Determination of protective effect of carob (Ceratonia siliqua L.) extract against cobalt(II) nitrate-induced toxicity

Environmental Science and Pollution Research - Cobalt (Co) is widely used in many industrial fields such as batteries and paints. Cobalt, a dangerous heavy metal, can be found in high...     

Characterisation of PM10, PM2.5 and Benzene Soluble Organic Fraction of Particulate Matter in an Urban Area of Kolkata, India

In this study, the relationship between inhalable particulate (PM₁₀), fine particulate (PM_2.5), coarse particles (PM_{2.5 – 10}) and meteorological parameters such as temperature, relative humidity, solar radiation, wind speed were statistically analyzed and modelled for urban area of Kolkata during winter months of 2003–2004. Ambient air quality was monitored with a sampling frequency of twenty-four hours at three monitoring sites located near traffic intersections and in an industrial area. The monitoring sites were located 3–5 m above ground near highly trafficked and congested areas. The 24 h average PM₁₀ and PM_2.5 samples were collected using Thermo-Andersen high volume samplers and exposed filter papers were extracted and analysed for benzene soluble organic fraction. The ratios between PM_2.5 and PM₁₀ were found to be in the range of 0.6 to 0.92 and the highest ratio was found in the most polluted urban site. Statistical analysis has shown a strong positive correlation between PM₁₀ and PM_2.5 and inverse correlation was observed between particulate matter (PM₁₀ and PM_2.5) and wind speed. Statistical analysis of air quality data shows that PM₁₀ and PM_2.5 are showing poor correlation with temperature, relative humidity and solar radiation. Regression equations for PM₁₀ and PM_2.5 and meteorological parameters were developed. The organic fraction of particulate matter soluble in benzene is an indication of poly aromatic hydrocarbon (PAH) concentration present in particulate matter. The relationship between the benzene soluble organic fraction (BSOF) of inhalable particulate (PM₁₀) and fine particulate (PM_2.5) were analysed for urban area of Kolkata. Significant positive correlation was observed between benzene soluble organic fraction of PM₁₀ (BSM10) and benzene soluble organic fraction of PM_2.5 (BSM2.5). Regression equations for BSM10 and BSM2.5 were developed.     

Estimating sampling frequency in pollen exposure assessment over time

A time series model was fitted to the pollen concentration data collected in the Greater Cincinnati area for the Cincinnati Childhood Allergy and Air Pollution Study (CCAAPS). A traditional time series analysis and temporal variogram approach were applied to the regularly spaced databases (collected in 2003) and irregularly spaced ones (collected in 2002), respectively. The aim was to evaluate the effect of the sampling frequency on the sampling precision in terms of inverse of standard error of the overall level of mean value across time. The presence of high autocorrelation in the data was confirmed and indicated some degree of temporal redundancy in the pollen concentration data. Therefore, it was suggested that sampling frequency could be reduced from once a day to once every several days without a major loss of sampling precision of the overall mean over time. Considering the trade-offs between sampling frequency and the possibility of sampling bias increasing with larger sampling interval, we recommend that the sampling interval should take values from 3 to 5 days for the pollen monitoring program, if the goal is to track the long-term average.     

A Screening Test for the Determination of Ethylene Sensitivity

Ethephon, which releases ethylene within plant tissues after application, was chosen to perform assessments of the relative sensitivity of crops to ethylene and to determine which stages of plant development were most sensitive. The species chosen were: barley, wheat, oats, canola and field pea, all of which are important crops in the province of Alberta, Canada. Plants were treated with ethephon at one of 7 different stages. Plants were assessed for their vegetative and reproductive growth, including height, biomass, yield and seed quality. Visual symptoms were photographed and documented to compare them with symptoms caused by ethylene applied as a gas. It was concluded that in barley, wheat and canola the late vegetative and early reproductive stages were most sensitive, at least when sensitivity was defined as reductions in yield and quality. As for field pea, ethephon had no effect on yield but did cause increased numbers of pods, which in certain conditions could lead to increased yields. Significant effects on vegetative growth were only observed in the early vegetative stages of development but with no effects on yield. The screening protocol successfully identified sensitive cultivars and growth stages for further investigation of the effects of ethylene exposure.     

