14、用毛细管气相色谱的滞留指数比鉴定PCB的组份

许多研究证明,多氯联苯(PCB)是常见的环境化合物。 PCB分析的主要问题就是可能有大量的单一成份。在商品PCB混合物中,一共发现了209种含氯同系物异构体中的100多种。由环境样品尤其是由生物体中得到的PCB残留物表明是一种与含氯40—60％的商     

The role of moisture in the nest thermoregulation of social wasps

Paper nests of social wasps are intriguing constructions for both, biologists and engineers. We demonstrate that moisture and latent heat significantly influence the thermal performance of the nest construction. Two colonies of the hornet Vespa crabro were investigated in order to clarify the relation of the temperature and the moisture regime inside the nest. Next to fairly stable nest temperatures the hornets maintain a high relative humidity inside the nest. We found that in consequence a partial vapor-pressure gradient between nest and ambient drives a constant vapor flux through the envelope. The vapor flux is limited by the diffusion resistance of the envelope. The driving force of vapor flux is heat, which is consumed through evaporation inside the nest. The colony has to compensate this loss with metabolic heat production in order to maintain a stable nest temperature. However, humidity fluctuations inside the nest induce circadian adsorption and desorption cycles, which stabilize the nest temperature and thus contribute significantly to temperature homeostasis. Our study demonstrates that both mechanisms influence nest thermoregulation and need to be considered to understand the thermodynamic behavior of nests of wasps and social insects in general.     

Emission and fate assessment of methyl tertiary butyl ether in the Boston area airshed using a simple multimedia box model: comparison with urban air measurements

Expected urban air concentrations of the gasoline additive methyl tertiary butyl ether (MTBE) were calculated using volatile emissions estimates and screening transport models, and these predictions were compared with Boston, MA, area urban air measurements. The total volatile flux of MTBE into the Boston primary metropolitan statistical area (PMSA) airshed was calculated based on estimated automobile nontailpipe emissions and the Universal Quasi-Chemical Functional-Group Activity Coefficient computed abundance of MTBE in gasoline vapor. The fate of MTBE in the Boston PMSA was assessed using both the European Union System for the Evaluation of Substances, which is a steady-state multimedia box model, and a simple airshed box model. Both models were parameterized based on the meteorological conditions observed during air sampling in the Boston area. Measured average urban air concentrations of 0.1 and 1 microg/m3 MTBE during February and September of 2000, respectively, were comparable to corresponding model predictions of 0.3 and 1 microg/m3 and could be essentially explained from estimated temperature-dependent volatile emissions rates, observed average wind speed (the airshed flushing rate), and reaction with ambient tropospheric hydroxyl radical (*OH), within model uncertainty. These findings support the proposition that one can estimate gasoline component source fluxes and use simple multimedia models to screen the potential impact of future proposed gasoline additives on urban airsheds.     

Microbial biomass and enzyme activities in submerged rice soil amended with municipal solid waste compost and decomposed cow manure

We studied the suitability of municipal solid waste compost (MSWC) application to submerged rice paddies in the perspective of metal pollution hazards associated with such materials. Experiments were conducted during the wet seasons of 1997, 1998 and 1999 on rice grown under submerged condition, at the Agriculture Experimental Farm, Calcutta University at Baruipur, West Bengal, India. The treatments consisted of control, no input; MSWC, at 60 kgNha(-1); well decomposed cow manure (DCM), at 60 kgNha(-1); MSWC (30 kgNha(-1)) +Urea (30 kgNha(-1)); DCM (30 kgNha(-1)) +U (30 kgNha(-1)) and Fertilizer, (at 60:30:30 NPK kgha(-1) through urea, single superphosphate and muriate of potash respectively). Soil microbial biomass-C (MBC), MBC as percentage of organic-C (ratio index value, RIV), urease and acid phosphatase activities were higher in DCM than MSWC-treated soils, due to higher amount of biogenic organic materials like water soluble organic carbon, carbohydrate and mineralizable nitrogen in the former. The studied parameters were higher when urea was integrated with DCM or MSWC, compared to their single applications. Soil MBC, urease and acid phosphatase activities periodically declined up to 60 day after transplanting (DAT) and then increased after crop harvest. The heavy metals in MSWC did not detrimentally influence MBC, urease and acid phosphatase activities of soil. In the event of long term MSWC application, changes in soil quality parameters should be monitored regularly, since heavy metals once entering into soil persist over a long period.     

Assessment of air pollution in Nagasaki City: determination of polycyclic aromatic hydrocarbons and their nitrated derivatives, and some metals

Air pollutants such as polycyclic aromatic hydrocarbons (PAHs), their nitrated derivatives (NPAHs), and some metals on airborne particles in Nagasaki city, Japan were determined over a period of 12 months by high-performance liquid chromatography with chemiluminescence, fluorescence and flameless atomic absorption spectrometry. The average concentrations (range) were 18.24 (4.07-41.54) ng/m3 for total PAHs, 0.91 (0.23-4.10) pg/m3 for NPAHs, 7.95 (1.71-16.31) ng/m3 for Pb, 11.56 (3.35-24.96) ng/m3 for Mn and 3.79 (0.97-14.71) ng/m3 for Ni (n = 136). The toxic equivalency factors adjusted concentration of total PAHs determined in Nagasaki city area was 2.33 ng/m3. Concentrations of total PAHs and NPAHs in winter were higher than those in summer. In a weekly variations study, total PAHs and NPAHs concentrations, as well as traffic volume showed a similar tendency with all values higher during weekdays and lower at the weekend. The correlation coefficients between total PAHs or NPAHs and traffic volume were 0.781 and 0.818, respectively. These results suggested that one of the main sources for NPAHs and PAHs in a city area might be motor vehicles.     

