Pool of Dust Particles over the Asian Continent: Balloon-borne Optical Particle Counter and Ground-based Lidar Measurements at Dunhuang, China

Measurements of aerosols were made in 2001 and 2002 at Dunhuang (40 degrees 00'N, 94 degrees 30'E), China to understand the nature of atmospheric particles over the desert areas in the Asian continent. Balloon-borne measurements with an optical particle counter suggested that particle size and concentration had noticeable peaks in super micron size range not only in the boundary mixing layer but also in the free troposphere. Super-micron particle concentration largely decreased in the mid tropopause (from 5 to 10 km; above sea level, a.s.l.). Lidar measurements made during August 2002 at Dunhuang suggested the possibility that mixing of dust particles occurred from near the ground to about 6 km even under calm weather conditions, and a large depolarization ratio of particulate matter was found in the aerosol layer. The top of the aerosol layer was found at heights of nearly 6 km (a.s.l.). It is strongly suggested that nonspherical dust particles (Kosa particles) frequently diffused in the free atmosphere over the Taklamakan desert through small-scale turbulences and are possible sources of dust particles of weak Kosa events that have been identified in the free troposphere not only in spring but also in summer over Japanese archipelago. Electron microscopic experiments of the particles collected in the free troposphere confirmed that coarse and nonspherical particles observed by the mineral particle were major components of coarse mode (diameter larger than 1 microm) below about 5 km over Dunhuang, China.     

Sediment quality in the Douro river estuary based on trace metal contents, macrobenthic community and elutriate sediment toxicity test (ESTT)

The aim of this study was to evaluate the sediment quality in the mesotidal Douro River estuarine environment, in order to identify areas where sediment contamination could cause ecosystem degradation. Samples were obtained in five locations and sediment characterised for grain size, total organic matter, total-recoverable metals (Al, Fe, Cu, Pb, Cr, Ni, Cd, Zn and Mn), as well as acid volatile sulfide (AVS) and simultaneously extracted metals (SEM). In situ effects were evaluated by examining the macrobenthic community structure. An elutriate sediment toxicity test (ESTT) was used to estimate the amount of metals and nutrients that could be exchanged with the water column through resuspension, and its positive or negative effects on the growth of the micro-alga Emiliania huxleyi in a 10 day test. Anthropogenic metal contamination was identified at the north bank of the Douro estuary, with deleterious effects on the macrobenthic community, namely decrease in number of species and diversity. This contamination could possibly also be toxic for water column organisms, in case of resuspension, as shown by the ESTT. Sediments from the salt marsh at the south bank showed an impoverished macrobenthic community and elutriate toxicity, which appeared to be due to anaerobic conditions. This study clearly shows the usefulness of the ESST approach to assess the biological effect of resuspension of estuarine sediments.     

Assessment of Metal Contamination in Doñana National Park (Spain) using Crayfish (Procamburus Clarkii)

Water quality assessment in the Aznalcollar area was attempted using multivariate methods based on heavy metal concentrations in red swamp crayfish (Procamburus clarkii). Trace levels of four heavy metals, copper (Cu), zinc (Zn), cadmium (Cd) and lead (Pb), were detected in crayfish from eleven different stations. Principal component analysis (PCA) highlighted a gradient of contamination between the sampling stations. Cluster analysis (CA) distinguished three groups of stations. Discriminant analysis also differentiated three groups. The group centroids of the first discriminant function were used to devise an index that varies according to the source of the crayfish. These standardized values are proposed for use as a water quality index. The ability of this index to successfully predict environmental quality was proved with random samples.     

Monochlorobenzene Marine Risk Assessment with Special Reference to the Osparcom Region: North Sea

This risk assessment on monochlorobenzene was carried out for the marine environment, following methodology given in the EU risk assessment Regulation (1488/94) and Guidance Document of the EU New and Existing Substances Regulation (TGD, 1996). Data from analytical monitoring programmes in large rivers and estuaries in the North Sea area were collected and evaluated for effects and environmental concentrations. Risk is indicated by the ratio of predicted environmental concentration (PEC) to predicted no-effect concentration (PNEC) for the marine aquatic environment. In total, 27 data for fish, 24 data for invertebrates and 13 data for algae were evaluated. Acute and chronic toxicity studies were taken into account and appropriate assessment factors used to define a final PNEC value of 32 micro/l. Recent monitoring data indicate that monochlorobenzene levels in surface waters are below determination limits of 0.1, 0.2, 0.5 microg/l used in monitoring programs. Assuming that half of the lowest determination (0.1 microg/l) is typical, a PEC of 0.05 microg/l was derived. A worst case of 0.5 microg/l is assumed. PEC/PNEC ratios give safety factors of 60 to over 500, taking no account of dilution in the sea. Monochlorobenzene is not a 'toxic, persistent and liable to bioaccumulate' substance sensu the Oslo and Paris Conventions for the Prevention of Marine Pollution (OSPAR-DYNAMEC) criteria. Environmental fate and effects data indicate that current use of monochlorobenzene poses no unacceptable risk to the aquatic environment.     

