Waste Fe(III)/Cr(III) hydroxide as adsorbent for the removal of Cr(VI) from aqueous solution and chromium plating industry wastewater

Fe(III)/Cr(III) hydroxide, a waste material from the fertilizer industry, has been used for the adsorption of Cr(VI) from aqueous solution, over a range of initial metal ion concentrations (5-30 mg litre(-1)), agitation times (1-180 min), adsorbent dosages (100-1200 mg per 50 ml), temperatures (24, 29 and 38 degrees C) and pH values (4.5-10). The adsorption of Cr(VI) increased with the initial concentration of Cr(VI) and with temperature. The process of uptake follows both the Langmuir and the Freundlich isotherm models. The applicability of Lagergren and empirical kinetic models has also been investigated. Almost quantitative removal of Cr(VI) at 10 mg litre(-1) in a 50-ml solution by 500 mg of adsorbent was found at an equilibrium pH of 5.6. The efficiency of chromium removal was also tested using wastewater from the chromium plating industry.     

Relation between heavy metal concentrations in salt marsh plants and soil

The aim of the research reported here was to investigate the relation between heavy metal concentrations in salt marsh plants, extractability of the metals from soil and some soil characteristics. In April 1987, Spartina anglica and Aster tripolium plants and soil were collected from four salt marshes along the Dutch coast. The redox potential of the soil between the roots of the plants and at bare sites was measured. Soil samples were oven-dried and analyzed for chloride concentration, pH, fraction of soil particles smaller than 63 microm (f < 63 microm), loss on ignition (LOI) and ammonium acetate and hydrochloric acid extractable Cd, Cu and Zn concentrations. The roots and shoots of the plants were analyzed for Cd, Cu and Zn. Because drying of the soil prior to chemical analysis might have changed the chemical speciation of the metals, and therefore the outcome of the ammonium acetate extraction, a second survey was performed in October 1990. In this survey A. tripolium plants and soil were collected from two salt marshes. Fresh and matched oven-dried soil samples were analyzed for water, ammonium acetate and diethylene triaminepentaacetic acid (DTPA) extractable Cd, Cu and Zn concentrations. The soil samples were also analyzed for f < 63 microm, LOI and total (HNO(3)/HCl digestion) metal concentrations. Soil metal concentrations were correlated with LOI. Drying prior to analysis of the soil had a significant effect on the extractability of the metals with water, ammonium acetate or DTPA. Plant metal concentrations significantly correlated only with some extractable metal concentrations determined in dried soil samples. However, these correlations were not consistently better than with total metal concentrations in the soil. It was concluded that extractions of metals from soil with water, ammonium acetate or DTPA are not better predictors for metal concentrations in salt marsh plants than total metal concentrations, and that a major part of the variation in metal concentrations in the plants cannot be explained by variation in soil composition.     

The use of the cotton-strip assay to assess cellulose decomposition in heavy metal-contaminated sewage sludge-amended soils

Cellulose decomposition in soils amended over twenty year ago with heavy metal-contaminated sewage sludges was assessed by using the cotton-strip assay. The soils of the Luddington Experiment now contain concentrations of Cu, Ni and Zn in selected plots that approximate to or exceed the statutory limits for these elements in sewage sludge-amended soils. The rates of cellulose decomposition were generally lower in the plots with elevated metal concentrations, relative to uncontaminated sludge-amended and unsludged controls. Generally, the metal-rich plots showed reductions in the time taken to reach 50% cotton-tensile-strength loss (CTSL). However, the reductions could not be consistently related to any one metal. The difference in decomposition rates between treatments was systematically reduced over the duration of a time-course experiment. A lower initial population of the appropriate decomposer community of micro-organisms may account for the observed short-term lag in decomposition rates.     

Effects of population density and cadmium toxicity on growth and survival of blowflies

The blowfly Lucilia sericata has been reared on artificial diets containing from 0 to 200 mg Cd kg(-1) at population densities ranging from 8 larvae per 4-g diet to 8 larvae per 32-g diet. Peak larval weight, development period, pupal weight, adult-emergence weight, and fecundity were measured. Larvae of blowflies respond to food deprivation by a reduction in larval weight and subsequent pupal and adult size. Contaminating the food supply with cadmium produced similar additive effects, reduced the growth rate, and increased the age of pupation. The results are of importance in determining the effects of environmental pollutants on population dynamics.     

