Assessment of the detection abilities of monitoring networks for passive tracers at local and regional scales

We propose a method to evaluate the detection abilities of networks used for protection purposes. Such networks are designed for the detection of nuclear, biological or gaseous emissions, without constraint on the source location. Their assigned goal is to have the best chance to detect a threatening emission located anywhere in the vicinity of a domain to protect. Two sensors siting applications are addressed: sensors placed in the surroundings of a facility to protect, or sensors carried by people scattered within a small area. A network protection ability is related both to its detection scope, and to its response time. To assess the performance of such networks, two statistical indicators are therefore designed: the detection probability, computed on a large number of possible source locations, and the saturation time, which is the time when the maximum detection probability has been reached.Simulations are then carried out with the Polyphemus air quality modeling system for many emission scenarios, including 961 possible source locations, various emitted species, and a few representative meteorological situations. This allows to assess the performance of single sensors as well as full networks, and their sensitivity to parameters like meteorological conditions and source characteristics. The emitted quantity and meteorological dispersion are found to be important parameters, whereas the species type does not significantly influence the results. Two network design methods are considered: (1) networks composed of a given number of the “best” sensors according to an indicator, and (2) sensors placed in circles around the protected domain. The networks built with respect to the detection probability show good results with a limited number of sensors, while the saturation time is not reliable enough to build networks. The networks based on circles also show a good performance in the studied cases, provided there is a sufficient number of sensors.     

Biomonitoring the genotoxic effects of pollutants on <Emphasis Type="Italic">Tradescantia pallida</Emphasis> (Rose) D.R. Hunt in Dourados,Brazil

Purpose  

This study aimed to associate the intensity of vehicular traffic in the city of Dourados (Mato Grosso do Sul State, Brazil) with mutagenic effects and alterations in leaf physiology as measured by the quantity of micronuclei and the leaf surface parameters of Tradescantia pallida.     

Pyrethroid use-malaria control and individual applications by households for other pests and home garden use

Presence of pyrethroid insecticides in human breast milk and in thatch wall material of dwellings from Southern Africa subtropical area (Manhiça, Mozambique) was investigated to assess potential pyrethroid route of human exposure. Human breast milk samples were collected during 2002 when pyrethroids were widely used as insecticides for mosquito bed nets in Mozambique for malaria control. The median concentration value of total pyrethroids ranged between 87 and 1200 ng/g lw, with λ-cyhalothrin being the most predominant pyrethroid in human breast milk contributing for 35% of the total amount. Moreover, and for the first time, an isomer-specific enrichment was found in human breast milk, showing a selective isomeric accumulation or metabolism in the human body. Based on the calculated pyrethroid concentrations in human breast milk, the daily ingestion rate of pyrethroid was estimated. The nursing infant dietary intake ranged from 0.67 to 9.0 μg (kg of body weight)^− 1 day^− 1. In addition, thatch materials collected after the reintegration of dichlorodiphenyltrichloroethene (DDT) as insecticide residual spraying (IRS) in Mozambique, showed the presence of pyrethroids with concentration values ranging between 6.9 and 700 ng/g dw. In thatch material as well as in human breast milk, pyrethroid contamination was mainly attributed to the agriculture usage of this insecticide knowing that agriculture represent the 80% of the economy in Mozambique. However, a possible usage of this insecticide as IRS in Mozambique cannot be excluded despite their low efficiency for malaria control. The continued use of these compounds (both for agriculture and malaria prevention) and the ingestion rates calculated from the breast milk concentrations indicate that these insecticides cannot be overlooked for the assessment of the lactation risks of breastfeeding infants from the Manhiça region.     

Novel approach for assessing heavy metal pollution and ecotoxicological status of rivers by means of passive sampling methods

In order to study the pollution of fluvial ecosystems, it is necessary to analyze not only the levels of chemical contaminants in water, but also those accumulated in the sediment matrix, as well as to assess its ecotoxicological status. Eleven Catalan (Spain) river sections (one sampling point per river) located near urban and industrial areas were sampled during winter of 2009. Water pollutants were collected by using passive samplers as Diffusive Gradient in Thin-Films (DGTs) and Semi-Permeable Membrane Devices (SPMDs). Point water samples were also collected. The concentrations of potentially toxic elements (PTE) in water, filtered water, DGTs and sediment samples were analyzed. Aqueous and organic solvent extracts of sediments samples and organic extracts of SPMDs were performed to assess acute toxicity to Vibrio fischeri by Microtox(?), and chronic toxicity to the green alga Pseudokirschneriella subcapitata. Microtox(?) test was also performed with DGT extracts. The results show that metals content of Catalan river waters are below the freshwater screening US EPA benchmarks, excepting some industrial areas (for Hg, Pb, and Zn). In contrast, sediments levels of some rivers were far above freshwater sediment screening US EPA benchmarks (for Zn, As, Cr, Pb, Ni, Hg, and Mn), particularly in the most industrialized areas. A good correlation was found between toxicity values of extracts (from sediments and DGTs) and PTE levels in sediments. The current results support the suitability of using combined point and passive sampling methods for assessing the chemical and ecotoxicological status of aqueous environments.     

