Removal of uranium(VI) from contaminated sediments by surfactants

Uranium(VI) sorption onto a soil collected at the Melton Branch Watershed (Oak Ridge National Laboratory, TN) is strongly influenced by the pH of the soil solution and, to a lesser extent, by the presence of calcium, suggesting specific chemical interactions between U(VI) and the soil matrix. Batch experiments designed to evaluate factors controlling desorption indicate that two anionic surfactants, AOK and T77, at concentrations ranging from 60 to 200 mM, are most suitable for U(VI) removal from acidic soils such as the Oak Ridge sediment. These surfactants are very efficient solubilizing agents at low uranium concentrations: ca. 100% U(VI) removal for [U(VI)]o,sorbed = 10(-6) mol kg-1. At greater uranium concentrations (e.g., [U(VI)]o,sorbed = ca. 10(-5) mol kg-1), the desorption efficiency of the surfactant solutions increases with an increase in surfactant concentration and reaches a plateau of 75 to 80% of the U(VI) initially sorbed. The most probable mechanisms responsible for U(VI) desorption include cation exchange in the electric double layer surrounding the micelles and, to a lesser extent, dissolution of the soil matrix. Limitations associated with the surfactant treatment include loss of surfactants onto the soil (sorption) and greater affinity between U(VI) and the soil matrix at large soil to liquid ratios. Parallel experiments with H2SO4 and carbonate-bicarbonate (CB) solutions indicate that these more conventional methods suffer from strong matrix dissolution with the acid and reduced desorption efficiency with CB due to the buffering capacity of the acidic soil.     

Phosphorus sorption characteristics of estuarine sediments under different redox conditions

Phosphorus (P) plays a major role in eutrophication of aquatic systems. Estuarine sediments could function as sources or sinks for P to the overlying water column depending upon their physico-chemical characteristics. Understanding of P sorption phenomena in estuarine sediments is important in regulating the P availability in estuaries. Phosphorus sorption characteristics of sediments from the Indian River Lagoon, Florida, USA, were determined to examine the role of selected physico-chemical properties of the sediments on soluble reactive P status in estuary water. Mean equilibrium P concentrations (EPCo) of 0.75 mg L(-1) and mean P sorption maxima (Smax) of 32.2 mg kg(-1) were obtained under anaerobic conditions, compared with EPCo of 0.05 mg L(-1) and Smax of 132.7 mg kg(-1) under aerobic conditions. The higher EPCo values under anaerobic conditions and the greater Smax values under aerobic conditions were associated with amorphous and poorly crystalline iron. These results suggest that sediments enriched with amorphous and poorly crystalline forms of iron act as an excellent reservoir for P by adsorbing excessive P in aerobic sediment zones and releasing it upon burial under anaerobic conditions. This study also indicates that P compounds in sediments independently maintain equilibrium with P in solutions. Thus, heterogeneous systems like soil and sediment simply behave as a mixture of homogeneous surfaces as far as their P sorption characteristics are concerned, and hence can be successfully described by the Langmuir and Freundlich models.     

Three-dimensional nickel ion transport through porous media using magnetic resonance imaging

The transport of Ni2+ ions in a column, filled with porous media, was observed in three dimensions and time by magnetic resonance imaging (MRI) in a clinical scanner. For porous media we used glass beads or quartz sand in a saturated continuous flow mode. The magnetic moment of Ni2+ decreased the T1 relaxation time of 1H in aqueous solution. This concentration-dependent effect was used by a fast low angle shot (FLASH) MRI sequence for imaging the concentration of the dissolved ions. Since Ni2+ behaves as a conservative tracer under the chosen conditions, the tracer motion was representative for the water flow in the porous medium. Currently, we can achieve an isotropic spatial resolution of 1.5 mm and a temporal resolution of 170 s. The transport observation gives direct access to hydraulic flow properties of the porous media. The fluid flow velocity field was calculated by a fronttracking method and the statistical properties of the velocities were investigated. We also compared the experimental data with the three-dimensional particle tracking model PARTRACE, which uses the experimental flow field as input.     

