建筑材料隐含环境影响评估

我国建筑业快速发展,建筑开发使用大量的建筑材料给资源和环境带来严重负荷.以上海市为案例,运用生命周期评价方法,基于北京工业大学和Ecoinvent数据库中的建筑材料生产数据,采用ReCiPe法对上海市建筑物的材料隐含环境影响进行评估,并对未来的环境影响潜值进行预测.结果表明:在上海市居住建筑和非居住建筑所产生的各类环境影响中人类毒性、金属损耗最为突出,约占总环境影响的45%和20%;环境影响主要来源于钢筋和木材的生产,对各类环境影响贡献度分别约为47%、17%;高层居住建筑和非居住建筑中的工厂建筑物化环境影响在各自类型中所占比例最高.按现有趋势发展,2020年上海市居住建筑开发规模和环境影响潜值均将达到2014年的1.52倍,非居住建筑则可达到2014年的1.14倍.针对上海市建筑材料环境影响分析结果,为有效减轻上海市建筑物的环境影响,需重点关注钢筋、铝材、木材以及混凝土的生产,识别生产过程中污染物转移环节进而改进工序;在设计阶段考虑选择环境影响负荷低的绿色建材,如混凝土砌块、高性能混凝土等,从而降低环境影响;同时,应重点关注隐含环境负荷高的高层居住和工厂建筑类建筑,通过降低建材使用量等方案降低环境影响.      

Contribution of precursor compounds to the release of per- and polyfluoroalkyl substances (PFASs) from waste water treatment plants (WWTPs)

Per-and polyfluoroalkyl substances(PFASs) are ubiquitous in sludge and water from waste water treatment plants, as a result of their incorporation in everyday products and industrial processes. In this study, we measured several classes of persistent PFASs,precursors, transformation intermediates, and newly identified PFASs in influent and effluent sewage water and sludge from three municipal waste water treatment plants in Sweden, sampled in 2015. For sludge, samples from 2012 and 2014 were analyzed as well.Levels of precursors in sludge exceeded those of perfluoroalkyl acids and sulfonic acids(PFCAs and PFSAs), in 2015 the sum of polyfluoroalkyl phosphoric acid esters(PAPs) were 15–20 ng/g dry weight, the sum of fluorotelomer sulfonic acids(FTSAs) was 0.8–1.3 ng/g,and the sum of perfluorooctane sulfonamides and ethanols ranged from non-detected to 3.2 ng/g. Persistent PFSAs and PFCAs were detected at 1.9–3.9 ng/g and 2.4–7.3 ng/g dry weight, respectively. The influence of precursor compounds was further demonstrated by an observed substantial increase for a majority of the persistent PFCAs and PFSAs in water after waste water treatment. Perfluorohexanoic acid(PFHxA), perfluorooctanoic acid(PFOA), perfluorohexane sulfonic acid(PFHxS), and perfluorooctane sulfonic acid(PFOS)had a net mass increase in all WWTPs, with mean values of 83%, 28%, 37% and 58%,respectively. The load of precursors and intermediates in influent water and sludge combined with net mass increase support the hypothesis that degradation of precursor compounds is a significant contributor to PFAS contamination in the environment.     

Mesoporous carbon nanomaterials induced pulmonary surfactant inhibition, cytotoxicity, inflammation and lung fibrosis

Environmental exposure and health risk upon engineered nanomaterials are increasingly concerned. The family of mesoporous carbon nanomaterials(MCNs) is a rising star in nanotechnology for multidisciplinary research with versatile applications in electronics,energy and gas storage, and biomedicine. Meanwhile, there is mounting concern on their environmental health risks due to the growing production and usage of MCNs. The lung is the primary site for particle invasion under environmental exposure to nanomaterials. Here, we studied the comprehensive toxicological profile of MCNs in the lung under the scenario of moderate environmental exposure. It was found that at a low concentration of 10 μg/mL MCNs induced biophysical inhibition of natural pulmonary surfactant. Moreover, MCNs at similar concentrations reduced viability of J774 A.1 macrophages and lung epithelial A549 cells.Incubating with nature pulmonary surfactant effectively reduced the cytotoxicity of MCNs.Regarding the pro-inflammatory responses, MCNs activated macrophages in vitro, and stimulated lung inflammation in mice after inhalation exposure, associated with lung fibrosis.Moreover, we found that the size of MCNs played a significant role in regulating cytotoxicity and pro-inflammatory potential of this nanomaterial. In general, larger MCNs induced more pronounced cytotoxic and pro-inflammatory effects than their smaller counterparts. Our results provided valuable information on the toxicological profile and environmental health risks of MCNs, and suggested that fine-tuning the size of MCNs could be a practical precautionary design strategy to increase safety and biocompatibility of this nanomaterial.     

数显型电热板加热法在河流高锰酸盐指数应急监测中的应用研究

高锰酸盐指数常被作为地表水体受有机污染物和还原性无机物质污染程度的综合指标.采用数显型电热板加热法测定水中高锰酸盐指数,通过实验确定了加热时间和加热温度.并分别采用水浴法和电热板加热法对应急样品进行了高锰酸盐指数的测定,两种测定方法的比对研究结果表明,应急监测时采用数显型电热板加热法测定耗时更短,检测结果与国标法测定没有显著差异,是可行且有效的应急监测替代方法.     

