An analysis of UK waste minimization clubs: key requirements for future cost effective developments

The UK waste strategy is based upon use of the best practicable environmental option (BPEO), by those making waste management decisions. BPEO is supported by the use of the waste hierarchy, with its range of preferable options for dealing with waste, and the proximity principle, where waste is treated/disposed of as close to its point of origin as possible. The national waste strategy emphasizes the key role of waste minimization and encourages industry, commerce and the public to move towards sustainable waste management practice for economic and environmental reasons. Waste minimization clubs have been used, since the early 1990s, to demonstrate to industry/commerce that reducing waste production can lead to significant financial savings. There have been around 75 such clubs in the UK and they receive support from a wide range of agencies, including the Environmental Technology Best Practice Program. The early Demonstration Clubs had significant savings to cost ratios, e.g. Aire and Calder at 8.4, but had very high costs, e.g. Aire and Calder at 400,000 pounds. It is acknowledged that the number of clubs will have to be approximately doubled in the next few years so as to have an adequate coverage of the UK. There are at present, marked regional variations in club development and cognizance needs to be taken, by facilitators, of the need for extensive coverage of the UK. Future clubs will probably have to operate in a financially constrained climate and they need to be designed to deliver significant savings and waste reduction at low cost. To aid future club design, final reports of all projects should report in a standard manner so that cost benefit analysis can be used to inform facilitators about the most effective club type. rights reserved.     

Treatment of anti-osmotic drug based pharmaceutical effluent in an upflow anaerobic fluidized bed system

During the production of Cephradine (a main constituent of anti-osmotic drug) a large quantity of concentrated effluent was produced. The main polluting compounds in this effluent are osmotic drug, acetic acid and ammonia. The feasibility of using a fluidized bed reactor under anaerobic condition with bioaugmentation to treat anti-osmotic drug based pharmaceutical effluent was evaluated. The main objective of the study was to show that bioaugmentation could be used to promote biological treatment to applications where conventional operation might be difficult or unfavourable. The effluent with chemical oxygen demand (COD) of 14000-18000 mg/l was treated in a fluidized bed reactor with a hydraulic retention time of 3-12 h. The reactor was unable to maintain consistent removal in conventional mode of operation due to an inability to retain and grow biomass. The COD reduction (%) after inoculation from a sequencing batch reactor was related to influent concentration, mass of inoculum and hydraulic retention time characterized by calculating the initial food to microorganism ratio. The role of volatile fatty acid (VFA) as cosubstrate was assessed with respect to COD reduction (%). Continuous COD reduction (%) attained a maximum value of 88.5% using bioaugmentation through periodic addition of acclimated cells every 2 days with 30-73.2 g of cells from an off-line enricher reactor.     

Time activity modelling of domestic exposures to radon

Radon gas occurs naturally in the environment with a variable distribution. In some areas radon concentrates sufficiently within the built environment that it is considered as a public health risk. It is possible, successfully, to reduce radon levels in the built environment, and it has been shown that such remediation programmes can be justified in terms of the costs and benefits accruing. However, the estimated dose received by people in their homes depends on the time spent indoors. The research presented here uses data derived from time activity surveys in Northamptonshire, together with radon data from a representative home, to model potential exposures for different population sub-groups. Average home occupancy ranged from 14.8h (probable error 2.5h) for students to 17.7 (3.1) h for adults; schoolchildren spent an average of 14.9 (1.2) h at home. Over a quarter of adults, however, were in the home for 22 h on more. These differences in occupancy patterns lead to substantial differences in radon exposure. In a home with an average hourly ground floor radon concentration of 467 Bqm(-3), modelled hourly average exposures ranged from ca. 250 Bqm(-3) for students and school children, to over 340 Bqm(-3), for women based at home. Modelled exposures show a non-linear association with total time spent at home, suggesting that exposure estimates based on linear models may provide misleading estimates of health risks from radon and the potential benefits of radon remediation. Highest hourly exposures are likely to be experienced by people with highly occupancy, living in single-storey, ground floor accommodation (for example, the elderly the infirm and non-working young mothers). Since these may be least aware of radon risks, and least able to take up remediation measures, they should be specifically targeted for radon monitoring and for assistance in remediation schemes.     

