Relationship Between Crown Condition and Tree Diameter Growth in Southern Swedish Oaks

We studied correlation between crown conditions and tree-ring widths in 260 trees of pedunculate oak (Quercus robur L.) growing on 33 sites in southern Sweden. The tree-ring increment over 1998-2002 was highest in trees with healthy crowns, intermediate in trees with moderately declined crowns, and lowest in trees with heavily declining crowns. The time period with significant correlation between crown status and tree-ring increment varied between 10 years (given autocorrelation in tree-ring chronologies preserved) and 4 years (autocorrelation removed). In pairwise comparisons of three crown classes, differences in tree-ring increment between trees with healthy crowns and trees with heavily declining crowns were the most pronounced, Fisher LSD P value staying below 0.05 over 13 years (autocorrelation preserved ) or 4 years (autocorrelation removed). Over two 5-year periods (1993-1997 vs. 1998-2002) the cumulative increment increased significantly for trees with healthy crowns, did not change in trees with moderately declining crowns, and significantly decreased in trees with heavily declining crowns. For trees with healthy crowns, this dynamics may represent growth recovery after 1992 drought. Instead, oaks with defoliation above 60% appear to reach a threshold in their ability to recover growth. At sites on nutrient-poor soils cumulative increments over 1998-2002 differed significantly among trees with different crown condition and no differences were observed at sites on nutrient-rich soils. Analyses and interpretation of the oak growth trends as recovered from tree-ring chronologies may be improved by controlling for the crown status of the trees sampled, e.g., by using sampling strategy that would represent the average crown and growth conditions of the sites.     

Application of a Larval Medaka Assay to Evaluate the Fish Safety Level in Sagami River, Japan

Physico-chemical characteristics of some river and hand-dug well waters used for drinking and domestic purposes in the oil rich Niger Delta area of Nigeria were assessed using standard methods. The concentrations of the parameters in the river water samples ranged in the following order: pH (5.6–6.9), temperature (26.90–28.60°C), turbidity (23–63 NTU), electrical conductivity (52–184 μs/cm), DO (5.4–7.2 mg/l), BOD (21–57 mg/l), TDS (6.0–217 mg/l), PO₄ ³⁻ (0.19–1.72 mg/l), SO₄ ²⁻ (25–36.8 mg/l), NO₃ ⁻ (20.3–28 mg/l), Fe (6.07–15.71 mg/l), Zn (0.04–0.24 mg/l), Pb (0.01–0.17 mg/l), Ni (0.01–0.13 mg/l), Vn (0.01–0.20 mg/l) and Hg (0.001–0.002 mg/l). The concentrations of these parameters in the hand-dug well water ranged in the following order: pH (5.7–6.8) temperature (26–30°C), turbidity (134–171 NTU), electrical conductivity (160–340 μs/cm), DO (5.4–6.4 mg/l), BOD (13–34 mg/l), TDS (110–190 mg/l), PO₄ ³⁻ (0.84–1.84 mg/l), SO₄ ²⁻ (10.6–28.1 mg/l), NO₃ ⁻ (11.3–23 mg/l), Fe (13.17–16.31 mg/l), Ni (0.01–0.02 mg/l), Vn (0.01–0.04 mg/l) and Hg (0.001–0.004 mg/l). The concentrations of BOD, turbidity, NO₃ ⁻ and Fe in the water samples were above WHO and FMENV permissible limits for safe drinking water. The results suggest that the use of such waters for drinking and domestic purposes pose a serious threat to the health of the users and calls for the intervention of government agencies.     

Characteristics of real-world vehicular emissions in Chinese cities

On-board emission measurements were performed on 49 light-duty gasoline vehicles in seven cities of China. Vehicle-specific power mode distribution and emission characteristics were analyzed based on the data collected. The results of our study show that there were significant differences in different types of roads. The emission factors and fuel consumption rates on arterial roads and residential roads were approximately 1.4-2 times those on freeways. The carbon monoxide, hydrocarbon, and nitrogen oxides emission factors of Euro II vehicles were on average 86.2, 88.2, and 64.5% lower than those of carburetor vehicles, respectively. The new vehicle emission standards implemented in China had played an important role in reducing individual vehicle emissions. More comprehensive measures need to be considered to reduce the total amount of emissions from vehicles.     

