Empirical Estimation of Virtual Point Source Height Over a Bank of Coke Ovens

This paper addresses an empirical method of assessment of the height of a virtual point source. In order to achieve such assessment, three planes defining the location of a virtual point source in a space are created and formulas describing the geometry of observer’s sight and plume orientation are used. Data for calculations are obtained on a basis of plume photographs. The final position of a virtual emission point is described by a set of its coordinates in the Cartesian coordinate system. Presented method may be applied as a means to verify and validate the existing formulas describing the rise of plume above the stack exit or as a tool enabling acquisition of information for the sake of creating new formulas of this type. The calculation of the location of a virtual point source ascribed to the point emission from the roof of the bank of coke oven is presented and illustrated with photographs which reveal position of plume, adequate planes, axes and characteristic objects.     

Spatial Validation of Land Use Change Models Using Multiple Assessment Techniques: A Case Study of Transition Potential Models

Using land use and cover change (LUCC) models for the urban growth planning, environmental assessment, and decision-making needs the establishment of an appropriate level of confidence in their performance. The objective of this research is to explore the importance of using multiple assessment techniques in order to fairly evaluate the performance of land use models. An application is conducted by using the Land Change Modeler for Ecological Sustainability (LCM) which is an empirical and transition potential model. LCM is applied to model the agricultural to developed areas transition in Rennes metropolitan area (France). The land demand is estimated using the Markov Chain model; whereas, the transition potential map is implemented using the Multi-Layer Perceptron Neural Network (MLP) method based on historical changes and driving variables. The model performance is assessed based on a variety of the most commonly used validation techniques. At the study area level, the correctness and disagreement analysis shows that LCM performs better at predicting the amount than the allocation of developed areas. Additionally, landscape metrics reveal that LCM tends to predict a fragmented urban form, which seems evident because of the large number of the individual urban patches. At the municipality level, the error budget analysis shows that the model performance, which varies highly between different subareas, needs to be improved. Moreover, the cross-tabulation between the transition potential map and both the observed and the predicted agricultural to developed areas transitions reveals that the order of the transition potential values does not perfectly fit the observed change; whereas, the predicted change is not solely limited to areas with high potential.     

Mercury Air Emission from Coal-Fired Public Power Sector: Uncertainty and Its Monthly Distribution. Case Study from Poland

The paper presents two aspects concerned with the mercury air emission inventory from coal-fired public power and energy plants: an uncertainty analysis, using Monte Carlo simulation (Journal of the American Statistical Association, 44(247), 335–341 1949) and the monthly distributions applying the Denton-Cholette approach (Dagum & Cholette 2006). The analysis determines uncertainty about the estimates mercury air emission from 1990 to 2012 including the development of air pollution control (APC) technologies in the Polish public power and energy sector, also the monthly distributions in comparison with previously obtained results (H?awiczka 2008). The uncertainty of mercury (Hg) content in fuel is 31.6% for hard coal and 42.4% for brown coal. The confidence interval for the estimated emission changed from [kg] (16,082.2; 16,242.2) in 1990 to (10,525.9;10,671.1) in 2012. However, the Denton-Cholette approach overestimates the emissions for the warmer periods of the year, but it could, however, in our view, be applied to attain the monthly distributions.     

Assessing regulatory violations of disinfection by-products in water distribution networks using a non-compliance potential index

Inactivating pathogens is essential to eradicate waterborne diseases. However, disinfection forms undesirable disinfection by-products (DBPs) in the presence of natural organic matter. Many regulations and guidelines exist to limit DBP exposure for eliminating possible health impacts such as bladder cancer, reproductive effects, and child development effects. In this paper, an index named non-compliance potential (NCP) index is proposed to evaluate regulatory violations by DBPs. The index can serve to evaluate water quality in distribution networks using the Bayesian Belief Network (BBN). BBN is a graphical model to represent contributing variables and their probabilistic relationships. Total trihalomethanes (TTHM), haloacetic acids (HAA5), and free residual chlorine (FRC) are selected as the variables to predict the NCP index. A methodology has been proposed to implement the index using either monitored data, empirical model results (e.g., multiple linear regression), and disinfectant kinetics through EPANET simulations. The index’s usefulness is demonstrated through two case studies on municipal distribution systems using both full-scale monitoring and modeled data. The proposed approach can be implemented for data-sparse conditions, making it especially useful for smaller municipal drinking water systems.     