Cancer and Non-Cancer Health Risk from Eating Cassava Grown in Some Mining Communities in Ghana

Food crops such as cassava, cocoyam and other tuber crops grown in mining communities uptake toxic or hazardous chemicals such as arsenic, and cadmium, from the soil. Cassava is a stable food for Ghanaians. This study evaluated human health risk from eating cassava grown in some mining communities in Ghana such as Bogoso, Prestea, Tarkwa and Tamso, which are important mining towns in the Western Region of Ghana. The study evaluated cancer and non-cancer health effects from eating cassava grown in the study areas in accordance with US Environmental Protection Agency’s Risk Assessment guidelines. The results of the study revealed the following: cancer health risk for Tamso, 0.098 (RME – Reasonable Maximum Exposure) and 0.082 (CTE – Central Tendency Exposure). This means that approximately 10 and 8 out of 100 resident adults are likely to suffer from cancer related cases by RME and CTE parameters respectively. For Prestea, we have 0.010 and 0.12, which also means that approximately 1 out of 100 and 10 resident adults out of 100 are also likely to suffer from cancer related diseases by RME and CTE parameters. The results of the study obtained were found to be above the acceptable cancer risk range of 1× 10⁻⁶ to 1× 10⁻⁴, i.e., 1 case of cancer out of 1 million or 100,000 people respectively.     

SAOZ measurements of NO2 at Aberystwyth

We present in this paper fifteen years' measurements, from March 1991 to September 2005, of stratospheric NO2 vertical columns measured by a SAOZ zenith-sky visible spectrometer. The instrument spent most of its time at Aberystwyth, Wales, with occasional excursions to other locations. The data have been analysed with the WinDOAS analysis program with low-temperature high-resolution NO2 cross-sections and fitting a slit function to each spectrum. Because of a change in detector in May 1998 there is some uncertainty about the relative changes before and after this date, which are partially constrained by the results of an intercomparison exercise. However, the effect of the Mt Pinatubo aerosol cloud is very evident in the data from 1991-94, with a decrease of 10% in NO2 in the summer of 1992 (the SAOZ was located in Lerwick, Scotland during the winter of 1991-92 and observed very low NO2 values but these cannot be directly compared to the Aberystwyth data). To focus more on interannual and long-term variations in NO2, a seasonal variation comprising an annual and semi-annual component was fitted to the morning and evening twilight separately from 1995 to the present. This fit yielded average NO2 columns of 4.08 x 10(15) cm(-2) and 2.68 x 10(15) cm(-2) for the evening and morning twilight, respectively, with a corresponding annual amplitude of +/-2.08 x 10(15) cm(-2) and +/-1.50 x 10(15) cm(-2). Departures from the fitted curve show a trend of 6% per decade, consistent with that reported elsewhere, for the period 1998-2003, but in the past two years a distinct interannual variation of amplitude of approximately 8% has emerged.     

The Metallic Composition of Aerosols at Three Monitoring Sites in Korea During Winter 2002

In the present study, the distribution patterns of various metals were analyzed and compared using PM samples collected concurrently from three monitoring sites located in Korea (Seoul, Busan, and Jeju island) in December 2002. As these sites can represent metal pollution with different degrees of anthropogenic activities, their concentration levels were distinguished in a systematic manner in the order of Jeju, Busan, and Seoul. By comparing the present data sets with those measured previously from other locations in Korea and around the world, we attempted to diagnose the general status of elemental pollution on the Korean peninsula. Through an application of different statistical approaches, the major processes controlling elemental levels were assessed for each of the three study sites. The results indicated the importance of both crustal and anthropogenic sources in all sites with their relative roles varying significantly from each other. The results of the metal analysis data, when examined in relation to back trajectory analysis, confirmed that their concentration changes are affected quite sensitively with air mass movement patterns. The overall results of this study consistently indicated the contribution of a strong anthropogenic source area (e.g., China) to the observed metal concentration levels in the study area, but the strengths of such signals vary considerably across the Korean peninsula.     

