The removal of lignin and phenol from paper mill effluents by electrocoagulation

This study aims to investigate the treatment of paper mill effluents using electrocoagulation. Removal of lignin, phenol, chemical oxygen demand (COD) and biological oxygen demand (BOD) from paper mill effluents was investigated at various current intensities by using different electrodes (Al and Fe) and at various electrolysis times (1.0, 2.5, 5.0 and 7.5min). It was observed that the experiments carried out at 12V, an electrolysis time of 2min and a current intensity of 77.13mA were sufficient for the removal of these pollutants with each electrode. The removal capacities of the process using an Al electrode were 80% of lignin, 98% of phenol, 70% of BOD, and 75% of COD after 7.5min. Using an Fe electrode the removal capacities were 92%, 93%, 80% and 55%, respectively. In addition, it was found that removal of lignin, phenol, BOD and COD increased with increasing current intensity. In the experiments carried out at different current intensities, higher removal can be explained through a decrease in intra-resistance of solution and consequently an increase at the transfer speed of organic species to electrodes. It was also found that Al electrode performs higher efficiency than Fe electrode except for COD removal. However, the time required for removal of BOD was more than that of COD. The results suggest that electrocoagulation could be considered as an effective alternative to paper mill effluents treatment.     

Non-target effect of organic insecticides: effect of two plant extracts on soil microbial biomass and enzymatic activities in soil

Efficacious botanical derivatives can provide an alternative to synthetic pesticides for organic farming systems. However, there is lack of information regarding the side effects of organic pesticides on key soil ecological processes. In this study, we investigated the effects of aqueous extracts from Urginea maritima and Euphorbia myrsinites exhibiting translaminar and systemic activity against pests on microbial biomass and enzymatic activities in soil. Two grams of plant material was extracted with 100 ml of water and then diluted 1:100, 2:100, and 4:100 with distilled water. Diluted plant extracts were applied around hypocotyl of tomato by soil drench. The effect of both plant extracts on microbial biomass C, amount of total N and organic C, and enzymatic activity in soil was significant. After the last application, the highest microbial biomass C was determined in the lowest U. maritima concentration (U 1:100). Soils treated with the highest concentration of U. maritima (U 4:100) had always lower SMBC content than control soil. All concentrations of E. myrsinites decreased microbial biomass C by 18% to 27% compared to the control. Total nitrogen and organic carbon decreased in soils without (control) and with treated U. maritima extract from first application to last application. Phosphatase, urease, and β-glucosidase activities were monitored in plant extract-treated soils. Except U. maritima 1:100 treatments of second and fourth applications, the other treatments of plant extracts negatively affected enzymatic activity in soil. U. maritima and E. myrsinites plant extracts exhibited different effects on soil microbial biomass and activity, probably because of their different chemical contents.     

Solid phase extraction of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) ions with 1-(2-thiazolylazo)-2-naphthol loaded Amberlite XAD-1180

A new method for separation and preconcentration of trace amounts of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) ions in various matrices was proposed. The method is based on the adsorption and chelation of the metal ions on a column containing Amberlite XAD-1180 resin impregnated with 1-(2-thiazolylazo)-2-naphthol (TAN) reagent prior to their determination by flame atomic absorption spectrometry (FAAS). The effect of pH, type, concentration and volume of eluent, sample volume, flow rates of sample and elution solutions, and interfering ions have been investigated. The optimum pH for simultaneous retention of all the metal ions was 9. Eluent for quantitative elution was 20 ml of 2 mol l(-1) HNO(3). The optimum sample and eluent flow rates were found as 4 ml min(-1), and also sample volume was 500 ml, except for Mn (87% recovery). The sorption capacity of the resin was found to be 0.77, 0.41, 0.57, and 0.30 mg g(-1) for Cu(II), Ni(II), Cd(II), and Mn(II), respectively. The preconcentration factor of the method was 200 for Cu(II), 150 for Pb(II), 100 for Cd(II) and Ni(II), and 50 for Mn(II). The recovery values for all of the metal ions were > or = 95% and relative standard deviations (RSDs) were < or = 5.1%. The detection limit values were in the range of 0.03 and 1.19 microg l(-1). The accuracy of the method was confirmed by analysing the certified reference materials (TMDA 54.4 fortified lake water and GBW 07605 tea samples) and the recovery studies. This procedure was applied to the determination of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) in waste water and lake water samples.     