Concentrations and accumulation profiles of PCDDs, PCDFs and dioxin-like PCBs in adipose fat tissues of Korean women

Reports on residue levels and accumulation profiles of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in human adipose tissue are scarce in Korea. In this study, concentrations and accumulation features of PCDD/Fs and DL-PCBs were determined in the samples of adipose tissue collected from Korean women in 2007-2008. The total dioxin-like toxic equivalent (TEQ) concentrations (3.4-42 pg g(-1) lipid wt) in Korean adipose tissues were similar to those reported in European and other Asian countries. The relative contributions of individual compounds to total TEQs were as follows: non-ortho PCBs (mean: 45%) > PCDFs (28%) > PCDDs (24%) > mono-ortho PCBs (3%), a pattern similar to those reported for seafoods in Korea. The dominant PCDD/F congeners found in adipose tissues were OCDD and 2,3,4,7,8-PeCDF and dominant PCBs were 118, 156 and 105. No correlation was found between subject's age and concentrations of dioxin-like contaminants. Body mass index was not correlated with concentrations of PCDD/Fs and was negatively (p < 0.001) correlated with concentrations of DL-PCBs. The results of this study provide baseline information on PCDD/Fs and DL-PCBs in adipose tissues of the general population in Korea.     

Reactions of 2,4,6-trichlorophenol on model fly ash: oxidation to CO and CO2, condensation to PCDD/F and conversion into related compounds

Thermal treatment of 2,4,6-trichlorophenol on a magnesium silicate-based model fly ash in the temperature range between 250 degrees C and 400 degrees C leads predominantly to carbon monoxide and carbon dioxide. The fraction of 2,4,6-trichlorophenol which is oxidized to CO and CO2 increases from 3% at 250 degrees C to 75% at 400 degrees C. Further products are polychlorinated benzenes, dibenzo-p-dioxins, dibenzofurans and phenols. The homologue and isomer patterns of the chlorobenzenes suggest chlorination in the ipso-position of the trichlorophenol. The formation of PCDD from 2,4,6-trichlorophenol and 2,3,4,6-tetrachlorophenol on municipal solid waste incinerator fly ashes and model fly ash were compared and the reaction order calculated.     

Mutual effects of cadmium and phosphate on their adsorption and desorption by goethite

Adsorption of cadmium (Cd) and phosphate by oxides or soils has been extensively studied, but the adsorption/desorption kinetics and mutual effects of these two species in co-existing systems has received little attention. In this study, a batch equilibration method was used to investigate the effect of phosphate and its application time on Cd adsorption and desorption on goethite. The influence of Cd and its application time on phosphate sorption and desorption kinetics was also determined. For Cd adsorption, phosphate was introduced into the system by two sequences: pre-treating goethite at 40 (degrees)C for 1 week, and applying with Cd simultaneously. Similarly, for phosphate sorption, Cd was applied by pre-treating goethite at 40 (degrees)C for 1 week or simultaneous addition with phosphate. Results demonstrated that phosphate added to goethite enhanced Cd adsorption, and facilitated Cd release as compared to untreated goethite. Cadmium had slightly higher adsorption, but a significantly faster desorption rate from the goethite simultaneously treated with phosphate and Cd, as compared to phosphate-pretreated goethite. Cadmium and its application time had little impact on phosphate sorption by goethite. However, phosphate desorption kinetics was affected by Cd application time. When the sorption time was short (15 min), phosphate desorption was faster from the goethite that was simultaneously treated with phosphate and Cd, as compared to Cd pretreated or untreated goethite. In contrast, a longer sorption time (4 weeks) resulted in a higher desorption rate of phosphate from Cd pretreated goethite than simultaneously phosphate-Cd treated goethite. This study provided useful information on adsorption/desorption kinetics in complicated Cd-phosphate-goethite systems.     

