富氧条件下选择性还原NO的复合催化剂体系

选择性催化还原法是净化稀燃汽车尾气中NOx 的最有效途径之一 ,单一催化组分或单一类型的催化剂很难满足实际需要 ,复合催化剂的研究成为必然趋势。本文介绍了复合催化体系的组合形式 ,回顾了国内外最近几年复合催化剂体系净化NOx 的研究成果 ,为将来设计新的复合催化体系提出了建议     

Air pollution and its control in China

The rapid growth of China’s economy has led to severe air pollution characterized by acid rain, severe pollution in cities, and regional air pollution. High concentrations are found for various pollutants such as sulfur dioxides (SO₂), nitrogen oxides (NO_x), and fine particulates. Great efforts have thus been undertaken for the control of air pollution in the country. This paper discusses the development and application of appropriate technologies for reducing the major pollutants produced by coal and vehicles, and investigates air quality modeling as an important support for policy-making.     

城市热岛的遥感研究

随着城市建设事业的发展以及人为热释放的增多，城市热岛效应呈现不断增强趋势。将遥感技术与常规城市热岛监测方法结合起来，才能深入进行城市热岛监测研究。通过回归分析建立一定模式，将遥感手段获得的辐射温度（亮温）转换为常规方法所用的空气温度（气温）是城市热岛遥感研究的主要思路和方法。以武汉市城市热岛分析为例，本文探讨了城市覆盖层与边界层的热岛形成因子，城市热岛效应直接或间接对城市其他气候要素产生多种影响，并对城市居民生产生活和健康带来有利和不利的因素。     

高效原油降解菌筛选驯化实验研究

由含油废水原有微生物种群中分离出纯种菌株，通过纯种菌株的单一菌种降解性能实验，混合菌株垢正交性能实验，筛选出7种高效原油降解菌（包括芽孢杆菌属，黄杆菌属，黄单胞菌属，和假单胞菌属），其中芽孢杆菌属降解原油能力最强，对于18．4mg/L的含油废水，降解去除率高达94％－95％，实验还表明，单种菌株降解原油的能力比混合菌株要好。     

北京市表层浮土和水体底泥中汞的赋存形态及其相互关系

应用分级萃取法测定了12个北京市表层浮士和3个水体底泥中汞的赋存形态,并应用多元统计分析对其相互关系进行了研究.北京市表层浮土中汞的含量分布变异较大,但其趋势为:残渣态>强有机结合态>水溶态>其它形态.各形态汞含量主要取决于上壤和底泥中汞含量的大小,其次才是环境因素.强有机结合态和残渣态是主要的赋存形态,对汞在土壤和底泥中的固定起着重要的作用.较易移动的水溶态、FA结合态和交换态对汞在环境中的迁移转化也有一定的影响.盐酸提取态汞主要包括水溶态、交换态、FA结合态和碳酸盐结合态.     

Bimetallic atomic site catalysts for CO2 reduction reactions: a review

Environmental Chemistry Letters - Carbon neutral becomes one of the most important environmental goals due to the excessive emission of CO2. The reduction of CO2 into valuable chemicals or fuels is...     

Impact of anthropogenic heat emissions on meteorological parameters and air quality in Beijing using a high-resolution model simulation

• The Large scale Urban Consumption of energY model was updated and coupled with WRF. • Anthropogenic heat emissions altered the precipitation and its spatial distribution. • A reasonable AHE scheme could improve the performance of simulated PM_2.5. • AHE aggravated the O₃ pollution in urban areas. Anthropogenic heat emissions (AHE) play an important role in modulating the atmospheric thermodynamic and kinetic properties within the urban planetary boundary layer, particularly in densely populated megacities like Beijing. In this study, we estimate the AHE by using a Large-scale Urban Consumption of energY (LUCY) model and further couple LUCY with a high-resolution regional chemical transport model to evaluate the impact of AHE on atmospheric environment in Beijing. In areas with high AHE, the 2-m temperature (T₂) increased to varying degrees and showed distinct diurnal and seasonal variations with maxima in night and winter. The increase in 10-m wind speed (WS₁₀) and planetary boundary layer height (PBLH) exhibited slight diurnal variations but showed significant seasonal variations. Further, the systematic continuous precipitation increased by 2.1 mm due to the increase in PBLH and water vapor in upper air. In contrast, the precipitation in local thermal convective showers increased little because of the limited water vapor. Meanwhile, the PM_2.5 reduced in areas with high AHE because of the increase in WS₁₀ and PBLH and continued to reduce as the pollution levels increased. In contrast, in areas where prevailing wind direction was opposite to that of thermal circulation caused by AHE, the WS₁₀ reduced, leading to increased PM_2.5. The changes of PM_2.5 illustrated that a reasonable AHE scheme might be an effective means to improve the performance of PM_2.5 simulation. Besides, high AHE aggravated the O₃ pollution in urban areas due to the reduction in NO_x.     

Hygroscopicity of particles generated from photooxidation of α-pinene under diferent oxidation conditions in the presence of sulfate seed aerosols

Smog chamber experiments were conducted to investigate the hygroscopicity of particles generated from photooxidation of α-pinene/NOx with diferent sulfate seed aerosols or oxidation conditions. Hygroscopicity of particles was measured by a tandem diferential mobility analyzer(TDMA) in terms of hygroscopic growth factor(Gf), with a relative humidity of 85%. With sulfate seed aerosols present, Gf of the aerosols decreased very fast before notable secondary organic aerosols(SOA) formation was observed, indicating a heterogeneous process between inorganic seeds and organic products might take place as soon as oxidation begins, rather than only happening after gas-aerosol partition of organic products starts. The final SOA-coated sulfate particles had similar or lower Gf than seed-free SOA. The hygroscopicity of the final particles was not dependent on the thickness but on the hygroscopicity properties of the SOA, which were influenced by the initial sulfate seed particles. In the two designed aging processes, Gf of the particles increased more significantly with introduction of OH radical than with ozone. However, the hygroscopicity of SOA was very low even after a long time of aging, implying that either SOA aging in the chamber was very slow or the Gf of SOA did not change significantly in aging. Using an aerosol composition speciation monitor(ACSM) and matrix factorization(PMF) method, two factors for the components of SOA were identified, but the correlation between SOA hygroscopicity and the proportion of the more highly oxidized factor could be either positive or negative depending on the speciation of seed aerosols present.