Comparison of two methods for the determination of total organic halogen (TOX) in receiving waters

Two methods for the determination of total organic halogen (TOX), orginating from bleaching of pulp, in receiving waters have been compared. One of the methods (AC/MC) is based on adsorption of the halogenated matter onto an activated carbon sorbent. The halogen is determined by a microcoulometric technique after combustion of the carbon. The other method (XAD/PT) uses an XAD resin as sorbent and the determination of the halogen is carried out by potentiometric titration after a schöniger combustion of the resin eluate.Both methods showed good performance for samples consisting of spent bleach liquors diluted with distilled, fresh and brackish water. The repeatability was very good with a relative standard deviation less than a few per cent. The detection limit of the AC/MC method is about 0.1 μmol/1 and for the XAD/PT method about ten times higher. The AC/MC method gave in most cases 10–20% higher TOX concentrations compared to the XAD/PT method.     

Perfluorinated chemicals in relation to other persistent organic pollutants in human blood

In order to evaluate blood levels of some perfluorinated chemicals (PFCs) and compare them to current levels of classical persistent organic pollutants (POPs) whole blood samples from Sweden were analyzed with respect to 12 PFCs, 37 polychlorinated biphenyls (PCBs), p,p'-dichlorodiphenyl-dichloroethylene (DDE), hexachlorobenzene (HCB), six chlordanes and three polybrominated diphenyl ethers (PBDEs). The median concentration, on whole blood basis, of the sum of PFCs was 20-50 times higher compared to the sum of PCBs and p,p'-DDE, 300-450 times higher than HCB, sum of chlordanes and sum of PBDEs. Estimations of the total body amount of PFCs and lipophilic POPs point at similar body burdens. While levels of for example PCBs and PBDEs are normalized to the lipid content of blood, there is no such general procedure for PFCs in blood. The distributions of a number of perfluorinated compounds between whole blood and plasma were therefore studied. Plasma concentrations were higher than whole blood concentrations for four perfluoroalkylated acids with plasma/whole blood ratios between 1.1 and 1.4, whereas the ratio for perflurooctanesulfonamide (PFOSA) was considerably lower (0.2). This suggests that the comparison of levels of PFCs determined in plasma with levels determined in whole blood should be made with caution. We also conclude that Swedish residents are exposed to a large number of PFCs to the same extent as in USA, Japan, Colombia and the few other countries from which data is available today.     

Partitioning and removal of dioxin-like congeners in flue gases treated with activated carbon adsorption

Activated carbon adsorption is commonly used to control dioxin-like congener (PCDD/Fs and PCBs) emissions. Partitioning of PCDD/Fs and PCBs between vapor and solid phases and their removal efficiencies achieved with existing air pollution control devices (APCDs) at a large-scale municipal waste incinerator (MWI) and an industrial waste incinerator (IWI) are evaluated via intensive stack sampling and analysis. Those two facilities investigated are equipped with activated carbon injection (ACI) with bag filter (BF) and fixed activated carbon bed (FACB) as major PCDD/F control devices, respectively. Average PCDD/F and PCB concentrations of stack gas with ACI+BF as APCDs are 0.031 and 0.006ng-TEQ/Nm(3), and that achieved with FACB are 1.74 and 0.19ng-TEQ/Nm(3) in MWI and IWI, respectively. The results show that FACB could reduce vapor-phase PCDD/Fs and PCBs concentrations in flue gas, while the ACI+BF can effectively adsorb the vapor-phase dioxin-like congener and collect the solid-phase PCDD/Fs and PCBs in the meantime. Additionally, the results of the pilot-scale adsorption system (PAS) experimentation indicate that each gram activated carbon adsorbs 105-115ng-PCDD/Fs and each surface area (m(2)) of activated carbon adsorbs 10-25ng-PCDD/Fs. Based on the results of PAS experimentation, this study confirms that the surface area of mesopore+macropore (20-200A) of the activated carbon is a critical factor affecting PCDD/F adsorption capacity.     

The use of a sequential leaching procedure for assessing the heavy metal leachability in lime waste from the lime kiln at a caustizicing process of a pulp mill

A five-stage sequential leaching procedure was used to fractionate 13 heavy metals (Cd, Cu, Pb, Cr, Zn, Fe, Mn, Al, Ni, Co, As, V, Ba) and sulphur (S) in lime waste from the lime kiln at the causticizing plant of Stora Enso Oyj Veitsiluoto Pulp Mills at Kemi, Northern Finland, into the following fractions: (1) water-soluble fraction (H₂O), (2) exchangeable fraction (CH₃COOH), (3) easily reduced fraction (HONH₃Cl), (4) oxidizable fraction (H₂O₂ + CH₃COONH₄), and (5) residual fraction (HF + HNO₃ + HCl). Although metals were leachable in all fractions, the highest concentrations for most of the metals were observed in the residual fraction (stage 5). It was also notable that the total heavy metal concentrations in lime waste did not exceed the maximal allowable heavy metal concentrations for soil conditioner agents set by the ministry of the Agricultural and Forestry in Finland. The heavy metals concentrations in lime waste were also lower than the maximal allowable heavy metals concentrations of the European Union Directive 86/278/EEC on the protection of environment, and in particular of the soil, when sewage sludge is used in agriculture. The Ca concentration (420 g kg⁻¹; d.w.) was about 262 times higher than the typical value of 1.6 g kg⁻¹ (d.w.) in arable land in Central Finland. However, the concentration Mg (0.2 g kg⁻¹; d.w.) in lime waste was equal to the Mg concentration in arable land in the Central Finland. The lime waste has strongly alkaline pH (12.8) and a neutralizing value (i.e. liming effect) of 47.9% expressed as Ca equivalents (d.w.). This indicates lime waste to be a potential soil conditioner and improvement as well as a pH buffer.     