Method development for determination of fluroxypyr in water

Improved methods for extraction and clean up of fluroxypyr residue in water have been established. Two methods of fluroxypyr extraction were used, namely, Direct Measurement of fluroxypyr and Concentration of fluroxypyr onto A Solid Phase Extraction (SPE) Adsorbent, followed by elution with solvent before determination of fluroxypyr. The recovery for Direct Measurement of fluroxypyr in water containing 8-100 microg L(-1), ranged from 86 to 110% with relative standard deviation of 0.7 to 2.15%. For the second method, three types of SPE were used, viz. C18, C18 end-capped and polyvinyl dibenzene (ISOLUTE ENV+). The procedure involved concentrating the analyte from fluroxypyr-spiked water at pH 3, followed by elution of the analyte with 4 mL of acentonitrile. The recovery of fluroxypyr from the spiked sample at 1 to 50 microg L(-1) after eluting through either C18 or C18 end-capped ranged from 40-64% (with relative standard deviation of 0.7 to 2.15) and 41-65% (with standard deviation of 1.52 to 11.9). The use of ISOLUTE ENV+, gave better results than the C18, C18 end-capped or the Direct Measurement Methods. The recovery and standard deviation of fluroxypyr from spiked water using ISOLUTE ENV+ ranged from 91-102% and 2.5 to 5.3, respectively.     

Assessing the microbial activity of soil samples,its nutrient limitation and toxic effects of contaminants using a simple respiration test

Eight soil samples from five wells of a former gas plant site differing in the contamination with BTEX and PAHs as well as the nutrient content were investigated by soil respiration measurements. The basal, glucose as well as NH4+ and PO4(3-) induced cumulative oxygen consumption and carbon dioxide production in 72 and 120 h were determined and additionally the maximal turnover rates and the limitation quotients were calculated. Without additional carbon source only one of five investigated samples was clearly nutrient limited. After glucose supplementation four of seven investigated samples showed nutrient limitation that was in accordance with the available ammonium and phosphorous content. BTEX and PAHs did not exhibit an inhibiting effect on the respiration rate. In contrast, BTEX containing samples exhibited the highest oxygen consumption indicating biodegradation of the contaminants. The results show that oxygen consumption and carbon dioxide production as well as the kinetic of these processes are all informative parameters characterizing the whole microbial respiration potential and their nutrient limitation in soil samples. Therefore this fast respirometric method can be used for the decision if further detailed studies of the bioremediation are useful and if nutrient supplementation is recommended to enhance natural attenuation.     

Evaluation of potential dermal exposure of pesticide spray operators in greenhouses by use of visible tracers

In the present study, the potential dermal and inhalation exposure of the operator was measured, following simulation of insecticide application with the dye tracer Sunset Yellow in greenhouse cucumbers and tomatoes. For the monitoring of operator exposure, the whole body technique was used. The potential inhalation exposure was measured with a personal air sampler equipped with a glass fiber filter. The potential dermal operator exposure ranged from 84.4 to 526.7 ml of spray solution (s.s.)/h for the whole body and from 18.5 to 62.5 ml s.s./h for hands in the case of greenhouse cucumbers. The respective inhalation exposure was between 0.17 and 1.0 ml s.s./h. For greenhouse tomatoes, the potential body exposure was in the range of 22.4 to 62.1 ml s.s./h. The hand exposure varied from 5.5 to 6.1 ml s.s./h. The potential inhalation exposure was in the range of 0.33 to 0.43 ml s.s./h. The potential dermal operator exposure is a highly variable parameter, with a variation factor higher than 100% in many cases. One of the most critical factors for the determination of both potential dermal and inhalation exposure is the application pressure. Other field and operational conditions, including unpredictable factors, are also important for the determination of operator exposure levels. The measured potential dermal operator exposure values were above the levels of exposure estimated with mathematical models.     

Formation of PCDDs and PCDFs during the combustion of polyvinylidene chloride

In laboratory-scale combustion of polyvinylidene chloride (PVDC) with a quartz tubular furnace designed and fabricated to provide the desired combustion temperature and mixing state of combustion gas with air, it was found that at 800 degrees C or higher the level of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans [corrected] (PCDDs/PCDFs) resulting from PVDC combustion was no higher than that from heating air alone, and thus far below the levels which resulted from PVDC combustion at 750 degrees C or lower. The results provide the first laboratory confirmation of the relation between PVDC incineration temperature and PCDD/PCDF formation, and of the primary importance of high temperature, turbulence for mixing between air and combustion gas, and sufficient residence time, as governing factors for the minimization of PCDD/PCDF formation in municipal solid waste incinerators.     

Two-dimensional laboratory simulation of LNAPL infiltration and redistribution in the vadose zone

A quantitative two-dimensional laboratory experiment was conducted to investigate the immiscible flow of a light non-aqueous phase liquid (LNAPL) in the vadose zone. An image analysis technique was used to determine the two-dimensional saturation distribution of LNAPL, water and air during LNAPL infiltration and redistribution. Vertical water saturation variations were also continuously monitored with miniature resistivity probes. LNAPL and water pressures were measured using hydrophobic and hydrophilic tensiometers. This study is limited to homogeneous geological conditions, but the unique experimental methods developed will be used to examine more complex systems. The pressure measurements and the quantification of the saturation distribution of all the fluids in the entire flow domain under transient conditions provide quantitative data essential for testing the predictive capability of numerical models. The data are used to examine the adequacy of the constitutive pressure-saturation relations that are used in multiphase flow models. The results indicate that refinement of these commonly used hydraulic relations is needed for accurate model prediction. It is noted in particular that, in three-fluid phase systems, models should account for the existence of a residual NAPL saturation occurring after NAPL drainage. This is of notable importance because residual NAPL can act as a non negligible persistent source of contamination.