Assessing Biological Integrity Using Freshwater Fish and Decapod Habitat Selection Functions

Comparison between the number of taxa observed and the number expected in the absence of human impact is an easily understood and ecologically meaningful measure of biological integrity. This approach has been successfully applied to the assessment of the biological quality of flowing water sites using macroinvertebrates with the river invertebrate and classification system (RIVPACS) and its derivatives. In this paper, we develop a method similar to the RIVPACS predictive model approach to assess biological integrity at flowing-water sites using freshwater fish and decapod assemblages. We extend the RIVPACS approach by avoiding the biotic classification step and model each of the individual species separately. These assemblages were sampled at 118 least impacted (reference) sites in the Auckland region, New Zealand. Individual discriminant models based on the presence or absence of the 12 most common fish and decapod species were developed. Using the models, predictions were made using environmental measures at new sites to yield the probability of the capture of each of the 12 species, and these were combined to predict the assemblage expected at sites. The expected assemblage was compared to that observed using an observed over expected ratio (O/E). The models were evaluated using a number of internal tests including jackknifing, data partitioning, and the degree to which O/E values differed between reference sites and a set of sites perceived to be impaired by human impacts.     

Strategies for sustainable development of the small-scale gold and diamond mining industry of Ghana

The small-scale gold and diamonds mining industry is of great importance to Ghana. Since its regularization in 1989 the sector has produced and sold over 1.5 million troy ounces of gold and 8.0 million carats of diamonds. During the same period the sector also provided direct employment to over 100,000 people and improved the socioeconomic life of many individuals and communities. However, these were largely achieved at a cost to the environment in areas where mining is carried out and there is the need to develop the industry in a sustainable manner. This paper looks at the developments in the small-scale gold and diamonds mining industry in Ghana and proposes some strategies on how the concepts of sustainable development could be applied to the industry.     

Economic simulation modeling of reprocessing alternatives for corn masa byproducts

Increasing production of corn masa for tortillas, chips, and related snack foods is resulting in large quantities of organic residuals requiring environmentally sound management. These byproduct streams appear suitable for use as livestock feed material, thus eliminating landfilling costs. Possibilities for developing livestock feed include direct shipping to livestock feeding facilities, blending prior to shipping, extrusion processing, pellet mill processing, and dehydration. To assess the viability of these options for reprocessing masa byproducts as livestock feed materials, an economic model was developed and applied to each of these alternatives. Through a series of simulation runs with this model, it was determined that direct shipping was by far the most inexpensive means of recycling masa processing residuals (10–57 $/Mg). Other alternatives examined in increasing order of costs included blending prior to shipping, extrusion, pellet mill processing (3–15, 5–18, and 4–18 times greater than direct shipping, respectively), while dehydration was clearly cost-prohibitive (33–81 times greater). Bagged feed was slightly more expensive to produce than bulk feed (1.1 times greater), and reprocessing costs increased as delivery distance increased, due to increased labor, equipment, and fuel costs, but decreased as byproduct generation rate increased, due to the development of the economies of scale. Alternately, based on a tipping fee of 50 $/Mg, the total estimated cost to landfill ranged from 65 to 112 $/Mg. Based on this cost analysis, direct shipping and feeding to livestock is the recycling option of choice for masa processing byproducts. Although specific details of process configurations and associated costs will vary, similar results are likely for other high moisture food processing residuals destined for utilization as livestock feed or components thereof.     

An environmental threshold for degree of phosphorus saturation in sandy soils

There is critical need for a practical indicator to assess the potential for phosphorus (P) movement from a given site to surface waters, either via surface runoff or subsurface drainage. The degree of phosphorus saturation (DPS), which relates a measure of P already adsorbed by a soil to its P adsorption capacity, could be a good indicator of that soil's P release capability. Our primary objective was to find a suitable analytical protocol for determining DPS and to examine the possibility of defining a threshold DPS value for Florida's sandy soils. Four farmer-owned dairy sprayfields were selected within the Suwannee River basin and soil profiles were randomly obtained from each site, as well as from adjacent unimpacted sites. The soil samples were divided either by horizon or depth, and DPS was determined for each soil sample using ammonium-oxalate (DPS(Ox)), Mehlich-1 (DPS(M1)), and Mehlich-3 (DPS(M3)) extracts. All methods of DPS calculations were linearly related to one another (r2 > 0.94). Relationships between water-soluble P and DPS indicate that the respective change points are: DPS(Ox) = 20%, DPS(M1) = 20%, and DPS(M3) = 16%. These relationships include samples from Ap, E, and Bt horizons, and various combinations thereof, suggesting that DPS values can be used as predictors of P loss from a soil irrespective of the depth of the soil within a profile. Taking into consideration the change points, confidence intervals, agronomic soil test values, and DPS values from other studies, we suggest replacing Mehlich-1 P values in the Florida P Index with the three DPS categories (DPS(M1) = <30, 30-60, and >60%) to assign different P loss ratings in the P Index.     