A Metamodeling Approach for Integrated Assessment of Air Quality Policies

A method is proposed to build integrated models (also called Metamodels) aimed at quantifying the economic efficiency of air quality policies. This Metamodeling approach is based on the coupling of two complementary models, that operate at different scales in space and time, and which represent the economic and the physical and chemical processes, respectively. The joint consideration of the physico-chemical and techno-economic structure of the pollution control problems permits a comprehensive evaluation of air pollution abatement strategies. The motivating pollution control problems include urban-regional air quality management through efficient energy and traffic control policies. A pilot study, exploiting data collected in the Geneva canton (Switzerland), is used to demonstrate the potential of the approach.     

Spatial properties of nutrient concentrations in the Baltic Sea

Using existing monitoring data, the present study attempts to characterize spatial patterns of surface water nutrients in the Baltic Sea. The analysis was made for two different spatial scales, differences between and within sub-basins.Non-parametric methods were chosen to reduce problems with the distributional properties of the data. By dividing the data into four seasons care was taken as to seasonality. To avoid bias due to different laboratory analysis, only data from Nordic countries were used, whose results did not apparently depart from each other. Bias due to different sampling frequency was another problem. This was reduced by using only the last observation in each season for every station and year.The results suggested differences in the nutrient concentrations between basins. The two northernmost basins (Bothnian Bay and Bothnian Sea) had lower phosphate concentrations and higher silicate concentrations compared to the rest of the Sea. Bothnian Bay and the Gulf of Finland had higher nitrate concentrations.The concentration structure within basins was studied using transects in both latitudinal and longitudinal direction. A gradient for phosphate and nitrate was found in the Gulf of Finland, with lower concentrations at the mouth. The Bothnian Sea showed lower concentrations in the middle of the basin compared to the coasts. The highest concentrations of phosphate were found close to the Finnish coast and for silicate the highest concentrations were located near the Swedish coast. It was not possible to study variation in the west-east direction within the Baltic proper, due to data shortage. For the transects in the north-south direction no differences were detected for nitrate and silicate. Phosphate gave one significant result during autumn for the transect in the eastern part of the Baltic proper.This study revealed several problems associated with the data available. Uneven sampling in space and time put severe constraints on the study. A better design of the monitoring program is suggested, where spatial properties are considered explicitly. Revision of the program in this direction is needed for reasonable calculation of total amounts and concentrations representative for a basin.     

Fractionation of butyltin species during sample extraction and preparation for analysis

Solvent extraction and evaporative concentration steps are often used in procedures for the measurement of butyltins in environmental samples. As part of a larger study utilizing radiolabeled butyltins, the loss and fractionation of butyltins during sample preparation was investigated. TBT, DBT, and MBT were extracted from acidified seawater by hexane with efficiencies of about 95–99, 50–60 and 11% respectively. In addition, losses of about 70% of DBT were found during evaporative concentration of hexane. A variety of sediment extraction procedures were tested and none were found to be highly efficient for total butyltin extraction.     

Estimating means and variances: The comparative efficiency of composite and grab samples

This paper compares the efficiencies of two sampling techniques for estimating a population mean and variance. One procedure, called grab sampling, consists of collecting and analyzing one sample per period. The second procedure, called composite sampling, collectsn samples per period which are then pooled and analyzed as a single sample. We review the well known fact that composite sampling provides a superior estimate of the mean. However, it is somewhat surprising that composite sampling does not always generate a more efficient estimate of the variance. For populations with platykurtic distributions, grab sampling gives a more efficient estimate of the variance, whereas composite sampling is better for leptokurtic distributions. These conditions on kurtosis can be related to peakedness and skewness. For example, a necessary condition for composite sampling to provide a more efficient estimate of the variance is that the population density function evaluated at the mean (i.e.f()) be greater than . If , then a grab sample is more efficient. In spite of this result, however, composite sampling does provide a smaller estimate of standard error than does grab sampling in the context of estimating population means.     

Biodegradability: An assessment of commercial polymers according to the Canadian method for anaerobic conditions

The degradation of several biodegradable polymers was measured as a result of exposure to an anaerobic medium. The polymers investigated included materials based upon polylactic acid, polylactone, and poly(hydroxy butyrate/valerate) as well as those incorporating starch-based materials. The degradation was monitored by methane and carbon dioxide evolution. In addition, the physical and chemical changes were noted as a result of exposure. These measurements included changes in mass, dimension, and molecular weight. FTIR, UV-vis, proton, and¹³C NMR spectra were also recorded prior to and after exposure. The results clearly indicated that several biological and chemical degradation processes were occurring with the biodegradable polymers studied.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Issued as NRCC No. 37549.     

Structural and functional responses of a freshwater plankton community to acute copper stress

An in-situ experiment was performed to quantify the impacts of copper sulfate on plankton structure and carbon dynamics. Plankton were exposed to 140 microg litre(-1) copper in quadruplicate mesocosms. Community structure was monitored for 14 days by microscopical counts and compared with untreated controls. Carbon dynamics were assessed by tracer studies using (14)C bicarbonate and (14)C glucose, to follow the fate of carbon in the algal- and bacterial-based pathways, respectively. Copper reduced the dry-weight biomass of zooplankton, ciliates, flagellates, and autotrophic phytoplankton. Bacterial biomass was increased by an order of magnitude relative to the controls. The bacterial response was most likely due to reduced grazing pressure and/or nutrient release from dying plankton. Copper reduced the effectiveness of the food web in transporting carbon to the surviving zooplankton. Bacterial-based pathways were more greatly affected than algal-based pathways, because zooplankton in the copper treatment were macro-grazers (cyclopoids), which cannot utilize bacteria.