饱和粉末活性炭电化学再生研究

采用电化学再生法对吸附处理染料废水产生的饱和粉末活性炭(PAC)进行再生,以NaCl为电解质,考察了电源类型、pH、再生时间、电压和NaCl浓度对活性炭再生率的影响,并对活性炭表面酸性含氧官能团进行测定。结果表明:(1)在pH=1、直流电压为6V、NaCl为6g/L、再生90min的最佳条件下,采用单室反应器,饱和PAC再生率达到59.09%。(2)电极循环伏安曲线结果表明,饱和PAC电极表面发生氧化反应,与主电极直接和间接氧化共同作用,使活性炭表面吸附的污染物降解。活性炭表面酸性含氧官能团滴定和红外光谱测试结果进一步表明,电化学再生法使活性炭表面基团得到恢复。     

喀斯特生态环境治理下土壤保持功能对石漠化的响应机制

喀斯特地区土壤保持功能是衡量石漠化生态治理成效的重要手段之一,基于InVEST模型,利用"3S"技术对2005、2010、2015年的关岭-贞丰花江示范区的石漠化进行解译,研究石漠化与土壤保持量两者的响应机制。结果表明:(1)2005～2015年石漠化程度总体减缓,面积由3 773.56 hm~2减少至3 474.23 hm~2,土壤保持总量相继上升,从29.29万t提高至37.29万t,2005～2010年单位面积土壤保持增量集中在6～30 t·hm~(-2)·a~(-1),后五年增量在0～6 t·hm~(-2)·a~(-1)。(2)由于土地利用方式、坡度、土层厚度等差异,土壤保持功能并未呈现简单式下降,而是表现为强度中度、轻度潜在、非喀斯特无石漠化。其中轻度与潜在差值最大,可达5.53 t·hm~(-2)·a~(-1),说明了潜在石漠化是今后治理的重点。(3)2005～2010年石漠化恢复型土壤保持增量为10.27 t·hm~(-2)·a~(-1),由于土地利用方式的转变以及治理时效性在2010～2015年降低为3.01 t·hm~(-2)·a~(-1)。稳定型石漠化变化土壤保持变化最为平稳,强度石漠化减缓区土壤保持功能上升快,轻度最为平缓,表明了治理期长且需循序渐进。因而,在治理过程中需考虑不同等级石漠化具有的土壤保持功能特性及其恢复的时效性。     

面向县域尺度SDG 15.1.2的生物多样性重要区域遥感识别和量化评估——以德清县为例

联合国2030年可持续发展目标(SDG)中指标15.1.2由于元数据的尺度和可用性的问题,无法有效应用于县域尺度的评估。针对这一问题,利用遥感的数据及相关模型,基于县域尺度指标计算的考虑,从生物多样性的内涵出发,构建了一套生物多样性遥感评估指标体系,成功识别了案例区域生物多样性重要场地,实现了县域尺度SDG 15.1.2的量化计算。结果表明,研究区德清县在SDG 15.1.2实施情况良好,构造的生物多样性指数能够有效地监测县域尺度生物多样性状况及其变化。研究为SDG 15.1.2的评估提供了一种可操作的有效方法,为基层行政区域实现可持续发展的规划提供精准的参考信息。     

浅埋富含水砂层盾构下穿敏感性建筑水平冻结+短钢箱接收技术∗

盾构始发与接收是盾构法隧道施工的关键风险点,以常州地铁1号线一期工程博爱路站-常州火车站区间下行线盾构接收工程为例,隧道下穿常州火车站站厅,隧道顶部距地下大厅结构底板仅3.75 m,受地面条件限制采用水平冻结加固方式。通过对冻结温度场、卸压孔压力及车站底板隆起进行跟踪监测与分析,结果表明:受地下水影响温度下降缓慢,车站底板因冻胀隆起较大,最大隆起处位于隧道端头中心线处约为46 mm,且底板隆起值与测点温度的变化密切相关;为防止温度低引起冻胀过大造成上部结构破坏,采取在冻结壁外围适度卸水进行卸压措施;在冻结壁交圈但厚度尚未完全达到冻结设计要求情况下,提出加装短钢箱装置进行盾构接收。实践表明,适度卸压水平冻结+加装短钢箱接收方式密封止水效果良好,安全可靠,可为今后类似工程提供可行技术。     

国内外牵引变压器过负荷计算区别

对国内外牵引变压器过负荷要求进行了分析,结合本单位实际遇到的过负荷计算实例,通过计算及试验验证了铁路牵引变压器过负荷能力对变压器设计的影响。     

Can we gain precision by sampling with probabilities proportional to size in surveying recent landscape changes in the Netherlands?

Seventy-two squares of 100 ha were selected by stratified random sampling with probabilities proportional to size (pps) to survey landscape changes in the period 1996–2003. The area of the plots times the urbanization pressure was used as a size measure. The central question of this study is whether the sampling with probabilities proportional to size leads to gain in precision compared to equal probability sampling. On average 1.03 isolated buildings per 100 ha have been built, while 0.90 buildings per 100 ha have been removed, leading to a net change of 0.13 building per 100 ha. The area with unspoiled natural relief has been reduced by 2.3 ha per 100 ha, and the length of linear relicts by 137 m per 100 ha. On average 74 m of linear green elements have been planted per 100 ha, while 106 m have been removed, leading to a net change of −31 m per 100 ha. For the state variables ‘unspoiled natural relief', ‘ linear relicts', ‘removed linear green elements', and ‘new – removed linear green elements' there is a gain in precision due to the pps-sampling. For the remaining state variables there is no gain or even a loss of precision (`new buildings', ‘removed buildings', ‘new – removed buildings', ‘new linear green elements'). Therefore, if many state variables must be monitored or when interest is not only in the change but also in the current totals, we recommend to keep things simple, and to select plots with equal probability.     