Assessment of natural radiation exposure levels and mass attenuation coefficients of lime and gypsum samples used in Turkey

The activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K in lime and gypsum samples used as building materials in Turkey were measured using gamma spectrometry. The mean activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K were found to be 38 ± 16, 20 ± 9, and 156 ± 54 Bq kg^???1 for lime and found to be 17 ± 6, 13 ± 5, and 429 ± 24 Bq kg^???1 for gypsum, respectively. The radiological hazards due to the natural radioactivity in the samples were inferred from calculations of radium equivalent activities (Ra_eq), indoor absorbed dose rate in the air, the annual effective dose, and gamma and alpha indices. These radiological parameters were evaluated and compared with the internationally recommended limits. The experimental mass attenuation coefficients (μ/ρ) of the samples were determined in the energy range 81–1,332 keV. The experimental mass attenuation coefficients were compared with theoretical values obtained using XCOM. It is found that the calculated values and the experimental results are in good agreement.     

The assessment of the relationship between various waterscapes and outdoor activities: Edirne,Turkey

The environment is very important in terms of the behaviours and actions of human beings, and activity–environment correlation is used frequently in outdoor arrangements. The environment must meet the requirements and expectations of society. Outdoor activities are the activities that contribute to the well-being of human beings in physical (heartbeat, respiration, blood pressure, etc.) (Ulrich, Journal of Environmental Psychology 11:210–230, 1991), psychological (fear, anxiety, depression, loneliness, stress, etc.) (Marcus and Barnes 1999) and behavioural (insomnia, nervousness, restlessness, passivity, etc.) (Ulrich 1999) terms. It is known that human beings are affected significantly by the environments they are in, and more importantly, it is known that the environment they are in affects their happiness status. The causes of this effect are the features and appearances of the spatial elements and components that mainly make up such environments. One of the elements that is used frequently in landscape is water. If one examines designed or natural open spaces, it may be observed that water has very distinctive features. Dynamic (in the form of a leak, with intense flow rate, cascade, foamy, squirting, jet, graded, etc.) and still water elements may be used with sculptures, plants, rocks and elevations (on land). This study aims to reveal which age groups of students enjoy the different types of activities with regards to water features and emotional associations that motion and characteristics of water bring out in human beings and also to reveal the water preferences of human beings, including their reasons for such preference. Thus, 20 different water compositions located in Edirne Province were selected, and in 2-min camera reels, the students of various age groups assessed water with various characteristic features via a survey. As a result, it was revealed that human beings from various age groups wish to perform different activities with water elements having distinctive characteristic features, and the types of water elements that are subject to various age groups’ like and dislike were determined. Kruskal–Wallis test was used during testing the effect of age differences. Chi-square analysis was used in order to examine the effect of age differences on preferences with regards to the activities that shall be performed at locations that include utilization of various water elements. The results reveal that while the use of water should be allowed in landscaping, selections regarding the elements of these water features should be made based on the type of activity and the age group of users in relation to the location.     

The effect of vinasse on the growth of Helianthus annuus and Pisum sativum: part I--The effects on some enzymes and chlorophyll and protein content

In this study, the composition of vinasse was first analysed. It was found to contain 8.43% dry matter, 3.3% total ash, 4% crude protein and 0.95% total carbohydrates; BOD load was determined as 63 g litre(-1). Subsequently, the effects of vinasse in various concentrations (1, 2.5, 5, 10, 25, 50, 75 and 100%) on the activity of cellulase and pectin methyl esterase and the chlorophyll and protein contents of Pisum sativum and Helianthus annuus were investigated. The activity of these enzymes and the protein and chlorophyll contents in potted plants showed a gradual increase from the control up to 2.5% concentration of vinasse, but decreased at higher concentrations. These different effects of the effluent may be due to the high BOD load and the presence of cell wall cations in it.     