The use of bioaccumulation, biomarkers and histopathology diseases in shape Procambarus clarkii to establish bioavailability of Cd and Zn after a mining spill

Individuals of the crayfish Procambarus clarkii (males and females) were exposed simultaneously to cadmium and zinc during 21 days. Exposure concentrations were those determined at the Guadiamar river after the Aznalcóllar mining spill (SW, Spain): 10 and 30 μg L⁻¹ of cadmium and 1000 and 3000 μg L⁻¹ of zinc. Three biomarkers (MT: metallothioneins like proteins, VTG: vitellogenin/vitellin like proteins and histopathology) together with heavy metal bioaccumulation were determined in soft tissues of male and female P. clarkii. At the concentrations tested, increasing cadmium exposure resulted in increasing cadmium bioaccumulation and increasing subletal effects (induction of MT, VTG and histopathological damage in tissues). Nevertheless, although increasing zinc exposure showed increasing VTG induction and histopathological damages, not a positive relationship was determined with MT induction. Concerning to responses determined in male and female crayfishes only differences were found between sexes at the highest cadmium exposure concentration related to bioaccumulation in hepatopancreas tissues. Biomarkers responses to heavy metal contamination in this crayfish, even VTG induction not before tested in heavy metal contamination assessment in crustaceans resulted potential tools for the monitoring of heavy metal environmental contamination.     

Community-Based Environmental Management in Atlantic Canada: The Impacts and Spheres of Influence of the Atlantic Coastal Action Program

The Atlantic Coastal Action Program (ACAP) is a unique, community-based program initiated by Environment Canada in 1991 to help Atlantic Canadians restore and sustain watersheds and adjacent coastal areas. ACAP is the eastem-most Environment Canada Ecosystem Initiative. The ACAP family is currently made up of 14 ecosystem-based organizations in the four Atlantic provinces. Each one of these non-profit organizations operates independently, but is formally linked under the umbrella of ACAP to represent a force stronger than the individual parts. In Environment Canada's experience, the program consistently demonstrates the value of a community-based approach and produces results on an ecosystem basis. This paper will examine some of the impacts of ACAP in terms of economics, credible community science, and environmental results which most often align with Environment Canada's objectives. It will explore the influences of the community-based approach to environmental management on multiple scales (local, regional, etc.). Through examples, the paper will demonstrate the effectiveness of ACAP in influencing some of the policies, programs and attitudes of various levels of government and industry in the region, as well as describe how the community-based model has been exported internationally. The paper will conclude with a discussion on a planned path forward for ACAP.     

Linking Water Science to Policy: Results from a Series of National Workshops on Water

To ensure science better informs the decision-making process, researchers and policy/program managers need to understand and respect each other's way of working, culture and operational timelines. However, there is little practical guidance on how this should be done and even less documented experience with specific mechanisms that better link these two groups. The published literature on information transfer has largely emphasized the dissemination of standard packages of information to ill-defined constituencies whose needs for scientific information are not well understood. Environment Canada's National Water Research Institute, on behalf of the Canadian Council of Ministers of the Environment, led a series of “Linking Water Science to Policy Workshops” as one such mechanism by which recent science could be delivered to practitioners, and practitioners could identify their research needs to scientists and research managers. There is a pressing need to explore and share experiences using creative mechanisms for sustained dialogue and networking between scientists and policy and program managers. The lessons learned from the workshop series and the need for science to continually inform the decision-making process has particular relevance for Canada's Ecosystem Initiatives given their integrated, place-based focus on long-term restoration and protection, and the challenge of continually changing ecosystems.The Canadian Crown reserves the right to retain a non-exclusive, royalty free licence in and to any copyright.