Spatial and Temporal Variations in Trace Metal Concentrations in the Cockle, Austrovenus Stutchburyi from Otago, New Zealand

This is the first comprehensive study of sources of variation in metal concentrations within the whole tissues of a shallow burrowing, filter-feeding intertidal clam, Austrovenus stutchburyi. Samples were collected from 12 sites in April, August, November and February in 1993–1994 in the vicinity of Otago Harbour and Peninsula, New Zealand. Total tissue trace metal concentrations (μg g⁻¹ dry weight) were measured in individual animals for the essential metals : Mn, Cu, Zn, Ni and the non-essential Cr using trace-metal clean acid-digestion and ICP-OAES techniques. Average metal concentrations were 3–60 μg g⁻¹ for Cu, 40–118 μg g⁻¹ for Zn, 2–12 μg g⁻¹ for Mn, 5–35 μg g⁻¹ for Ni and 1–44 μg g⁻¹ for Cr. These levels decreased with body weight and differed amongst sites except for Cr in February (mid-summer). Highest concentrations occurred at sites close to a city (Dunedin) and within the central harbour region although the Cu, Zn, Ni and Cr concentrations did not correlate with the environmental gradient or season. At one coastal site, samples of both the blue mussel Mytilus galloprovincialis and cockles gave similar trends in trace metal levels. These results suggest that the cockle could be a useful trace metal biomonitor within NZ estuaries.     

Point Sampling Digital Imagery with ‘Samplepoint’

Measuring percent occurrence of objects from digital images can save time and expense relative to conventional field measurements. However, the accuracy of image analysis had, until now, not reached the level of the best conventional field measurements. Additionally, most image-analysis software programs require advanced user training to successfully analyze images. Here we present a new software program, ‘SamplePoint,’ that provides the user a single-pixel sample point and the ability to view and identify the pixel context. We found SamplePoint to allow accuracy comparable with the most accurate field-methods for ground-cover measurements. Expert use of the program requires minimal training and its ease of use allows rapid measurements from image data. We recommend SamplePoint for calibrating the threshold-detection level of image-analysis software or for making direct measurements of percent occurrence from digital images.     

Characterization of Benthic Communities and Physical Habitat in the Stanislaus, Tuolumne, and Merced Rivers, California

The primary goal of this study was to characterize physical habitat and benthic communities (macroinvertebrates) in the Stanislaus, Tuolumne and Merced Rivers in California’s San Joaquin Valley in 2003. These rivers have been listed as impaired water bodies (303 (d) list) by the State of California due to the presence of organophosphate (OP) insecticides chlorpyrifos and diazinon, Group A pesticides (i.e., organochlorine pesticides), mercury, or unknown toxicity. Based on 10 instream and riparian physical habitat metrics, total physical habitat scores in the Stanislaus River ranged from 124 to 188 (maximum possible total score is 200). The highest total habitat score was reported at the upstream site. Tuolumne River physical habitat scores ranged from 86 to 167. Various Tuolumne River physical habitat metrics, including total habitat score, increased from downstream to upstream in this river. Merced River physical habitat scores ranged from 121 to 170 with a significant increase in various physical habitat metrics, including total habitat score, reported from downstream to upstream. Channel flow (an instream metric) and bank stability (a riparian metric) were the most important physical habitat metrics influencing the various benthic metrics for all three rivers. Abundance measures of benthic macroinvertebrates (5,100 to 5,400 individuals) were similar among the three rivers in the San Joaquin watershed. Benthic communities in all three rivers were generally dominated by: (1) Baetidae species (mayflies) which are a component of EPT taxa generally considered sensitive to environmental degradation; (2) Chironomidae (midges) which can be either tolerant or sensitive to environmental stressors depending on the species; (3) Ephemerellidae (mayflies) which are considered sensitive to pollution stress; and (4) Naididae (aquatic worms) which are generally considered tolerant to environmental stressors. The presence of 117 taxa in the Stanislaus River, 114 taxa in the Tuolumne River and 96 taxa in the Merced River implies that the benthic communities in these streams are fairly diverse but without a clear definition of benthic community expectations it is unknown if these water bodies are actually impaired.     

A Rapid Method for Assessing the Environmental Performance of Commercial Farms in the Pampas of Argentina

The generation of reliable updated information is critical to support the harmonization of socio-economic and environmental issues in a context of sustainable development. The agro-environmental assessment and management of agricultural systems often relies on indicators that are necessary to make sound decisions. This work aims to provide an approach to (a) assess the environmental performance of commercial farms in the Pampas of Argentina, and (b) propose a methodological framework to calculate environmental indicators that can rapidly be applied to practical farming. 120 commercial farms scattered across the Pampas were analyzed in this study during 2002 and 2003. Eleven basic indicators were identified and calculation methods described. Such indicators were fossil energy (FE) use, FE use efficiency, nitrogen (N) balance, phosphorus (P) balance, N contamination risk, P contamination risk, pesticide contamination risk, soil erosion risk, habitat intervention, changes in soil carbon stock, and balance of greenhouse gases. A model named Agro-Eco-Index was developed on a Microsoft-Excel support to incorporate on-farm collected data and facilitate the calculation of indicators by users. Different procedures were applied to validate the model and present the results to the users. Regression models (based on linear and non-linear models) were used to validate the comparative performance of the study farms across the Pampas. An environmental dashboard was provided to represent in a graphical way the behavior of farms. The method provides a tool to discriminate environmentally friendly farms from those that do not pay enough attention to environmental issues. Our procedure might be useful for implementing an ecological certification system to reward a good environmental behavior in society (e.g., through tax benefits) and generate a commercial advantage (e.g., through the allocation of green labels) for committed farmers.