Improving data quality on low level mercury wastewater analysis

In order to compare treatability test results evaluating low-level mercury (Hg) removal from oil refinery wastewater, improvements in Hg analytical methods were conducted at two US EPA certified analytical labs. The revisions in the analytical protocols improved Hg recoveries and hence enabled more reliable data interpretation and comparison for the specific wastewater tested. Nevertheless, significant differences between results from the two laboratories were identified in a split-sample experiment.     

Assessment comparison of commercial TiO2 and TiO2 sol-gel on the degradation of caffeine using artificial radiation

Environmental Science and Pollution Research - The presence of endocrine disrupting compounds in water receptor bodies, such as drugs, currently has in scientific field a great focus of studies...     

Characterization and dispersion modeling of odors from a piggery facility

Piggeries are known for their nuisance odors, creating problems for workers and nearby residents. Chemical substances that contribute to these odors include sulfurous organic compounds, hydrogen sulfide, phenols and indoles, ammonia, volatile amines, and volatile fatty acids. In this work, daily mean concentrations of ammonia (NH3) and hydrogen sulfide (H2S) were measured by hand-held devices. Measurements were taken in several places within the facility (farrowing to finishing rooms). Hydrogen sulfide concentration was found to be 40 to 50 times higher than the human odor threshold value in the nursery and fattening room, resulting in strong nuisance odors. Ammonia concentrations ranged from 2 to 18 mL m(-3) and also contributed to the total odor nuisance. Emission data from various chambers of the pig farm were used with the dispersion model AERMOD to determine the odor nuisance caused due to the presence of H2S and NH3 to receptors at various distances from the facility. Because just a few seconds of exposure can cause an odor nuisance, a "peak-to-mean" ratio was used to predict the maximum odor concentrations. Several scenarios were examined using the modified AERMOD program, taking into account the complex terrain around the pig farm.     

Morphology of <Emphasis Type="Italic">Penicillium funiculosum</Emphasis> During Biodegradation of Poly (β-hydroxybutyrate-co-β-hydroxyvalerate) [PHBV] with Poly (ε-Caprolactone) [PCL] Blends

Blends of poly (β-hydroxybutyrate-co-β-hydroxyvalerate) with poly (ε-caprolactone) were produced using melt mixing and solvent casting techniques. The biodegradation of blends was tested based in the ASTM G21-90 using Penicillium funiculosum fungal specie. The CO₂ production during biodegradation was measured and fitted using the Gompertz model. Biodegradation of blends varies according to the mixing technique and the proportion of bacterial polymers in the blends. Although lag phase was larger, solvent-casted blends were easier to degrade due to their porous surface and relative lower crystallinity. P. funiculosum morphology during biodegradation appeared to be related to carbon availability i.e. larger and more complex conidiophores, more phialides per conidiophore and the presence of double-phialides, were found in blends with higher PHAs proportion. P. funiculosum morphology was independent to the blending technique used. Hence, morphology of P. funiculosum could be useful as a reference for carbon bioavailability of the blends.     

Trace elements distributions at Datoko-Shega artisanal mining site,northern Ghana

Environmental geochemistry classifies elements into essential, non-essential and toxic elements in relationship to human health. To assess the environmental impact of mining at Datoko-Shega area, the distributions and concentrations of trace elements in stream sediments and soil samples were carried out. X-ray fluorescence analytical technique was used to measure the major and trace element concentrations in sediments and modified fire assay absorption spectrometry in soils. The results showed general depletion of major elements except titanium oxide (TiO₂) compared to the average crustal concentrations. The retention of TiO₂ at the near surface environment probably was due to the intense tropical weathering accompanied by the removal of fine sediments and soil fractions during the harmattan season by the dry north-east trade winds and sheet wash deposits formed after flash floods. The results also showed extreme contamination of selenium (Se), cadmium (Cd) and mercury (Hg), plus strong contaminations of arsenic (As) and chromium (Cr) in addition to moderate contamination of lead (Pb) in the trace element samples relative to crustal averages in the upper continental crust. However Hg, Pb and Cd concentrations tend to be high around the artisanal workings. It was recognised from the analysis of the results that the artisanal mining activity harnessed and introduces some potentially toxic elements such as Hg, Cd and Pb mostly in the artisan mine sites. But the interpretation of the trace element data thus invalidates the elevation of As concentrations to be from the mine operations. It consequently noticed As values in the mine-impacted areas to be similar or sometimes lower than As values in areas outside the mine sites from the stream sediment results.