Fugitive emissions opacity determination using the digital opacity compliance system (DOCS)

Maintenance of Department of Defense (DoD) weapon systems, conducting battlefield training exercises as well as meeting military construction and/or demolition schedules, invariably generate fugitive air emissions, many of which are visible. Although there is no codified federal method for quantifying fugitive emissions opacity, many state and local air regulatory agencies have instituted enforceable fugitive emission opacity standards at DoD facilities. The current study focused on comparing the performance of the digital opacity compliance system (DOCS) with U.S. Environment Protection Agency Method 9 (Method 9) certified human observers in quantifying the visible opacity associated with fugitive emissions produced using a commercial fog generator. By systematically repositioning both DOCS cameras and Method 9-certified observers during field testing, differences in method performance as a function of observational locations were documented. At both the 30- and 300-ft off-set distances, opacity levels reported by the DOCS technology and Method 9-certified smoke readers were found to be statistically different at the 99% confidence level. Alternatively, at the 90- and 150-ft off-set distances, results suggested that there was an insignificant difference at the 99% confidence level between the two methods. Comparing the magnitude of the each method's standard deviation suggested that, at the 30-ft off-set distance, the DOCS technology was consistently more precise than Method 9-certified readers regardless of the observer's downwind distance. However, at the 90, 150, and 300-ft off-set distances, method precision seemed to vary as a function of both off-set and downwind distance. The primary factor affecting the consistency in opacity measurements appeared to be the impact of ground-level air turbulence on fog plume dispersion and transport. Field observations demonstrated that localized wind shear played a critical and decisive role in how and to what extent fugitive emissions opacity could be determined, regardless of the method selected.     

Refinery evaluation of optical imaging to locate fugitive emissions

Fugitive emissions account for approximately 50% of total hydrocarbon emissions from process plants. Federal and state regulations aiming at controlling these emissions require refineries and petrochemical plants in the United States to implement a Leak Detection and Repair Program (LDAR). The current regulatory work practice, U.S. Environment Protection Agency Method 21, requires designated components to be monitored individually at regular intervals. The annual costs of these LDAR programs in a typical refinery can exceed US$1,000,000. Previous studies have shown that a majority of controllable fugitive emissions come from a very small fraction of components. The Smart LDAR program aims to find cost-effective methods to monitor and reduce emissions from these large leakers. Optical gas imaging has been identified as one such technology that can help achieve this objective. This paper discusses a refinery evaluation of an instrument based on backscatter absorption gas imaging technology. This portable camera allows an operator to scan components more quickly and image gas leaks in real time. During the evaluation, the instrument was able to identify leaking components that were the source of 97% of the total mass emissions from leaks detected. More than 27,000 components were monitored. This was achieved in far less time than it would have taken using Method 21. In addition, the instrument was able to find leaks from components that are not required to be monitored by the current LDAR regulations. The technology principles and the parameters that affect instrument performance are also discussed in the paper.     

226Ra, 232Th and 40K analysis in soil samples from some areas of Malwa region, Punjab, India using gamma ray spectrometry

The activity concentrations of soil samples collected from thirty different locations of Malwa region of Punjab were determined by using HPGe detector based on high-resolution gamma spectrometry system. The range of activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in the soil from the studied areas varies from 18.37 Bq kg⁻¹ (Sangrur) to 53.11 Bq kg⁻¹ (Sitoguno), 57.28 Bq kg⁻¹ (Dhanola) to 148.28 Bq kg⁻¹ (Sitoguno) and 211.13 Bq kg⁻¹ (Sunam) to 413.27 Bq kg⁻¹ (Virk Khera) with overall mean values of 35 Bq kg⁻¹, 80 Bq kg⁻¹and 317 Bq kg⁻¹ respectively. The absorbed dose rate calculated from activity concentration of ²²⁶Ra, ²³²Th and ⁴⁰K ranges between 8.47 and 24.48, 35.68 and 92.38, and 8.74 and 17.11 nGy h⁻¹, respectively. The total absorbed dose in the study area ranges from 58.08 nGy h⁻¹ to 130.85 nGy h⁻¹ with an average value of 79.11 nGy h⁻¹. The calculated values of external hazard index (H_ex) for the soil samples of the study area range from 0.35 to 0.79. Since these values are lower than unity, therefore, according to the Radiation Protection 112 (European Commission. Radiation Protection 112 1999) report, soil from these regions is safe and can be used as a construction material without posing any significant radiological threat to population.     

