surface and aerosol polarized reflectance for aerosol retrievals over urban area, a new airborne directional polarimetric camera (DPC) with high spatial resolution (4 m at 4000 m a.g.l) was developed. The surface polarized reflectance over distinct surface covers of urban area (forest, shrub, and soil) were studied using DPC measurements during a field campaign in the Pearl River Delta (PRD), China. The large variations were found in surface polarized reflectance of distinct urban covers due to surface type variability. For all surface types, the empirical BPDF model cannot describe accurately surface polarized reflectance at all possible illumination and observation geometries. From the quantitatively study of relationship between surface and aerosol polarized contribution to DPC measurements, we show that the polarized contributions of aerosol, which optical properties were defined by ground-based measurements, are much larger than the polarized contribution of surface, and found that the polarized contribution of surface covers increases with decreasing NDVI. The effect of polarization accuracy of measurements on aerosol retrieval was also investigated using DPC measurements, and found that 0.1% polarization accuracy of measurements can be neglected when AOD is retrieved using polarized measurements. Based on the information of effects of polarized reflectance differences between distinct surface covers and polarization accuracy of polarized measurements on retrieved aerosols over urban area, we found that the accuracy of aerosol retrieval over forest covers is higher than other surface types using polarized remote sensing.     

Cu fractions, mobility and bioavailability in soil-wheat system after Cu-enriched livestock manure applications

Fertilization of crops with livestock manure (LM) is a common waste disposal option, but repeated application of LM containing high concentrations of heavy metals such as Cu could lead to crop toxicity and environmental risk. To examine the Cu availability and uptake by wheat in a Mollisol affected by Cu-enriched LM, pot experiments were conducted. LM (376 mg kg⁻¹ Cu originally) was spiked with different concentrations of Cu (0, 100, 200, 400, 600 and 800 mg kg⁻¹ soil, added as CuSO₄) to simulate soil Cu contamination by LM application. The results indicated that Cu was predominately distributed in organic bound fraction, while the most drastic increase was found in reducible fraction. Acid-extractable fraction played a more important role than other fractions in controlling the mobility and bioavailability of Cu. DTPA-extractable Cu may overestimate the Cu bioavailability since DTPA solution could extract soluble and part of stable forms. The application of LM at 1% level significantly decline the Cu mobility, but that at 3% level exhibited the opposite effect.Although the quantities of Cu in wheat was very low compared with the accumulation in soil, Cu concentrations in roots increased evidently from 12 to 533 mg kg⁻¹ and that in aerial parts were in a narrow range from 12.1 to 32.7 mg kg⁻¹, indicating the more sensitivity of roots to the Cu toxicity. The Cu concentrations in grains after 3% manure application did not approach the threshold for Cu toxicity (<20 mg kg⁻¹) even at higher Cu addition rates.     

Experimental investigation and modelling of tritium washout by precipitation in the area of the nuclear power plant of Paks, Hungary

Tritium occurs in nature in trace amounts, but its concentration is changing due to natural and artificial sources. Studies focusing on natural tritium have to take into account the effect of artificial sources. Also, the impact of tritium is an important issue in environmental protection, e.g. in connection with the emissions from nuclear power plants. The present work focuses on the rain washout of tritium emitted from the Paks nuclear power plant in Hungary. Rainwater collectors were placed around the plant and after a period of precipitation, rainwater was collected and analysed for tritium content. Samples were analysed using low-level liquid scintillation counting, with some also subject to the more accurate ³He ingrowth method. The results clearly show the trace of the tritium plume emitted from the plant; however, values are only about one order of magnitude higher than environmental background levels. A washout model was devised to estimate the distribution of tritium around the plant. The model gives slightly higher concentrations than those measured in the field, but in general the agreement is satisfactory. The modelled values demonstrate that the effect of the plant on rainwater tritium levels is negligible over a distance of some kilometres.     

Formation of toxic species and precursors of PCDD/F in thermal decomposition of alpha-cypermethrin

This article examines the thermal decomposition of alpha-cypermethrin, one of the most common pyrethroid pesticides. The objective was to identify its decomposition pathways and to gain an understanding into the formation of toxic species in the environment, including those that may behave in combustion systems, especially in fires in the environment, as precursors for PCDD/F (polychlorinated dibenzo-p-dioxins and dibenzofurans). The experiments were conducted under non-oxidative conditions using a tubular reactor housed in a three-zone heating furnace and operated with a dilute stream of alpha-cypermethrin in 99.999% nitrogen. The condensable products were identified and quantitated, after being collected in a cold solvent trap and in an activated charcoal cartridge. The study revealed the formation of pollutants including precursors of toxic PCDD/F such as diphenyl ether and phenol. It was also found that the decomposition of alpha-cypermethrin involved parallel pathways of an unusual vinylcyclopropane rearrangement-cum-aromatisation reaction transforming alpha-cypermethrin and a rupture of the C(O)OC(CN) linkage. The former is similar to that occurring in the decomposition of permethrin pesticide, whereas the latter constitutes a newly discovered channel for the formation of pollutants. Density functional theory (DFT) calculations allowed us to attribute the occurrence of the second pathway to the effect of the cyanide group in significantly weakening the OC bond.