Metal inclusion in expanded clays

The possibility to include in expanded clay little amounts of metallic ions present in waste material, without significant influence on the environment, was investigated. In this article, known quantities of cadmium(II), lead(II), chromium(III), and chromium(VI) were added to a mixture of raw pit clay, adding a small amount of mineral oil. The resultant paste was heated at 1200°C, in conditions to provide the commercial product with the best characteristics of lightness. The obtained pellets were analyzed in two ways. A sample of expanded clay was crushed, added to with KNaCO₃ and melted. The melted mass, after cooling, was dissolved in HCl or in water and analyzed. The composition of the raw pit clay was analyzed as a blank. In parallel, pellets were subjected to a leaching process and the eluate was analyzed for the added cations. The concentration of the metal ions in the leached water is negligible compared with that generally admitted in drinking water.     

Successful genetic bioaugmentation with Pseudomonas putida for toluene degradation in soil columns

There is a strong need for effective and sustainable treatment methods for remediating soils and waters contaminated by fossil fuel pollutants such as aromatic hydrocarbons. Remediation could be improved by genetic bioaugmentation that uses conjugation of catabolic plasmids between bacteria. Research on the conditions for success, effectiveness, and long-term impact of genetic bioaugmentation are therefore necessary. Here the effects of genetic bioaugmentation with Pseudomonas putida BBC 443 was studied in continuous-flow soil columns with or without glucose amendment. Results show that the highest transconjugant occurrence of 21.7 ± 2.1 %, and development of microbial communities with the highest overall toluene degradation potential of 0.0790 ± 0.0055 mg toluene/g soil/h, were achieved in soil columns that received a continuous addition of 1 g/L glucose. Plasmid transfer and toluene biodegradation did not depend on the survival of donor P. putida BBC443, suggesting that genetic bioaugmentation was successful. Furthermore, bacterial community structure analysis revealed that genetic bioaugmentation had limited long-term impact on the soil bacterial community structures, regardless of the specific treatment. Our findings show that genetic bioaugmentation was successful and resulted in limited long-term ecological impact, thus demonstrating that genetic bioaugmentation can provide an effective and sustainable method for in situ bioremediation.     

A Sustainable Perspective for Macadamia Nutshell Residues Revalorization by Green Composites Development

Journal of Polymers and the Environment - Macadamia is a nut widely used globally in food, personal hygiene products, and human health. After removing the nut, high amounts of the shell residual,...     

Modifications of photochemical efficiency,cellular viability and total phenolic content of Prosopis glandulosa leaves exposed to copper

The effects of copper (Cu²⁺) on photochemical efficiency, cellular viability and total phenolic content in Prosopis glandulosa leaves were evaluated after 4, 8 or 12 h exposure to 0.1, 10 or 100 mM Cu²⁺ using the tissue tolerance test. The results showed that significant reductions (p<0.003) of photochemical efficiency in P. glandulosa leaves were found after 8 h exposure to 100 mM Cu²⁺ compared with controls leaves. The results also showed a significant increase (p<0.05) on electrolyte leakage values in P. glandulosa leaves after 4 h exposure to 100 mM Cu²⁺ compared with control leaves. Total phenolic content in P. glandulosa leaves only differed significantly when exposed 12 h to the highest concentration of Cu²⁺. These results suggest that Cu²⁺ can produce reactive oxygen species that may form hydroxyl radicals that damage proteins and lipids, which in turn causes loss of integrity and reduce photochemical efficiency of leaves. In conclusion, the photochemical efficiency and cellular viability analyses can be used as useful physiological tools to assess early changes in photosynthetic performance of P. glandulosa in response to copper pollution.     

Coastal hazard due to submarine canyons in active insular volcanoes: examples from Lipari Island (southern Tyrrhenian Sea)

The recent high-resolution multibeam bathymetry surveys around Lipari Island allowed to evidence several submarine canyons, whose head often cut back up to very shallow water and at a few tens of meters far from the coast. These canyons are mainly located in the eastern and southern side of the island and are characterized by an ongoing retrogressive (landward) erosion, that also controlled the shape and the evolution of the coastline. The canyon heads are formed by minor slide scars. By coupling slide scar morphometry and simple numerical model we have been able to roughly estimate the potential tsunami wave amplitudes generated by related slope failures. Moreover, the retrogressive erosion of canyon heads can be claimed as a cause of the enhanced subsidence reported in the last few thousand years in the eastern part of Lipari, where the main villages are located. Based on these evidence, we propose a first assessment of the coastal hazard due to marine retrogressive activity in the largest and most densely populated island of the Aeolian Archipelago.     