Assessment of physicochemical parameters and prevalence of virulent and multiple-antibiotic-resistant <Emphasis Type="Italic">Escherichia coli</Emphasis> in treated effluent of two wastewater treatment plants and receiving aquatic <Emphasis Type="Italic">milieu</Emphasis> in Durban,South Africa

The poor operational status of some wastewater treatment plants often result in the discharge of inadequately treated effluent into receiving surface waters. This is of significant public health concern as there are many informal settlement dwellers (ISDs) that rely on these surface waters for their domestic use. This study investigated the treatment efficiency of two independent wastewater treatment plants (WWTPs) in Durban, South Africa and determined the impact of treated effluent discharge on the physicochemical and microbial quality of the receiving water bodies over a 6-month period. Presumptive Escherichia coli isolates were identified using biochemical tests and detection of the mdh gene via PCR. Six major virulence genes namely eae, hly, fliC, stx1, stx2, and rfbE were also detected via PCR while antibiotic resistance profiles of the isolates were determined using Kirby-Bauer disc diffusion assay. The physicochemical parameters of the wastewater samples ranged variously between 9 and 313.33 mg/L, 1.52 and 76.43 NTUs, and 6.30 and 7.87 for COD, turbidity, and pH respectively, while the E. coli counts ranged between 0 and 31.2?×?10³ CFU/ml. Of the 200 selected E. coli isolates, the hly gene was found in 28 %, fliC in 20 %, stx2 in 17 %, eae in 14 %, with stx1 and rfbE in only 4 % of the isolates. Notable resistance was observed toward trimethoprim (97 %), tetracycline (56 %), and ampicillin (52.5 %). These results further highlight the poor operational status of these WWTPs and outline the need for improved water quality monitoring and enforcement of stringent guidelines.     

Effect of air-drying and oven-drying treatment on Cr(VI) content and Cr bond forms in soil

Air-drying and oven-drying are pretreatment processes often used before testing and analyzing various soil characteristics in the laboratory. This study selected three kinds of soil, including red soil, entisol, and alluvial soil, and examined the variation of the Cr(VI) content and Cr bond forms in these soils during air-drying and oven-drying. The results show that when the soil is air-dried in natural environment, the Cr(VI) content decreases with air-drying time. On day 10 of air-drying, the Cr(VI) content in these soils is 22.8～47.9 % of the initial value. When the soil is oven-dried, the Cr(VI) concentration decays faster; on day 8, the Cr(VI) is no longer detected in these soil samples. When the Cr(VI)-contaminated soil is treated by air-drying and oven-drying, the Cr bond form converts into a more stable form. After oven-drying, the Cr mainly exists in Fe–Mn oxide form, organic bond form, and residual form. The air-drying and oven-drying pretreatment processes of soil reduce the Cr(VI) content and stabilize the Cr bond form. If the laboratory analytic results are applied to risk analysis or remediation strategy planning for chromium-contaminated soil, the toxicity, bioavailability, and mobility of Cr in soil may be underrated.     

Atmospheric depositional fluxes and sources apportionment of organochlorine pesticides in the Pearl River Delta region, South China

Organochlorine pesticides (OCPs) have variously been phased out in agricultural activities, but they are still widely detected in air, water, and soil systems due to their recalcitrant nature in the environment. The purposes of this study were to assess potential OCP pollution via dry and wet deposition over the fast developing Pearl River Delta area with 41,700 km², where the main effort has been focused on emerging pollutants such as petroleum hydrocarbons and PM2.5. We quantified both the dry and wet deposition fluxes of 19 OCPs including dichlorodiphenyltrichloroethanes (DDTs), endosulfans (Endos), and hexachlorocyclohexanes (HCHs). The results showed that each year about 67.4, 42.0, 15.0, and 8.07 kg of total OCPs, DDTs, Endos, and HCHs were returned to the ground, among which 11.7, 10.4, 0.84, and 0.16 kg were in the dry deposition forms. The large spatial variations in OCP deposition fluxes indicated that OCP pollution in the air is mainly influenced on local scales because evaporation from local soil is likely the major source of the phased out OCPs. Source analysis indicated that DDTs may be still in use as antifouling agent and/or dicofol, but Endos and HCHs were mainly derived from the residual of historical usage. The study suggests that the historical OCP pollutants are persistent at high levels in this area and should not be overlooked, while we tackle emerging pollutants.     

