Effect of Bag Failure on Baghouse Outlet Loading

One of the most important considerations in baghouse operation is the effect of bag failure on outlet loading. This information would be Of use to equipment manufacturers, users, and regulatory officials. Unfortunately, little information is available in the literature on this aspect of baghouse performance. Equations describing changes in outlet loading resulting from the sudden rupture of one or more bags are developed from first principles. Calculated results from these equations are presented in the form of a chart which can very quickly and simply be used to obtain a numerical value for a revised outlet loading resulting from bag failure(s) for a variety of system conditions. Due to an assumption made in the derivation, the new outlet loading thus obtained represents the maximum increase (worst case conditions) to be expected from the rupture of one or more bags. The following variables are included in the analysis: inlet loading, outlet loading (prior to bag failure), number of bag failures, bag diameter, system pressure drop; and gas temperature.     

Catalytic NOx reduction with simultaneous dioxin and furan oxidation

The engineering, construction, performance and running costs of a catalytic flue gas cleaning component in the low dust area of a municipal waste incinerator is discussed. For this purpose, the case study of a Flemish incineration plant is presented, covering the history, the design procedure of the catalyst, relevant process data and the financial aspects. A reliable PCDD/F-destruction by means of oxidation by the catalyst to typical values of 0.001 ng TEQ/Nm3 has been demonstrated. At the same time, NOx- and CO-emissions are reduced by 90% and 20% to about 50 mg/Nm3 and below 10 mg/Nm3, respectively.     

Non-metallic organic dyes as photosensitizers for dye-sensitized solar cells: a review

Environmental Science and Pollution Research - The advent of novel technologies has led to the need for environmental and economic integration. Energy consumption plays a vital role in human...     

Controlling the Flue-Fed Incinerator

This paper examines various health effects of photochemical air pollution in Japan, primarily through the review of epidemiological studies. Health effects discussed include subjective respiratory symptoms, respiratory function testing, ocular effects, and hospital diagnostic tests. The downward trend in oxidant cautions and paralleled health effects, as reported by the Japanese Environmental Agency, are discussed. The methods determined by Japanese ordinance for measurement of oxidants, SO₂, NO _x , and CO are described.     

Identification of dimethylchloroarsine near a former herbicide factory by headspace solid-phase microextraction gas chromatography-mass spectrometry

The application of an improved method based on multidetector gas chromatography to the determination of trace levels of organoarsines in complex matrices is described. The method using headspace-mode solid-phase microextraction (SPME) was applied to a carefully sampled and preserved freshwater sediment core obtained from central Green Bay, Lake Michigan. The sediment core was collected and fractionated in an inert atmosphere. A carboxen/ polydimethylsiloxane-coated SPME fiber (85 microm film thickness) was equilibrated (n = 4) for 60 min at 25 degrees C in the headspace of the sample vessel before introduction to the chromatograph. Conventional quadrupole ion trap mass spectrometry (electron impact ionization), electron capture detection, and pulsed flame photometric detection (arsenic mode) were employed for structure elucidation. A heretofore unidentified species in this region, dimethylchloroarsine (DMCA). was identified. The mass spectrum for DMCA is interpreted based on the observed fragmentation pattern. A bimodal vertical distribution of DMCA in the sediment core sample was observed and its interpretation based on Pb-210 dating is reported.     

Human exposure to 2,3,7,8-TCDD

This paper uses an environmental partitioning model to evaluate the concentration of 2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD) in various environmental media. These concentrations are then used to estimate the amount of TCDD entering the food chain and the average daily intake of TCDD by the general population of the US. The food chain accounts for 98% of human exposure to TCDD. The model estimated the average daily intake of TCDD to be 0.05 ng/day.     

Dissolution rates of three high explosive compounds: TNT,RDX, and HMX

Incidental exposure to high explosive compounds can cause subtle health effects to which a population could be more susceptible than injury by detonation. Proper source characterization is a key requirement in the conduct of risk assessments. For nonvolatile solid explosives, dissolution is one of the primary mechanisms that controls fate and transport, resulting in exposure to these compounds remote from their source. To date, information describing dissolution rates of high explosives has been sparse. The objective of this study was to determine the dissolution rates of three high explosive compounds, 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), in dilute aqueous solutions as a function of temperature, surface area, and energy input. To determine each variable's impact on dissolution rate, experiments were performed where one variable was changed while the other two were held constant. TNT demonstrated the fastest dissolution rate followed by HMX and then RDX. Dissolution rate correlation equations were developed for each explosive compound incorporating the three aforementioned variables, independently, and collectively in one correlation equation.     

Review of advances in the thin layer chromatography of pesticides: 2010–2012

Techniques and applications of thin layer chromatography (planar chromatography) for the separation, detection, qualitative and quantitative determination, and preparative isolation of pesticides and their metabolites and some related pollutants are reviewed for the period from November 1, 2010 to November 1, 2012. Analyses are described for a variety of samples types and pesticide classes. In addition to references on residue analysis, studies such as pesticide structure – retention relationships, identification and characterization of natural and synthesized pesticides, metabolism, degradation, mobility, lipophilicity, and mechanism of action are covered.