Susceptibility of different yeast species to environmental toxic metals

The purpose of the study reported here was to investigate the relative resistance of yeast species to various metallic and metalloid ions, with a view to gaining more knowledge on this subject, as resistant species may become dominant in habitats contaminated with the relevant metals. Saccharomyces cerevisiae, Candida albicans and Candida tropicalis were grown in media containing different concentrations of mercury (as HgCl(2)), cadmium (as CdCl(2)), lead (as Pb(CH(3)COO)(2)), arsenic (as Na(2)HAsO(4)) and selenium (as Na(2)SeO(3)) for various intervals. Invariably, the two Candida species turned out to be more resistant to all the metals studied than S. cerevisiae. The metal showing the highest toxicity for these species was mercury, with cadmium being the second, lead, the third and arsenic and selenium being the least toxic elements. Strains showing resistance to mercury were isolated, even in the case of S. cerevisiae.     

Sex-biased lactational duration in a human population and its reproductive costs

Summary We tested the proposition that among humans (1) differences in lactational duration result in differences in costs of reproduction even under rich nutritional conditions; and (2) elimination of factors postulated to favor male-biased parental care will be reflected in elimination or reversal of sex-biased care. To do so, we examined the relationship between lactational duration and fertility among Hutterites, a communal-living human population in which the levels of nutritional resources and fertility are high, breast-feeding is the norm, contraceptive use is limited and the collective social and economic system results in low resource variance among individuals. We demonstrate that even under good nutritional conditions, duration of nursing was a significant predictor of the length of time to next pregnancy and that nursing continued to suppress fertility after the resumption of menses. Moreover, we find that daughters were nursed longer than sons, leading to a longer interval to next pregnancy. We examine this uncommon, but not unique, finding of female-biased human parental care in the light of Hutterite social structure, and we explore the consistency of this finding with the most applicable models of parental investment. Correspondence to: S.W. Margulis     

Population dynamics of Mytilicola intestinalis in Mytilus edulis in south west England

The population dynamics of Mytilicola intestinalis Steuer in mussels (Mytilus edulis L.) from the River Lynher, Cornwall, England, have been studied over 3 years. By transplanting uninfested mussels from the River Erme, South Devon, into the Lynher mussel bed, the study was extended to the growth and development of new infestations under natural conditions. Female Mytilicola intestinalis are shown to breed twice, and two generations of parasites coexist for most of the year, with recruitment taking place in summer and autumn. One generation contributes its first brood to the autumn recruits before overwintering and contributing its second brood to the following summer's recruits. The other generation overwinters as juvenile and immature stages to contribute its two broods successively to the summer and autumn recruits. Environmental temperatures are believed to control the rates of development at all stages rather than acting as triggers in the onset or cessation of breeding at specific times. There is no evidence to support the contention that heavily infested mussels are killed, and parasite mortality is shown to be density-independent.     

Some epidemiologic features of disasters in guatemala

Epidemiological procedures can be organised under disaster conditions by means of a simple surveillance system and with few personnel.
In the aftermath of the 4 February 1976 earthquake in Guatemala, an information system was organized by which the requisite information for decision-making was obtained with adequate speed and promptness.
The initial epidemiologic informution was based on reports collected during the early days on symptoms observed at hospitals and health centers and in localities and villages in the stricken area.
At a second, post-emergency stage a more elaborate surveillance system was instituted to provide guidance in the investigntwn of outbreaks, evaluate the health activities and establish basic criteria for preventive and control measures.     

Transport of particulate matter in natural waters — modelling and in situ-measurements

The significant processes controlling the fate of particulates are convection an dispersion on one hand, and sedimentation on the other hand. Due to inteparticulated reactions, larger aggregates can be formed from smaller units thus changing the sedimentation characteristics. These phenomena are summarized in a mathematical model whereby hydrodynamic effects as well as the control mechanisms of the dissolved phase are included. A relationship was derived on the basis of energy considerations leading to the formulation of a critical sedimentation velocity of the suspensa, which determines the transport capacity of the flowing system. The sedimentation term is calculated from the above discussed transport capacity, hydro-dynamic parameters and suspending media properties. Aggregation effects are taken into account as an increase of sedimentation velocities of the particles. The equations are solved in a particular computational routine such that the horizontal distribution of suspended solids in a natural system can be describe as function of the above discussed phenomena. The model was tested with in situ-measurements. It was found that the observed processes are described satisfactorily by this model.