Discrete-choice experiments valuing local environmental impacts of renewables: two approaches to a case study in Portugal

Despite the often mentioned environmental benefits associated with transition from fossil fuels to renewable energy sources, their use for electricity production has non-negligible negative environmental impacts. The most commonly mentioned in surveys concern different types of landscape impacts, impacts on the fauna and flora, and noise. These impacts differ by size and location of plants, and by source of energy, rendering the policy decision complex. In addition, there are other welfare issues to take into consideration, as positive and negative environmental impacts are not evenly distributed among population groups. This paper proposes to compare the welfare impacts of renewable energy sources controlling for the type of renewable as well as the specific environmental impact by source. To this end, two discrete-choice experiments are designed and applied to a national sample of the Portuguese population. In one case, only individual negative impacts of renewables are used, and in another case, the negative impacts interact with a specific source. Results show the robustness of discrete-choice experiments as a method to estimate the welfare change induced by the impacts of renewable energy sources. Overall, respondents are willing to pay to reduce the environmental impacts, thus making compensation for local impacts feasible. Moreover, the estimations reveal that respondents are significantly sensitive to the detrimental environmental effects of specific renewable energy sources, being willing to pay more to use these sources of energy relative to others.     

Environmental pollution in Africa

Mining and minerals industries are fast-growing, but at the same time, they have gained more attention due to their impacts over the environment and society. This research aims to provide new insights into the topic of perception and awareness toward sustainability in industrial mining in Brazil. The work included in-depth interviews with a set of companies’ managers/directors focusing in particular on aspects related to the social and environmental dimensions, including communication and relationship with the community, impact assessment and mitigation strategies. The knowledge and use of for formal indicators was also evaluated and analyzed through the proposed Model for Sustainability Assessment of Mining (SAoM model), which was applied to all participating companies. The results put in evidence the existing gap between large and small companies, with these last ones showing lower awareness for the impacts of their activities. The lack of community engagement and of local stakeholders’ involvement, as well as the disregard for actions to mitigate their environmental and social impacts, is the main challenges to be overcome by this sector. The sector has then a long path to go toward sustainability and an active involvement of public institutions is required to allow for its development without compromising locals welfare.     

Influence of Clear Fellings on the Bryophyte Component of the Broad-leaved Forests of the Bashkir Cis-Ural Region

The change in the composition of the bryophyte component of succession communities that occur in the process of natural regeneration at the site of clear felling of the indigenous elm—maple–linden forests of the Bashkir Cis-Ural Region has been studied. The vulnerability of species to the consequences of felling is affected by their substrate confinement, ecological amplitude in relation to the factors of temperature, humidity, variability of soil moisture, and type of life strategy. In the secondary aspen forests, the absence or low constancy of nemoral epiphytic and ground mosses was noted.     

Factors Affecting Predator-Prey Distribution in a Protected Area,Tehran, Iran (a Case with Wolves and Wild Sheep)

We tried to model habitat suitability of two prey and predator species including wild sheep (Ovis orientalis) and wolf (Canis lupus) in Varjin protected area located in northern east of Tehran using a presence only method, maximum entropy (MaxEnt). Totally 11 environmental variables were measured in the species presence points which can be classified in three groups including topographical, vegetation and distal variables. Resulted maps indicated that habitat variables such as slope (ranging from 35 to 40 percent) and elevation (lower than 1700 meters above sea level) are both institute those factors which mostly affect studied prey and predator habitat use. Our results regarding prey and predator geographical range of used habitat indicated that wolves cover most area than wild sheep which show more dispersed habitat resources for the prey species. ENMTools test revealed that wolf’s niche breadth is more than twice as much as wild sheep’s. Wild sheep in Varjin protected area has a relatively narrow geographical extent and shows a tendency to marginal habitats while wolves cover obviously more areas which denotes its high mobility and low dependency to specific habitats.     

Ecophysiology of Steppe Mouse Subspecies <Emphasis Type="Italic">Mus spicilegius spicilegus</Emphasis>, Peteni, 1883 (Rodentia,Mammalia) at the South Boundary of its Distribution

Diet, food preferences and main ecophysiological characteristics such like energy requirements and thermoregulation characteristics of Mus spicilegus spicilegus (Petenyi, 1882) were studied. The most preferred foods for the mice were seeds of weed species that composed more than 85% of their diet. The results of food selection experiments shows that the total daily consumption by mice is 2.77 ± 0.76 g/animal/day or 5.5 kJ/g/day or 84.9 kJ/animal/day. From the total daily energy consumption 16.4% go back to nature in the form of feces and urine and the rest 83.6% animals utilized for assimilation. The results of the temperature preferences for Mus s. spicilegus shows preferred temperature zone from around 26 to 36°C where mice spent about 72% of the experimental time. The lowest value of oxygen consumption for resting metabolism rate (RMR) was registered at 30°C–3.20 ± 0.71 cm³ O₂/g/h. It is possible to consider that the thermoneutral zone is around these temperature values. The obtained results give reason to conclude that from an ecophysiologycal point of view the climate in the south boundary of distribution provides optimal conditions for species development. The main cause for population decreasing probably is the loss of open habitats including natural steppe grasslands.     