管输油品静电监测设备在油库中的应用

介绍了装卸过程中油品静电产生机理,并对储罐内油品静电积聚造成的静电放电危险性进行了分析,总结了常用的油品静电安全控制措施。通过探讨管输油品静电量检测技术原理,设计了油品电荷量监测设备(油品电荷密度表),并应用于乙醇汽油装车过程中对油品静电的监测。为强化成品油输运、装卸过程中油品静电安全防护措施提供参考。     

基于实时交通信息的道路机动车动态排放清单模拟研究

以上海市为例开展了实际道路车流分布、行驶工况和车辆技术的实地调查,建立了道路车流、VSP分布和车辆技术数据库.在此基础上,基于实时的车流、车速等交通信息,构建了动态化的道路机动车污染物排放清单模拟方法,并开展了城区典型道路的机动车小时排放模拟案例研究.调查结果表明,上海市城区道路车流以轻型客车和出租车为主,分别占各时段车流总量的48%～72%和15%～43%;VSP分布与平均车速存在较好的规律,各车型VSP峰值随平均车速的上升向高负荷去移动,且峰值逐渐降低;当前上海市车辆以国2和国3车型为主,经过年检站调查结果的校正,国2和国3车型分别占各车型的11%～70%和17%～51%.模拟案例结果显示,道路机动车CO、VOC、NOx和PM日排放峰谷比可达3.7、4.6、9.6和19.8左右,CO和VOC排放主要来自轻型客车和出租车,与车流变化的相关性较好,而NOx和PM排放主要来自重型客车和公交车,且主要集中在早晚高峰时段.采用建立的动态排放模拟方法可实时反映实际道路的机动车排放变化,获取高排放路段和时段,为交通环境管理提供重要的技术手段和决策依据.     

2株降解菲的植物内生细菌筛选及其降解特性

为了获得具有菲降解特性的植物内生细菌,通过选择性富集培养,本研究从多环芳烃污染区植物体内分离得到2株能够降解液体培养基中高浓度菲(200 mg·L-1)的植物内生细菌(菌株P1和P3).经形态观察、生理生化特征鉴定和16S rDNA序列同源性分析,分别将菌株P1和P3鉴定为寡养单胞菌属(Stenotrophomonas sp.)和假单胞菌属(Pseudomonas sp.)的细菌.菌株P1和P3均为好氧生长,28℃、150 r·min-1摇床培养7 d,2株菌对无机盐培养基中菲(100 mg·L-1)的降解率均高于90%.条件实验表明,温度20～30℃,pH 6.0～8.0,盐含量0%～4%,装液量10～30 mL(100 mL三角瓶)2菌株生长良好且对菲降解率高于70%.其最适生长和降解温度为30℃,pH为7.0,盐含量≤4%,装液量≤30 mL.综合比较2株菌对菲的降解特性,P1菌株高温耐受性稍强,而P3菌株对环境pH改变和缺氧的耐受性稍强.     

直接大红4BE的磷钨酸均相光催化还原脱色

以磷钨酸(H3PW12O40,PW12)为光催化剂,异丙醇(Isopropanol)作为电子给体的条件下对偶氮染料直接大红4BE进行均相光催化还原脱色研究,考察PW12用量、IS浓度、直接大红4BE和盐浓度等因素的影响,结果表明杂多蓝(PW1-2)对直接大红4BE具有明显的还原脱色作用.pH=2.0,直接大红4BE初始浓度50 mg·L-1,PW12浓度为600 mg·L-1,IS浓度为0.13mol·L-1,50 min直接大红4BE的脱色率可达到90.39%.4BE的光催化还原脱色速率随PW12和IS浓度的增加而增加,最后趋于恒定;直接大红4BE初始浓度增加,其光反应一级速率常数降低;PW12、IS和4BE浓度之间存在交互影响.离子强度增加,4BE脱色速率减小,表现为负的盐效应,推测4BE与光反应生成的杂多蓝(PW1-2)进行复合,然后发生电子转移引起偶氮染料还原脱色和杂多蓝氧化复原.本研究结果表明PW12/IS/UV能够有效用于偶氮染料直接大红4BE的还原脱色处理.     

煤矿酸性矿井水处理方法研究

某些煤炭资源的开采不可避免地将伴随着含铁、锰酸性矿井水的外排。论述了含铁、锰酸性矿井水的形成机制,对中和法、人工湿地法、微生物法等几种酸性矿井水处理工艺进行比选,提出了适宜以中和法为主体对煤矿酸性矿井水进行处置,并对石灰石中和法、石灰中和法、石灰石-石灰联合中和法处理酸性矿井水进行了分析研究。     

基于遥感监测的黄海绿潮漂移路径及分布面积特征分析

本文利用2008～2012年的多源卫星遥感序列图像,动态监测各年绿潮发生的漂移路径、影响海域面积,得到各年绿潮漂移趋势、分布面积和最大分布面积出现时间。根据监测结果,划分出影响绿潮漂移路径的关键区域,并分析了2008、2009和2010年关键区域内各年绿潮漂移方向和面积变化情况。