Oxidative treatment of simulated dyehouse effluent by uv and near-UV light assisted Fenton's reagent

UV/Fenton, near-UV-visible/Fenton, dark Fenton, and H₂O₂/UV reactions have been used to treat simulated dyehouse effluents representing wastewater from the textile dyeing and rinsing process. Experiments were carried out in a lab - scale photochemical reactor using concentrations of 0.5–25 mM H₂O₂, 0.04-0.5 mM Fe²⁺-ion and different dilutions of textile wastewater. To assess the extent of mineralization, decolourization kinetics and the effect of different fight sources on treatment efficiency, DOC, optical density at 254 nm and 600 nm wavelength and residual H₂O₂ concentrations were measured during the course of the advanced oxidation reactions. Comparative evaluation of the obtained results revealed that the decolourization rate increased with applied H₂O₂ and Fe²⁺-ion dose as well as the strength of the synthetic textile wastewater. The best results were obtained by the near - UV/visible/Fenton process with a decolourization rate constant of 1.57 min⁻¹, a UV_254nm reduction of 97% and a DOC removal of 41% at relatively low doses of the H₂O₂ oxidant and Fe²⁺-ion catalyst within 60 min treatment time.     

云南腾冲地区大气降水中氢氧稳定同位素特征

为了揭示腾冲地区降水中氢氧稳定同位素特征,利用2009年1月～2011年12月腾冲地区339个降水样品资料,对降水中的氢、氧同位素组成及其影响因素进行了分析和研究。结果表明：腾冲地区大气降水中δ18O值变化范围为-2678‰～405‰,δD值变化范围为-20095‰～3689‰,均处于全球降水δ18O与δD值变化范围内。天气尺度下,腾冲地区降水中δ18O的变化具有显著的降水量效应以及反温度效应。但是,在季风降水期间,如果相邻两天都有降水发生时,腾冲地区降水中δ18O值变化并不一定遵循“降水量效应”。利用ECMWF（European Centre for Medium Range Weather Forecasts）提供的TCWV（Total Column Water Vapour）再分析资料,发现TCWV与δ18O的日变化存在明显的反位相对应关系。腾冲地区的大气降水线为：δD=818δ18O+1172,斜率与截距均比全球和全国的大气降水线偏大,说明该地区气候湿润多雨。d值分布具有季节差异,在雨季（4～9月）,腾冲地区降水的水汽主要来源于低纬度海洋,空气湿度大,降水中d值较小;在干季（10～3月）,由于受大陆性气团控制,腾冲地区降水的水汽主要来源于西风带的输送以及局地再蒸发水汽的补充,空气湿度小,降水中d值较大     

基于遥感数据的PM2.5与城市化的时空关系研究——以成渝城市群为例

采用1998~2013年卫星遥感影像反演的PM2.5全球高精度产品数据集,结合GIS空间分析、地理加权回归（GWR）以及地理探测器等方法,系统地分析了成渝城市群城市化与PM2.5分布之间的关系。结果表明：（1）1998~2013年成渝城市群城市化速度较快,城市区域的PM2.5均值明显高于非城市区域,说明城市化对PM2.5具有一定的影响;（2）近16 a PM2.5重心与城市重心整体上都向东南方向移动,且两者每年在经度上的波动方向基本相反;（3）夜间灯光数据与PM2.5在空间分布上具有较好的一致性,且1998~2013年两者的GWR全局R2在0.86~0.95之间,相关性显著,研究区内城市化和人类活动对PM2.5的分布具有明显影响;（4）地理探测分析表明不同城市化因子对PM2.5影响差异显著,从2006到2013年城区人口密度和建成区绿化覆盖率逐渐成为成渝城市群PM2.5分布的主要影响因子。