The microbiota of an unpolluted calcareous soil faces up chlorophenols: Evidences of resistant strains with potential for bioremediation

To highlight the effects of a variety of chlorophenols (CP) in relation to the response of an indigenous bacterial community, an agricultural Mediterranean calcareous soil has been studied in microcosms incubated under controlled laboratory conditions. Soil samples were artificially polluted with 2-monochlorophenol (MCP), 2,4,6-trichlorophenol (TCP) and pentachlorophenol (PCP), at concentrations ranging from 0.1 up to 5000 mg kg⁻¹. Both activity and composition of the microbial community were assessed during several weeks, respectively, by respirometric methods and PCR-DGGE analysis of extracted DNA and RNA. Significant decreases in soil respirometric values and changes in the bacterial community composition were observed at concentrations above 1000 mg kg⁻¹ MCP and TCP, and above 100 mg kg⁻¹ PCP. However, the persistence of several active bacterial populations in soil microcosms contaminated with high concentration of CP, as indicated by DGGE fingerprints, suggested the capacity of these native bacteria to survive in the presence of the pollutants, even without a previous adaptation or contact with them.The isolation of potential CP degraders was attempted by culture plating from microcosms incubated with high CP concentrations. Twenty-three different isolates were screened for their resistance to TCP and PCP. The most resistant isolates were identified as Kocuria palustris, Lysobacter gummosus, Bacillus sp. and Pseudomonas putida, according to 16S rRNA gene homology. In addition, these four isolates also showed the capacity to reduce the concentration of TCP and PCP from 15% to 30% after 5 d of incubation in laboratory assays (initial pollutant concentration of 50 mg L⁻¹). Isolate ITP29, which could be a novel species of Bacillus, has been revealed as the first known member in this bacterial group with potential for CP bioremediation applications, usually wide-spread in the soil natural communities, which has not been reported to date as a CP degrader.     

Soda-Treated Sisal/Polypropylene Composites

Treated sisal fibers were used as reinforcement of polypropylene (PP) composites, with maleic anhydride-grafted PP (MAPP) as coupling agent. The composites were made by melting processing of PP with the fiber in a heated roller followed by multiple extrusions in a single-screw extruder. Injection molded specimens were produced for the characterization of the material. In order to improve the adhesion between fiber and matrix and to eliminate odorous substances, sisal fibers were treated with boiling water and with NaOH solutions at 3 and 10 wt.%. The mechanical properties of the composites were assessed by tensile, bend and impact tests. Additionally, the morphology of the composites and the adhesion at he fiber–matrix interface were analyzed by SEM. The fiber treatment led to very light and odorless materials, with yields of 95, 74 and 62 wt.% for treatments with hot water, 3 and 10 wt.% soda solution respectively. Fiber treatment caused an appreciable change in fiber characteristics, yet the mechanical properties under tensile and flexural tests were not influenced by that treatment. Only the impact strength increased in the composites with alkali-treated sisal fibers.     

Metals and emerging contaminants in groundwater and human health risk assessment

Environmental Science and Pollution Research - Groundwaters are normally consumed without previous treatment and therefore the monitoring of contaminants in order to guarantee its safety is...     

Synthetic olive mill wastewater treatment by Fenton’s process in batch and continuous reactors operation

Degradation of total phenol (TPh) and organic matter, (expressed as total organic carbon TOC), of a simulated olive mill wastewater was evaluated by the Fenton oxidation process under batch and continuous mode conditions. A mixture of six phenolic acids usually found in these agro-industrial wastewaters was used for this purpose. The study focused on the optimization of key operational parameters of the Fenton process in a batch reactor, namely Fe²⁺ dosage, hydrogen peroxide concentration, pH, and reaction temperature. On the assessment of the process efficiency, > 99% of TPh and > 56% of TOC removal were attained when [Fe²⁺] = 100 ppm, [H₂O₂] = 2.0 g/L, T = 30 °C, and initial pH = 5.0, after 300 min of reaction. Under those operational conditions, experiments on a continuous stirred-tank reactor (CSTR) were performed for different space-time values (τ). TOC and TPh removals of 47.5 and 96.9%, respectively, were reached at steady-state (for τ = 120 min). High removal of COD (> 75%) and BOD₅ (> 70%) was achieved for both batch and CSTR optimum conditions; analysis of the BOD₅/COD ratio also revealed an increase in the effluent’s biodegradability. Despite the high removal of lumped parameters, the treated effluent did not met the Portuguese legal limits for direct discharge of wastewaters into water bodies, which indicates that coupled chemical-biological process may be the best solution for real olive mill wastewater treatment.     

Antioxidant activity shown by olive pomace extracts

In this study, the effects of experimental variables such as type of solvent, sample/solvent ratio, and time of extraction have been evaluated to individuate the best results in phenolic recovery by Olive Pomaces (OP) belonging to Carolea and Ottobratica cultivars. Folin–Ciocaulteu procedure and DPPH and ABTS assays were used, respectively, for total phenol quantification and total antioxidant activity of pomace extracts. The ethanol/water mixture was resulted the most efficient extraction solvent for both olive cultivars. The highest amount of phenolic compounds (171 ± 4 mg of gallic acid 100 g^?1 of dry pomace) was obtained after extraction at 120 min with 2:1 solvent/OP (v/w) of Ottobratica Olive Pomace. The recovery of phenol compounds from olive wastes increases the sustainability of sector, allowing obtaining an extract that could be a suitable alternative in the food industry to the use of synthetic antioxidants in order to improve the quality of foods.