Effects of calibration on L-THIA GIS runoff and pollutant estimation

Urbanization can result in alteration of a watershed's hydrologic response and water quality. To simulate hydrologic and water quality impacts of land use changes, the Long-Term Hydrologic Impact Assessment (L-THIA) system has been used. The L-THIA system estimates pollutant loading based on direct runoff quantity and land use based pollutant coefficients. The accurate estimation of direct runoff is important in assessing water quality impacts of land use changes. An automated program was developed to calibrate the L-THIA model using the millions of curve number (CN) combinations associated with land uses and hydrologic soil groups. L-THIA calibration for the Little Eagle Creek (LEC) watershed near Indianapolis, Indiana was performed using land use data for 1991 and daily rainfall data for six months of 1991 (January 1-June 30) to minimize errors associated with use of different temporal land use data and rainfall data. For the calibration period, the Nash-Sutcliffe coefficient was 0.60 for estimated and observed direct runoff. The calibrated CN values were used for validation of the model for the same year (July 1-December 31), and the Nash-Sutcliffe coefficient was 0.60 for estimated and observed direct runoff. The Nash-Sutcliffe coefficient was 0.52 for January 1, 1991 to December 31, 1991 using uncalibrated CN values. As shown in this study, the use of better input parameters for the L-THIA model can improve accuracy. The effects on direct runoff and pollutant estimation of the calibrated CN values in the L-THIA model were investigated for the LEC. Following calibration, the estimated average annual direct runoff for the LEC watershed increased by 34%, total nitrogen by 24%, total phosphorus by 22%, and total lead by 43%. This study demonstrates that the L-THIA model should be calibrated and validated prior to application in a particular watershed to more accurately assess the effects of land use changes on hydrology and water quality.     

Visitor-induced changes in the chemical composition of soils in backcountry areas of Mt Robson Provincial Park, British Columbia, Canada

Balancing recreation and conservation is an important issue in Canada's parks and protected areas. Increased levels of visitation to parks, especially to backcountry areas, create undue pressure on natural resources, resulting in a variety of ecological impacts. This paper illustrates the issue of visitor-induced changes on the chemical composition of soils in Mt Robson Provincial Park, British Columbia. Soil samples were collected from dish wash stations and fire pits (disturbed sites) at seven campgrounds located along two popular backcountry trails, and were compared to samples obtained from adjacent undisturbed control sites. Analysis of soil samples suggest that the lower amounts of aluminum, potassium, magnesium and sodium in many of the 'disturbed' samples can be related to intense leaching in dish wash stations, and can be attributed to frequent disposal of waste water from washing and cooking activities. Soils in wash stations generally had higher phosphorus, copper and zinc contents as compared to controls. Soils in fire pits were elevated in copper, relative to controls. Results of this study support park regulations that waste water disposal and camp fires be restricted to designated areas. Informing the public of scientific studies helps them understand the consequences of their activities; this may help persuade them to observe park rules and regulations.     

Managing disposal of water produced with petroleum in Kuwait

Disposal of water produced with petroleum has been of great interest in Kuwait for the last 20 years. The current problem arose when the Burgan oil field, which is the second largest field in the world, experienced successive increases in the water content of the produced oil. This study introduces a decision-making analysis of the considered alternatives for the disposal of the produced water. Four alternative solutions exist for the industry as practical solutions for the disposal of water produced in Kuwait. The first method utilizes a large number of pits to discharge water. The second alternative depends on discharging water into sealed pits. The third approach to dispose water is by injecting the water underground. The last method is similar to the previous one, but takes into consideration the recovery of reservoir pressure to maintain the rate of oil production. A questionnaire was distributed to 48 experts at the top management level of the petroleum companies and the governmental authority. The data collected considered cost, efficiency, and environmental parameters. Based on the data, a statistical analysis was conducted using the factor analysis method to reduce the number of investigated variables. The analysis concluded that the optimal solution is to use the effluent injection method to discharge water produced with oil in Burgan and similar fields in Kuwait.