     

Sorption of hazardous metals from single and multi-element solutions by saltbush biomass in batch and continuous mode: interference of calcium and magnesium in batch mode

Batch studies were performed to determine the interference of calcium (Ca) and magnesium (Mg) on the sorption of Cu(II), Cd(II), Cr(III), Cr(VI), Pb(II), and Zn(II) [from CuSO(4), K(2)Cr(2)O(7), Pb(NO(3))(2), Cr(NO(3))(3), ZnCl(2), and Cd(NO(3))(2)] by saltbush (Atriplex canescens) biomass. The results demonstrated that Ca and Mg at concentrations of at least 20 times higher than the concentration of most of the target metals did not interfere with the metal binding. The data show that the batch binding capacity from a multimetal solution at pH 5.0 was (micromol/g) about 260 for Cr(III) and Pb, and about 117, 54, and 49 for Cu, Zn, and Cd, respectively. The use of 0.1M HCl allowed the recovery of 85-100% of the bound Cu, Cr(III), and Pb, and more than 37% of the bound Cd and Zn. The column binding capacity for Pb was about 49 micromol/g from both the single and multimetal solutions, while it was, respectively about 35 and 23 micromol/g for Cr(III). The binding capacity for Cu and Zn from the single and multimetal column experiments was 35 micromol/g and less than 10 micromol/g, respectively. The stripping data from the single column experiment showed that 0.1M HCl allowed the recovery of all the bound Cu and Zn, 90% and 74% of the bound Pb and Cr(VI), respectively, and less than 25% of the bound Cd and Cr(III), while the stripping from the multimetal experiment showed that 0.1M HCl allowed the recovery of all the bound Cu and about 74%, 54%, 43%, and 40% of the bound Pb, Zn, Cd, and Cr(III), respectively.     

Using Phylogenetic Diversity Measures to Set Priorities in Conservation: an Example from Southern South America

Abstract: Phylogenetic diversity measures rank areas for biodiversity conservation priorities based on information encoded in phylogenies (cladograms). The goal of these ranks for conservation is to consider as many factors as possible that provide additional taxic information, such as taxa richness, taxa distributional patterns, area endemicity, and complementarity between areas. At present there are many measures that consider phylogenetic information, including node-based, genetic-distance, and feature-based measures. We devised a modified phylogenetic node-based index that we call "taxonomic endemicity standardized weight," which considers not only the taxonomic distinctness of the taxa that inhabit a given area but their endemicity as well. Once the standardized weight of the taxonomic endemicity identifies the area of highest priority, complementarity can be used to identify the second area and so on. We used this node-based index to rank priority areas for conservation in southern South America, and we compared the results of our rankings to results based on other node-based indexes. Our index identified Santiago district, in Central Chile province, as the highest priority area for conservation, followed by Maule, Malvinas, and districts of Subantarctic province. Malvinas exhibits greater complementarity relative to Santiago than Maule does, however, so Malvinas is ranked second in priority. Indexes based on phylogenetic information measure the evolutionary component of biodiversity and allow one to identify areas that will ensure the preservation of evolutionary potential and phylogenetically rare taxa. The modified index we propose is sensitive to taxic distinctness and endemicity as well and allows information from diverse taxa to be combined (i.e., different cladograms). The use of complementarity allows for preservation of the maximum quantity of taxa in a minimal number of protected areas.     

Local Population Dynamics in Metapopulation Models: Implications for Conservation

Abstract: Habitat fragmentation and the division of populations into spatially separated units have led to the increasing use of metapopulation models to characterize these populations. One prominent model that has served as a heuristic tool was introduced by Levins and is based on a collection of simplifying assumptions that exclude information on the dynamics and spatial distribution of local populations. Levins's and similar models predict the proportion of occupied habitat patches at equilibrium and the conditions needed to avoid total extinction. There are many obvious concerns about using such models, including how realistic alterations might change the predictions and whether occupancy has any relationship to population-level processes. Although many of the assumptions of these simple models are known to be unrealistic, we do not know how the assumptions affect model predictions. We simulated a metapopulation, and our results show that assumptions such as homogeneity of habitat patches, random migration among patches, equivalent extinction probabilities in all patches, and a large number of patches can lead to large overestimations of habitat occupancy. But when we explicitly modeled the underlying population dynamics within each patch, we found (1) that there was a strong correlation between proportion of occupied patches and total metapopulation size and (2) that the distribution of individuals among patches was relatively insensitive to model assumptions. Thus, our results show that although realistic modifications will change model predictions for occupancy, occupancy and population trends will be correlated. These correlations between occupancy and population size suggest that occupancy models may have some utility in conservation applications.     

Butyltin Compounds in Sediments of the Bahía Blanca Estuary, Argentina

Systematic measurements of both Tributyltin (TBT) and Dibutyltin (DBT) in sediments along different locations in the inner zone of Bahía Blanca estuary were done. Two samples were taken near the main dry dock facility, at Puerto Belgrano naval base, in Argentina. TBT concentrations from non-detected to 170.3 ng Sn g⁻¹ were measured in the inner region of the estuary, and higher one of 3,288 ng Sn g⁻¹ near the dry dock at Puerto Belgrano. DBT values ranging between non-detected and 75.2 ng Sn g⁻¹ were obtained along the principal channel, but extreme concentration of 1,645 ng Sn g⁻¹ was measured at Puerto Belgrano. These values show that this estuary is affected by organotin pollution, mainly in areas of heavy shipyard activities.