Ecological and physiological controls of species composition in green macroalgal blooms

Green macroalgal blooms have substantially altered marine community structure and function, specifically by smothering seagrasses and other primary producers that are critical to commercial fisheries and by creating anoxic conditions in enclosed embayments. Bottom-up factors are viewed as the primary drivers of these blooms, but increasing attention has been paid to biotic controls of species composition. In Washington State, USA, blooms are often dominated by Ulva spp. intertidally and Ulvaria obscura subtidally. Factors that could cause this spatial difference were examined, including competition, grazer preferences, salinity, photoacclimation, nutrient requirements, and responses to nutrient enrichment. Ulva specimens grew faster than Ulvaria in intertidal chambers but not significantly faster in subtidal chambers. Ulva was better able to acclimate to a high-light environment and was more tolerant of low salinity than Ulvaria. Ulvaria had higher tissue N content, chlorophyll, chlorophyll b: chlorophyll a, and protein content than Ulva. These differences suggest that nitrogen availability could affect species composition. A suite of five grazers preferred Ulva to Ulvaria in choice experiments. Thus, bottom-up factors allow Ulva to dominate the intertidal zone while resistance to grazers appears to allow Ulvaria to dominate the subtidal zone. While ulvoid algae are in the same functional-form group, they are not functionally redundant.     

Is spread of invasive species regulated? Using ecological theory to interpret statistical analysis

We investigate a recent proposal that invasive species display patterns of spatial "spread regulation" analogous to density-dependent regulation of population abundances. While invasive species do offer valuable tests of ecological theories about spatial spread, we argue that the statistical approach used in the study is not useful, and that the proposed definition of "spread regulation" is likely to be confusing. While concepts of negative feedbacks in spatial spread may be reasonable, the proposed definition of "spread regulation" encompasses accelerating, constant, or decelerating spread. There is no compelling biological or practical reason to adopt such a definition. Moreover, we show that the statistical patterns (from time series of ratios of newly to recently invaded sites) proposed as evidence of spread regulation are predictable from basic diffusion models or other common models of constant spread with some stochasticity in dynamics and/or observations. Because such a wide range of processes would generate the observed patterns, no clear biological conclusions emerge from the proposed approach to spread analysis. When regarded in the context of the impacts and management of invasive species, the proposed regulation concept has the potential to create costly misunderstandings.     

Comparing the greenhouse gas emissions from three alternative waste combustion concepts

Three alternative condensing mode power and combined heat and power (CHP) waste-to-energy concepts were compared in terms of their impacts on the greenhouse gas (GHG) emissions from a heat and power generation system. The concepts included (i) grate, (ii) bubbling fluidised bed (BFB) and (iii) circulating fluidised bed (CFB) combustion of waste. The BFB and CFB take advantage of advanced combustion technology which enabled them to reach electric efficiency up to 35% and 41% in condensing mode, respectively, whereas 28% (based on the lower heating value) was applied for the grate fired unit. A simple energy system model was applied in calculating the GHG emissions in different scenarios where coal or natural gas was substituted in power generation and mix of fuel oil and natural gas in heat generation by waste combustion. Landfilling and waste transportation were not considered in the model. GHG emissions were reduced significantly in all of the considered scenarios where the waste combustion concepts substituted coal based power generation. With the exception of condensing mode grate incinerator the different waste combustion scenarios resulted approximately in 1 Mton of fossil CO₂-eq. emission reduction per 1 Mton of municipal solid waste (MSW) incinerated. When natural gas based power generation was substituted by electricity from the waste combustion significant GHG emission reductions were not achieved.     

Fossil and biogenic CO₂ from waste incineration based on a yearlong radiocarbon study

We describe the first long-term implementation of the radiocarbon (¹⁴C) method to study the share of biogenic (%Bio C) and fossil (%Fos C) carbon in combustion CO₂. At five Swiss incinerators, a total of 24 three-week measurement campaigns were performed over 1 year. Temporally averaged bag samples were analyzed for ¹⁴CO₂ by accelerator mass spectrometry. Significant differences between the plants in the share of fossil CO₂ were observed, with annual mean values from 43.4 ± 3.9% to 54.5 ± 3.1%. Variations can be explained by the waste composition of the respective plant. Based on our dataset, an average value of 48 ± 4%Fos C was determined for waste incineration in Switzerland. No clear annual trend in %Fos C was observed for four of the monitored incinerators, while one incinerator showed considerable variations, which are likely due to the separation and temporary storage of bulky goods.