A three-component model of phytoplankton size class for the Atlantic Ocean

A three-component model was developed which calculates the fractional contributions of three phytoplankton size classes (micro-, nano- and picoplankton) to the overall chlorophyll-a concentration in the Atlantic Ocean. The model is an extension of the Sathyendranath et al. (2001) approach, based on the assumption that small cells dominate at low chlorophyll-a concentrations and large cells at high chlorophyll-a concentrations. Diagnostic pigments were used to infer cell size using an established technique adapted to account for small picoeukaroytes in ultra-oligotrophic environments. Atlantic Meridional Transect (AMT) pigment data taken between 1997 and 2004 were split into two datasets; 1935 measurements were used to parameterise the model, and a further 241 surface measurements, spatially and temporally matched to chlorophyll-a derived from SeaWiFS satellite data, were set aside to validate the model. Comparison with an independent global pigment dataset (256 measurements) also supports the broader-scale application of the model. The effect of optical depth on the model parameters was also investigated and explicitly incorporated into the model. It is envisaged that future applications would include validating multi-plankton biogeochemical models and improving primary-production estimates by accounting for community composition.     

On the geotechnical characterisation of the polluted submarine sediments from Taranto

This paper reports the results of the first geomechanical laboratory experiments carried out on the polluted submarine clayey sediments of the Mar Piccolo in Taranto (South of Italy). The study had to face with extreme difficulties for the very soft consistency of the sediments and the contaminants. The mineralogy, composition and physical properties of the sediments were analysed, along with their compression and shearing behaviour. The investigation involved sediments up to about 20 m below the seafloor, along three vertical profiles in the most polluted area of the Mar Piccolo, facing the Italian Navy Arsenal. The experimental results were used to derive a preliminary geotechnical model of the site, necessary for the selection and design of the most sustainable in situ mitigation solutions. Moreover, the experimental data reveal that the clayey sediments of the most polluted top layer do not follow the classical geotechnical correlations for normally consolidated deposits. This seems to open interesting perspectives about the effects of pollutants on the geotechnical behaviour of the investigated sediments.     

Monitoring an outdoor smoking area by means of PM<Subscript>2.5</Subscript> measurement and vegetal biomonitoring

The extension of pollutant accumulation in plant leaves associated with its genotoxicity is a common approach to predict the quality of outdoor environments. However, this approach has not been used to evaluate the environmental quality of outdoor smoking areas. This study aims to evaluate the effects of environmental tobacco smoke (ETS) by assessing particulate matter 2.5 μm (PM_2.5) levels, the pollen abortion assay, and trace elements accumulated in plant leaves in an outdoor smoking area of a hospital. For this, PM_2.5 was measured by active monitoring with a real time aerosol monitor for 10 days. Eugenia uniflora trees were used for pollen abortion and accumulated element assays. Accumulated elements were also assessed in Tradescantia pallida leaves. The median concentration of PM_2.5 in the smoking area in all days of monitoring was 66 versus 34 μg/m³ in the control area (P?<?0.001). In addition, the elements Al, Cd, Cu, Ni, Pb, Rb, Sb, Se, and V in Tradescantia pallida and Al, Ba, Cr, Cu, Fe, Mg, Pb, and Zn in Eugenia uniflora were in higher concentration in the smoking area when compared to control area. Smoking area also showed higher rate of aborted grains (26.1?±?10.7 %) compared with control (17.6?±?4.5 %) (P?=?0.003). Under the study conditions, vegetal biomonitoring proved to be an effective tool for assessing ETS exposure in outdoor areas. Therefore, vegetal biomonitoring of ETS could be a complement to conventional analyses and also proved to be a cheap and easy-handling tool to assess the risk of ETS exposure in outdoor areas.     

Ecosystem services and biodiversity conservation under forestation scenarios: options to improve management in the Vez watershed,NW Portugal

Ensuring forest protection and the delivery of forest ecosystem services is a central aim of the European Union’s biodiversity strategy for 2020. Therefore, accurate modelling and mapping of ecosystem services as well as of biodiversity conservation value is an important asset in support of spatial planning and policy implementation. The objectives of this study were to analyse the provision of the multiple ecosystem services under two forestation scenarios (eucalyptus/pine vs. oak) at the watershed scale and to evaluate their possible trade-offs with the biodiversity conservation value. The Vez watershed, in northwest Portugal, was used as case study area, in which soil and water assessment tool (SWAT) was applied to simulate the provision of hydrological services, biomass and carbon storage services. Biodiversity conservation value was based on nature protection regimes and on expert judgement applied to a land cover map. Results indicated large provision of ecosystem services in the high and low mountain sub-basins. The overall performance for water quantity and timing is better under the shrubland and oak forest scenarios, when compared to the eucalyptus/pine forest scenario, which perform better for flood regulation and erosion control services, especially in the low mountain sub-basin. The current shrubland dominated cover also shows good performance for the control of soil erosion. The oak scenario is the one with less trade-offs between forest services and biodiversity conservation. Results highlight SWAT as an effective tool for modelling and mapping ecosystem services generated at the watershed scale, thereby contributing to improve the options for land management.