Ambient Aerosol and its Carbon Content in Gainesville, a Mid-Scale City in Florida

Ambient aerosols were collected during 2000–2001 in Gainesville, Florida, using a micro-orifice uniform deposit impactor (MOUDI) to study mass size distribution and carbon composition. A bimodal mass distribution was found in every sample with major peaks for aerosols ranging from 0.32 to 0.56 μm, and 3.2 to 5.6 μm in diameter. The two distributions represent the fine mode (<2.5 μm) and the coarse mode (>2.5 μm) of particle size. Averaged over all sites and seasons, coarse particles consisted of 15% carbon while fine particles consisted of 22% carbon. Considerable variation was noted between winter and summer seasons. Smoke from fireplaces in winter appeared to be an important factor for the carbon, especially the elemental carbon contribution. In summer, organic carbon was more abundant. The maximum secondary organic carbon was also found in this season (7.0 μg m⁻³), and the concentration is between those observed in urban areas (15–20 μg m⁻³) and in rural areas (4–5 μg m⁻³). However, unlike in large cities where photochemical activity of anthropogenic emissions are determinants of carbon composition, biogenic sources were likely the key factor in Gainesville. Other critical factors that affect the distribution, shape and concentration were precipitation, brushfire and wind.     

Results of An Indoor Size Fractionated PM School Sampling Program in Libby, Montana

Libby, Montana is the only PM_2.5 nonattainment area in the western United States with the exceptions of parts of southern California. During January through March 2005, a particulate matter (PM) sampling program was conducted within Libby’s elementary and middle schools to establish baseline indoor PM concentrations before a wood stove change-out program is implemented over the next several years. As part of this program, indoor concentrations of PM mass, organic carbon (OC), and elemental carbon (EC) in five different size fractions (>2.5, 1.0–2.5, 0.5–1.0, 0.25–0.5, and <0.25 μm) were measured. Total measured PM mass concentrations were much higher inside the elementary school, with particle size fraction (>2.5, 0.5–1.0, 0.25–0.5, and <0.25 μm) concentrations between 2 and 5 times higher when compared to the middle school. The 1.0–2.5 μm fraction had the largest difference between the two sites, with elementary school concentrations nearly 10 times higher than the middle school values. The carbon component for the schools’ indoor PM was found to be predominantly composed of OC. Measured total OC and EC concentrations, as well as concentrations within individual size fractions, were an average of two to five times higher at the elementary school when compared to the middle school. For the ultrafine fraction (<0.25), EC concentrations were similar between each of the schools. Despite the differences in concentrations between the schools at the various fraction levels, the OC/EC ratio was determined to be similar.     

Validation of a European standard for the determination of hexavalent chromium in solid material

A European standard for the determination of Cr(vi) in solid material has been elaborated in the framework of an international co-operation and finally validated in the course of an interlaboratory comparison. The procedure is based on the alkaline digestion prescribed by EPA method 3060A followed by ion chromatography and determines an operationally defined content of Cr(vi), including water-soluble and insoluble chromates. A preliminary robustness study was carried out in order to compare different extraction methodologies and to study the equivalency of different analytical methods for the determination of Cr(vi) in alkaline extracts of soil and waste materials. During an interlaboratory validation trial with 19 European laboratories a set of 4 samples (2 soil and 2 waste samples) was analysed to determine performance characteristics for different combinations of digestion and detection methods. With the procedures prescribed by the new European standard (EN 15192) acceptable results were obtained for both soil samples and one of the waste samples (sludge). However, for the second waste sample (fly ash) a large deviation in analytical results was observed. This indicates that particularly for waste materials a possible occurrence of strong matrix effects has to be considered and supplementary quality control data are needed in order to assess the validity of analytical results. The accuracy of the determination of Cr(vi) in solid matrices remains a challenging field in terms of maximum extraction efficiency and minimum species interconversion.     

Performance of an electrochemical COD (chemical oxygen demand) sensor with an electrode-surface grinding unit

An electrochemical COD (chemical oxygen demand) sensor using an electrode-surface grinding unit was investigated. The electrolyzing (oxidizing) action of copper on an organic species was used as the basis of the COD measuring sensor. Using a simple three-electrode cell and a surface grinding unit, the organic species is activated by the catalytic action of copper and oxidized at a working electrode, poised at a positive potential. When synthetic wastewater was fed into the system, the measured Coulombic yields were found to be dependent on the COD of the synthetic wastewater. A linear correlation between the Coulombic yields and the COD of the synthetic wastewater was established (10-1000 mg L(-1)) when the electrode-surface grinding procedure was activated briefly at 8 h intervals. When various kinds of wastewater samples obtained from various sewage treatment plants were measured, linear correlations (r(2)> or = 0.92) between the measured EOD (electrochemical oxygen demand) value and COD of the samples were observed. At a practical wastewater treatment plant, the measurement system was successfully operated with high accuracy and good stability over 3 months. These experimental results show that the application of the measurement system would be a rapid and practical method for the determination of COD in water industries.