Evolution of biodegradation of deinking by-products used as alternative cover material

Deinking by-products (DBP) have been used as alternative cover material for landfills and mine tailings. Since DBP is biodegradable because of its high cellulose and hemicellulose content, a laboratory experimental program was performed to monitor the evolution of biodegradation and changes in the physico-chemical and geotechnical properties of DBP samples submitted to accelerated biodegradation for 1460 days at 38 degrees C. The evolution of gas and leachate production was monitored in terms of both quality and quantity, which allowed for the calculation of mass loss with time. Under the conditions of the tests (no load applied), 19.6% of the mass was lost as gas, whereas 6.1% was leached out. The results show that biodegradation did not significantly alter the compaction behavior of DBP. The void ratio and water content increased significantly, while the volume of the samples slightly decreased. This seem to indicate that the porous structure of the samples was no longer the same after 1460 d of accelerated biodegradation. A slight increase in the relative density indicates that the organic/inorganic matter ratio increased. The results of permeability tests performed with samples at various stages of biodegradation and at various confining stresses show that the saturated hydraulic conductivity of recompacted biodegraded DBP decreased from 7 x 10(-7)cm/s to approximately 2 x 10(-7)cm/s, as biodegradation advanced.     

Ecotoxicological evaluation of the short term effects of fresh and stabilized textile sludges before application in forest soil restoration

The short term (eco)toxicity potential of fresh and stabilized textile sludges, as well as the short term (eco)toxicity of leachates obtained from both fresh and stabilized textile sludges, was evaluated by a battery of toxicity tests carried out with bacteria, algae, daphnids, fish, earthworms, and higher plants. The (eco)toxicological results showed that, after 120 d of stabilization, the experimental loading ratio of 25% sludge:75% soil (v/v) (equivalent to 64.4 ton/ha) did not significantly increase toxicity effects and increased significantly the biomass yield for earthworms and higher plants. The rank of biological sensitivity endpoints was: Algae approximately Plant biomass > Plant germination approximately Daphnids > Bacteria approximately Fish > Annelids. The lack of short term toxicity effects and the stimulant effect observed with higher plants and earthworms are good indications of the fertilizer/conditioner potential of this industrial waste, which after stabilization can be used in the restoration of a non-productive forest soil.     

Halophyte vegetation influences in salt marsh retention capacity for heavy metals

We analysed concentrations of Cu, Cd and Pb in above and belowground tissues of the halophyte species Halimione portulacoides and Spartina maritima, as well as in sediments and pore water between the roots in a Tagus estuary salt marsh (Portugal). From these results we calculated the pools of metals in the compartments mentioned above. Relative percentages of accumulation in each pool were also determined. Our aim was to determine how the type of vegetation in the salt marsh affects overall metal retention capacity of the system. It was concluded that areas colonised by H. portulacoides are potential sources of Cu, Cd and Pb to the marsh ecosystem, whereas areas colonised by S. maritima are more effective sinks at least for Cu and Cd. Consequently, S. maritima seems to contribute more effectively to the stabilisation of metals in salt marsh sediments, reducing their availability to the estuarine system.     

Volatile chlorinated hydrocarbons in Antarctic superficial snow sampled during Italian ITASE expeditions

In order to detect the presence of some volatile chlorinated hydrocarbons (VCHCs) and to understand their transport and deposition mechanism, superficial snow was sampled during two Italian ITASE (International Trans Antarctic Scientific Expedition) expeditions: the first traverse was carried out in 1998/1999 from Terra Nova Bay to Dome Concordia; the second traverse was carried out in 2001/2002 through Adélie, George V, Oates and Northern Victoria Lands. Some VCHCs (chloroform; 1,1,1-trichloroethane; tetrachloromethane; 1,1,2-trichloroethylene; tetrachloroethylene) were analysed using a highly sensitive and selective hyphenated technique composed of a purge-and-trap injector coupled to a gas chromatograph with a mass spectrometric detector (PTI-GC-MS) operating in SIM mode. Investigated VCHCs were present in all analysed snow samples with concentration levels of several units, tens, or sometimes hundreds of ng kg(-1). VCHC snow concentration levels remained approximately constant with changing distance from the coast and the comparison between fresh and aged snow did not show any substantial differences; on the basis of this evidence marine aerosol and dry deposition may be rejected as principal VCHC transport and deposition mechanism hypotheses. VCHC concentration levels in Antarctic snow samples were comparable to or greater than those found in snow from temperate zones.     