Holocene Dynamics of Vegetation and Ecological Conditions in the Center of the East European Plain

Changes in the vegetation and fire regimes in the central East European Plain during the second half of the Holocene have been reconstructed based on the results of paleobotanical analysis and radiocarbon dating of material from a section of peat deposit in the Mordovia State Nature Reserve. It has been shown that birch–pine forests were widespread in the region between 7000 and 5000 yr BP, with the frequency of fires in that period being high (the fire return interval ranged from 10–20 to 100 years). Beginning from 5000 yr BP and to the early 20th century, broadleaf forests were dominant, with the fire return interval increasing to 300–500 years or longer.     

Carbon Emission from the Surface of Coarse Woody Debris in Korean Pine Forests of Southern Primorye

Carbon dioxide fluxes from the surface of coarse woody debris (CWD) have been measured in Korean pine forests of the southern Sikhote-Alin mountain range. The seasonal dynamics of oxidative conversion of CWD carbon have been evaluated, and average values of the CO₂ emission rate have been determined for CWD fragments of three tree species at different stages of decomposition. The degree of decomposition is an important factor of spatial variation in CO₂ emission rate, and temporal variation in this parameter is adequately described by an exponential function of both CWD temperature and air temperature (R² = 0.65–0.75).     

Assessing groundwater quality and its sustainability in Joypurhat district of Bangladesh using GIS and multivariate statistical approaches

Sustainable groundwater quality is a key global concern and has become a major issue of disquiets in most parts of the world including Bangladesh. Hence, the assessment of groundwater quality is an important study to ensure its sustainability for various uses. In this study, a combination of multivariate statistics, geographical information system (GIS) and geochemical approaches was employed to evaluate the groundwater quality and its sustainability in Joypurhat district of Bangladesh. The results showed that the groundwater samples are mainly Ca–Mg–HCO₃ type. Principal component analysis (PCA) results revealed that geogenic sources (rock weathering and cation exchange) followed by anthropogenic activities (domestic sewage and agro-chemicals) were the major factors governing the groundwater quality of the study area. Furthermore, the results of PCA are validated using the cluster analysis and correlation matrix analysis. Based on the groundwater quality index (GWQI), it is found that all the groundwater samples belong to excellent to good water quality domains for human consumption, although iron, fluoride and iodide contaminated to the groundwater, which do not pose any significant health hazard according to World Health Organization’s and Bangladesh’s guideline values. The results of irrigation water quality index including sodium adsorption ratio (SAR), permeability index and sodium percentage (Na %) suggested that most of the groundwater samples are good quality water for agricultural uses. The spatial distribution of the measured values of GWQI, SAR, Fe (iron), EC (electrical conductivity) and TH (total hardness) were spatially mapped using the GIS tool in the study area.     

Influence of chlorsulfuron herbicide on size of microbial biomass in the soil

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｕｓｅｏｆｃｈｅｍｉｃａｌｓ,ｉｎｃｌｕｄｉｎｇｐｅｓｔｉｃｉｄｅｓ,ｈａｓｂｅｃｏｍｅａｎｉｎｔｅｇｒａｌａｎｄｅｃｏｎｏｍｉｃａｌｌｙｅｓｓｅｎｔｉａｌｐａｒｔｏｆｍｏｄｅｒｎａｇｒｉｃｕｌｔｕｒｅ.Ｐｅｓｔｉｃｉｄｅ?..     

Laboratory scale studies on removal of chromium from industrial wastes

Chromium being one of the major toxic pollutants is discharged from electroplating and chrome tanning processes and is also found in the effluents of dyes,paint pigments,manufacturing units etc.Chromium exists in aqueous systems in both trivalent(Cr^3 )and hexavalent (Cr^6 )forms.The hexavalent form is carcinogenic and toxic to aquatic life,whereas Cr^3 is however comparatively less toxic.This study was undertaken to investigate the total chromium removal from industial effluents by chemical means in order to achieve the Pakistan NEQS level of 1 mg/L by the methods of reduction and precipitation.The study was conducted in four phase Ⅰ,the optimum pH and cost effective reducing agent among the four popular commercial chemicals was selected.As a result,pH of 2 was found to be most suitable and sodium meta bisulfate was found to be the most cost effective reducing agent respectively.Phase Ⅱ showed that lower dose of sodium meta hisulfate was sufficient to obtain 100% efficiency in reducing Cr^6 to Cr^3 ,and it was noted that reaction time had no significance in the whole process.A design curve for reduction process was established which can act as a tool for treatment of industrial effluents.Phase Ⅲ studies indicated the best pH was 8.5 for precipitation of Cr^3 to chromium hydroxide by using lime.An efficiency of 100% was achievable and a settling time of 30 minutes produced clear effluent.Finally in Phase Ⅳ actual waste samples from chrome tanning and electroplating industries,when precipitated at pH of 12 gave 100% efficiency at a settling time of 30 minutes and confirmed that chemical means of reduction and precipitation is a feasible and viable solution for treating chromium wastes from industries.