Total versus inhalable sampler comparison study for the determination of asphalt fume exposures within the road paving industry

Exposure to asphalt fumes has a threshold limit value (TLV of 0.5 mg m(-3) (benzene extractable inhalable particulate) as recommended by the American Conference of Governmental Industrial Hygienists (ACGIH). This reflects a recent change (2000) whereby two variables are different from the previous recommendation. First is a 10-fold reduction in quantity from 5 mg m(-3) to 0.5 mg m(-3). Secondly, the new TLV specifies the "inhalable" fraction as compared to what is presumed to be total particulate. To assess the impact of these changes, this study compares the differences between measurements of paving asphalt fume exposure in the field using an "inhalable" instrument versus the historically used 'total' sampler. Particle size is also examined to assist in the understanding of the aerodynamic collection differences as related to asphalt fumes and confounders. Results show that when exposures are limited to asphalt fumes, a 1:1 relationship exists between samplers, showing no statistically significant differences in benzene soluble matter (BSM). This means that for the asphalt fume ACGIH TLV, the 'total' 37-mm sampler is an equivalent method to the "inhalable" method, referred to as IOM (Institute of Occupational Medicine), and should be acceptable for use against the TLV. However, the study found that when confounders (dust or old asphalt millings) are present in the workplace, there can be significant differences between the two samplers' reported exposure. The ratio of IOM/Total was 1.37 for milling asphalt sites, 1.41 for asphalt paving over granular base, and 1.02 for asphalt over asphalt pavements.     

A Metamodeling Approach for Integrated Assessment of Air Quality Policies

A method is proposed to build integrated models (also called Metamodels) aimed at quantifying the economic efficiency of air quality policies. This Metamodeling approach is based on the coupling of two complementary models, that operate at different scales in space and time, and which represent the economic and the physical and chemical processes, respectively. The joint consideration of the physico-chemical and techno-economic structure of the pollution control problems permits a comprehensive evaluation of air pollution abatement strategies. The motivating pollution control problems include urban-regional air quality management through efficient energy and traffic control policies. A pilot study, exploiting data collected in the Geneva canton (Switzerland), is used to demonstrate the potential of the approach.     

Utility of dynamics as indicators of stress in population models

The relationships between the dynamics of environmentally and chemically stressed populations and indicators of the effects of the stressor are explored in a model framework. The physiologically structured population, represented by a system of McKendrick–von Foerster hyperbolic partial differential equations, includes the dynamics of numerous individuals distinguished by ecotype. Chemical uptake of nonpolar narcotics is modeled by first order kinetics. Classical methodologies, frequency analysis and phase space reconstruction, are explored in a search for indicators of magnitude of stress. When these techniques proved generally unsuccessful for the objective of indicator selection in our model setting, summary statistics, as related to bifurcation diagrams, were constructed and appear more useful as indicators. It is concluded that physiological structures generally lead to more feasible measurable indicators of magnitude of stress than do specifics of population dynamics.     

Fractionation of butyltin species during sample extraction and preparation for analysis

Solvent extraction and evaporative concentration steps are often used in procedures for the measurement of butyltins in environmental samples. As part of a larger study utilizing radiolabeled butyltins, the loss and fractionation of butyltins during sample preparation was investigated. TBT, DBT, and MBT were extracted from acidified seawater by hexane with efficiencies of about 95–99, 50–60 and 11% respectively. In addition, losses of about 70% of DBT were found during evaporative concentration of hexane. A variety of sediment extraction procedures were tested and none were found to be highly efficient for total butyltin extraction.     

Biodegradability: An assessment of commercial polymers according to the Canadian method for anaerobic conditions

The degradation of several biodegradable polymers was measured as a result of exposure to an anaerobic medium. The polymers investigated included materials based upon polylactic acid, polylactone, and poly(hydroxy butyrate/valerate) as well as those incorporating starch-based materials. The degradation was monitored by methane and carbon dioxide evolution. In addition, the physical and chemical changes were noted as a result of exposure. These measurements included changes in mass, dimension, and molecular weight. FTIR, UV-vis, proton, and¹³C NMR spectra were also recorded prior to and after exposure. The results clearly indicated that several biological and chemical degradation processes were occurring with the biodegradable polymers studied.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Issued as NRCC No. 37549.     