Validation of a passive atmospheric deposition sampler for polybrominated diphenyl ethers

An atmospheric deposition sampler was validated with respect to polybrominated diphenyl ethers (PBDEs), a compound group that is widely used as flame retardants in many types of consumer products. The deposition sampler consists of an adsorption cartridge that is connected to a glass funnel. Extraction tests with spiked cartridges using soxhlet extraction with acetone revealed recoveries of >80% for all of the investigated PBDEs. Once adsorbed, PBDEs are stable, as proven by extractions of spiked cartridges that were stored outdoors and collected after different periods of time, up to 84 days. High recoveries indicate that degradation of adsorbed PBDEs does not play a role under realistic field conditions. Bulk deposition rates of PBDEs were determined in a field test with 3 replicates, and a possible breakthrough of target compounds was assessed in the field using a second adsorption cartridge in series. No breakthrough of target compounds could be observed within a sampling period of 61 days, and a bulk deposition rate of approximately 1 ng m(-2) day(-1) for the sum of all analysed PBDEs was measured. The highest deposition rates were measured for octa-brominated congeners, followed by BDEs 99, 183, 153, and 47. Overall, the sampler was successfully validated regarding the atmospheric deposition of PBDEs.     

Agent-based integrated assessment modelling: the example of climate change

Current approaches to deal with the socio-economic implications of climate change rely heavily on economic models that compare costs and benefits of different measures. We show that the theoretical foundations underpinning current approaches to economic modelling of climate change are inappropriate for the type of questions that are being asked. We argue therefore that another tradition of modelling, social simulation, is more appropriate in dealing with the complex environmental problems we face today.     

A Flexible Global Warming Index for Use in an Integrated Approach to Climate Change Assessment

Global Warming Potential (GWP) is an index used to measure the cumulative radiative forcing of a tonne of greenhouse house gas (GHG) relative to that of a ‘reference’ gas (CO₂). Under the Kyoto Protocol, GWP can be used as a fixed index to govern the trade-off between different GHGs in a multi-gas approach to GHGs abatement. The use of fixed GWPs has been criticized for not being very cost effective compared to the use of some flexible indices. To gain wider acceptance, however, a flexible index must also prove to be easy to use, and the economic gains from its adoption must be significant. In this paper, we develop a flexible index based on the concept of marginal rather than cumulative or average global warming potentials. These marginal global warming potentials (MGWPs) can be endogenously determined within a climate model given a particular climate objective based on radiative forcing level. The MGPWs are then linked to the marginal abatement costs of the GHGs, which are also endogenously determined within an economic model. When the two concepts are linked in this way, the result is a cost-effective way of achieving a particular climate change objective with multigas abatement. We show that the savings in costs when using this flexible MGPWs can be significant, and more importantly, they are not uniformly distributed across different regions.

Polycyclic aromatic hydrocarbon concentrations,mutagenicity, and Microtox® acute toxicity testing of Peruvian crude oil and oil-contaminated water and sediment

The oil industry is a major source of contamination in Peru, and wastewater and sediments containing oil include harmful substances that may have acute and chronic effects. This study determined polycyclic aromatic hydrocarbon (PAH) concentrations by GC/MS, mutagenicity using TA98 and TA100 bacterial strains with and without metabolic activation in the Muta-ChromoPlate? test, and Microtox® 5-min EC₅₀ values of Peruvian crude oil, and water and sediment pore water from the vicinity of San José de Saramuro on the Marañón River and Villa Trompeteros on the Corrientes River in Loreto, Peru. The highest total PAH concentration in both areas was found in water (Saramuro?=?210.15 μg/ml, Trompeteros?=?204.66 μg/ml). Total PAH concentrations in water from San José de Saramuro ranged from 9.90 to 210.15 μg/ml (mean?=?66.48 μg/ml), while sediment pore water concentrations ranged from 2.19 to 70.41 μg/ml (mean?=?24.33 μg/ml). All water samples tested from Saramuro and Trompeteros sites, and one out of four sediment pore water samples from Trompeteros, were found to be mutagenic (P?<?0.001). One sediment pore water sample in Saramuro was determined to have a measurable toxicity (Microtox EC₅₀?=?335.1 mg/l), and in Trompeteros, the EC₅₀ in water and sediment pore water ranged from 25.67 to 133.86 mg/l. Peruvian crude oil was mutagenic using the TA98 strain with metabolic activation, and the EC₅₀ was 17.18 mg/l. The two areas sampled had very high PAH concentrations that were most likely associated with oil activities, but did not lead to acute toxic effects. However, since most of the samples were mutagenic, it is thought that there is a greater potential for chronic effects.