Seasonal variations of monocarbonyl and dicarbonyl in urban and sub-urban sites of Xi’an,China

Seventeen airborne carbonyls including monocarbonyls and dicarbonyls were determined in urban and sub-urban sites of Xi’an, China in three seasons in 2010. In winter, acetone was the most abundant carbonyl in the urban site due to usage of organic solvents in constructions and laboratories and its slower atmospheric removal mechanisms by photolysis and reaction with hydroxyl radical than those of formaldehyde and acetaldehyde. In the sub-urban site, acetaldehyde was the most abundant carbonyl, followed by formaldehyde and acetone. During summer, however, formaldehyde was the most dominant carbonyl in both sites. The photooxidations of a wide range of volatile organic compounds (VOCs) yielded much more formaldehyde than other carbonyls under high solar radiation and temperature. In the urban site, the average concentrations of dicarbonyls (i.e., glyoxal and methyglyoxal) in spring and summer were higher than that in winter. Transformation of aromatic VOCs emitted from fuel evaporation leads to the formation of 1,2-dicarbonyls. A reverse trend was observed in sub-urban sites, as explained by the relatively low abundances and accumulations of VOC precursors in the rural atmosphere during warm seasons. Moreover, cumulative cancer risk based on measured outdoor carbonyls (formaldehyde and acetaldehyde) in Xi’an Jiaotong University and Heihe was estimated (8.82?×?10^?5 and 4.96?×?10^?5, respectively). This study provides a clear map on the abundances of carbonyls and their source interpretation in the largest and the most economic city in Northwestern China.     

Occurrence,sources, and ecological risks of PBDEs,PCBs, OCPs,and PAHs in surface sediments of the Yangtze River Delta city cluster,China

Polybrominated diphenyl ethers (PBDEs), organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs) in 25 surface sediments in three cities (Nantong, Wuxi, and Suzhou) in the Yangtze River Delta, eastern China were measured. The mean concentrations were 378, 45.8, 1.98, 4,002 ng/g for PBDEs, OCPs, PCBs, and PAHs, respectively. Their levels in the sediments in the three cities were generally consistent with the city industrialization. PBDEs and OCPs were markedly dominated by deca-BDE (>90 %) and DDTs (>70 %). A principle component analysis of the analytes identified three major factors suggesting different sources of the contaminants in the sediments. PBDEs and the organic carbon in the sediments have common sources from industrial activities; whereas OCPs and PCBs, correlated with the second factor, were mainly from historical sources. The third factor with loadings of PAHs is indicative of various combustion sources. Ecological risk assessment indicated that the potential highest risk is from DDTs, for which 22 sites exceed the effects range low (ERL) values and three sites exceed the effects range median (ERM) value.     

Mitigation Costs in a Globalized World: Climate Policy Analysis with REMIND-R

Within this paper, we present the novel hybrid model REMIND-R and its application in a climate policy context based on the EU target to avoid a warming of the Earth’s atmosphere by more than 2°C compared to the pre-industrial level. This paper aims to identify necessary long-term changes in the energy system and the magnitude of costs to attain such a climate protection target under different designs of the post-2012 climate policy regime. The regional specification of mitigation costs is analyzed in the context of globalization where regions are linked by global markets for emission permits, goods, and several resources. From simulation experiments with REMIND-R, it turns out that quite different strategies of restructuring the energy system are pursued by the regions. Furthermore, it is demonstrated that the variance of mitigation costs is higher across regions than across policy regimes. First-order impacts, in particular, reduced rents from trade in fossil resources, prevail regardless of the design of the policy regime.