Genetic population structure of the recently introduced Asian clam,Potamocorbula amurensis,in San Francisco Bay

The genetic population structure of the recently introduced Asian clam, Potamocorbula amurensis, in San Francisco Bay was described using starch gel electrophoresis at eight presumptive loci. Specimens were taken from five environmentally distinct sites located throughout the bay. The population maintains a high degree of genetic variation, with a mean heterozygosity of 0.295, a mean polymorphism of 0.75, and an average of 3.70 alleles per locus. The population is genetically homogeneous, as evidenced from genetic distance values and F-statistics. However, heterogeneity of populations was indicated from a contingency chi-square test. Significant deviations from Hardy-Weinberg equilibrium and heterozygote deficiencies were found at the Lap-1 locus for all populations and at the Lap-2 locus for a single population. High levels of variability could represent a universal characteristic of invading species, the levels of variability in the source population(s), and/or the dynamics of the introduction. Lack of differentiation between subpopulations may be due to the immaturity of the San Francisco Bay population, the general purpose phenotype genetic strategy of the species, high rates of gene flow in the population, and/or the selective neutrality of the loci investigated.     

Structural and functional responses of a freshwater plankton community to acute copper stress

An in-situ experiment was performed to quantify the impacts of copper sulfate on plankton structure and carbon dynamics. Plankton were exposed to 140 microg litre(-1) copper in quadruplicate mesocosms. Community structure was monitored for 14 days by microscopical counts and compared with untreated controls. Carbon dynamics were assessed by tracer studies using (14)C bicarbonate and (14)C glucose, to follow the fate of carbon in the algal- and bacterial-based pathways, respectively. Copper reduced the dry-weight biomass of zooplankton, ciliates, flagellates, and autotrophic phytoplankton. Bacterial biomass was increased by an order of magnitude relative to the controls. The bacterial response was most likely due to reduced grazing pressure and/or nutrient release from dying plankton. Copper reduced the effectiveness of the food web in transporting carbon to the surviving zooplankton. Bacterial-based pathways were more greatly affected than algal-based pathways, because zooplankton in the copper treatment were macro-grazers (cyclopoids), which cannot utilize bacteria.     

Book reviews

Cost Benefit Analysis of Environmental Change

Per‐Olov Johansson

Cambridge, Cambridge University Press, 1993, 232 pp., £13.95

Computerised Environmental Modelling: A Practical Introduction using Excel

J. Hardisty, D. M. Taylor & S. E. Metcalfe

Chichester, Wiley, 1993, 204 pp., £14.95

Keeping Pace with Science and Engineering: Case Studies in Environmental Regulation

Washington DC, US National Academy of Engineering, 1993

World Without End: Economics, Environment and Sustainable Development

D. W. Pearce & J. J. Warford

Oxford University Press, New York, 1993, 440 pp., £35.95     

Phytomonitoring and management of tar piles on the Qatari coastal marshes, Arabian Gulf

Most of the shores in Qatar and other oil producing countries have had a long history of crude oil pollution from different sources. This pilot study was to assess the problem and suggest a management programme for disposing of the collected tar or lessening the impact of tar accumulation. The vegetation on the sites used for dumping tar was used in a field survey to identify bioindicators of tar pollution and of the natural recovery of polluted sites. The phytomonitoring results indicate that recovery of polluted sites can be quite rapid after clean-up and restoration. To facilitate natural plant invasion and colonization, and the restoration of tar piles, the dumping sites must have plant communities with high species diversity and a high percentage of annual plants. Depending on the sand-tar ratio in the piles, artificial seeding of selected plant species (listed) can be applied by using species mixes or single species seeding. Management techniques are suggested to optimize the natural recovery and revegetation of tar-affected coastal marshes.     

The effect of catch crops on sulphate leaching and availability of S in the succeeding crop on sandy loam soil in Denmark

Sulphate leaching losses may reduce the long-term possibility of maintaining the S supply of crops in low input farming systems. The ability of catch crops (Italian ryegrass (Lolium multiflorum Lam), winter rape (Brassica napus L.) and fodder radish (Raphanus sativus L.)) to reduce soil sulphate concentrations in autumn and make it available to a succeeding crop was investigated in 1996–1998 on sandy loam soil in Denmark. All catch crops reduced soil sulphate concentrations in the autumn compared to bare soil. Especially, the cruciferous catch crops had the ability to deplete efficiently soil sulphate levels and thus, reduce the sulphate leaching potential. The S uptake in aboveground catch crop was 8, 22 and 36 kg S per ha for ryegrass, winter rape and fodder radish, respectively. In the following spring, sulphate levels of the autumn bare soil were low in the top 0.5 m and a peak of sulphate was found at 0.75–1 m depth. In contrast, where a fodder radish catch crop had been grown, high sulphate levels were present in the top 0.5 m, but only small amounts of sulphate were found at 0.5–1.5 m depth. In spring barley (Hordeum vulgare L.), that followed catch crops, S concentrations at heading and maturity revealed that the availability of soil S increased following winter rape and fodder radish, whereas there were indications that following ryegrass, the S availability was reduced compared to bare soil. This initial study showed that catch crops have a high potential for reducing sulphate leaching and may be used to synchronise S availability with plant demand in a crop rotation.