What is the lesson from the unprecedented event over antarctica in 2002

Varotsos (2002a,b), suggested that both the smaller-sized ozone hole over Antarctica and its splitting in two holes in September 2002 occurred due to an unprecedented major sudden stratospheric warming caused by very strong planetary waves propagated in the southern hemisphere. Subsequently, a NASA press release of December 6, 2002, also reported the prevalence of very strong planetary waves in Antarctica. The aim of this Letter is to further discuss the morphology of the Antarctic ozone hole, to detect the causes that allowed the Antarctic stratosphere to exhibit this exceptional warming and to examine what it denotes about its mechanisms. Concerning the morphology, among the principal findings is that the ozone hole split occurred not only in the stratosphere but extended in the lower altitudes (upper troposphere). As to the causes of the major sudden stratospheric warming of 2002, a comparison with the previous warmings in Antarctica since 1964 is made. The smaller-sized Antarctic ozone hole of 2002 is approximately equal to that of 1988 when a strong sudden stratospheric warming occurred. If only the destruction of ozone by chlorofluorocarbons resulted in the delayed sudden stratospheric warmings in Antarctica, then the early sudden stratospheric warmings of 1988 and 2002 would not have occurred, since chlorofluorocarbon loading of the stratosphere has remained relatively stable in recent years. Furthermore, it appears that the El Nino characteristics in 1988 and 2002 are not similar.     

Environmental impacts of coastal aquaculture in eastern mediterranean bays the case of astakos gulf,Greece

GOAL, SCOPE AND BACKGROUND: Over the last decade Greece has become a leading country in the EU as concerns the cage farming of seabream and seabass. A strong debate has risen, however, about the environmental impacts of aquacultures in the coastal areas. The present paper deals with this problem and it is based on measurements of physico-chemical parameters in the water column, particulate matter and sediments in the area of Astakos Gulf, a coastal embayment in western Greece where three big fish farms are currently operating. METHODS: Water samples were collected by using Hydro-Bios sampling bottles, whereas a prototype sediment trap was installed under a fish cage for the collection of particulate matter. Temperature, dissolved oxygen, pH and salinity were measured in situ using portable equipment. Nutrients were determined by standard spectrophotometric methods. Trace metals were determined by Atomic Absorption Spectrometry. Dissolved organic carbon was determined by a Shimadzu 5000A carbon analyzer, whereas organic carbon in sediments was determined titrimetrically. RESULTS AND DISCUSSION: No clear eutrophication incidents have been identified, although the water column near the fish farms was enriched in nutrients and organic carbon. A sludge 'blanket' covers considerable parts of the seabed and is enriched in colloidal organic carbon and trace metals (Cd, Cu, Fe and Zn) that come from unused fish food. The biodegradation of this sludge leads to the development of anoxic conditions followed by the formation of undesirable gases, precipitation or remobilization of metals and the extinction of benthic fauna. CONCLUSION: The operation of fish farms at the coastal area of Astakos Gulf, and probably in similar Mediterranean gulfs, affects the marine environment, particularly in the vicinity of the cages. The most significant influence concerns the near-bottom water layer. The environmental impacts depend on the amount of food given to fishes, the mode of feeding, the fish density in cages, the annual production and the years of unit operation. The hydrology and the geomorphology of the area are also critical factors for its environmental quality. RECOMMENDATION AND OUTLOOK: The success of the fish-farming sector in the Mediterranean is accompanied by environmental and, in some extents, by social and marketing problems. These problems, derived from the rapid development of fish farming, can be solved only through an integrated management, using methods such as environmental impact assessment, risk assessment, economic evaluation, vulnerability assessments, resource accounting, cost-benefit analysis and outcome-based monitoring.     

Investigation of the complexation of metal-ions by strong ligands in fresh and marine water

SCOPE: The detection and investigation of metal ions bound in strong complexes in natural waters is a difficult task, due to low concentration of the metal ions themselves, and also of the strong ligands, which, moreover, are often not of a well-defined composition. Here, a method is proposed for the investigation of the speciation of metal ions in natural waters. OBJECTIVE AND METHOD: It is based on the sorption of metal ions on strongly sorbing ion exchange resins, i.e. complexing resins. For this reason the method is called Resin Titration. It has been shown in previous investigations that the concentration of metal ion totally sorbed by a particular resin, and its reaction coefficient in the solution phase in the presence of the resin, can be determined from the sorption data using a simple relationship. Here, a data treatment (the Ruzic linearization method) is proposed for also determining the concentration of the ligands responsible for the complex in equilibrium with the resin. RESULTS: The method was applied to data obtained by Resin Titration of a freshwater and a seawater. Copper(II) and aluminium(III) were considered, using Chelex 100 as a titrant, due to its strong sorbing properties towards these metal ions. The results were: the total metal concentration in equilibrium with the resin, the side reaction coefficients, and the concentration of ligands. In all these cases the ligands forming very strong complexes were found to be at concentration lower than that of the metals. CONCLUSION: The Ruzic linearization method allows the determination of the concentration of the ligands forming very strong complexes in equilibrium with Chelex 100. The reaction coefficient was better determined by the calculation method previously proposed for RT. The ligands responsible for the strong complexes were found to be at low concentration, often lower than that of the metal ions considered. The metal in the original sample is partly bound to these ligands, since the complexes are very strong. Only a part of the metal is linked to weaker ligands, or free.     

The potential of vehicle and road infrastructure interventions in fatal bicyclist accidents on Swedish roads—What can in-depth studies tell us?

Abstract

Objective: The objective of this article is to describe the characteristics of fatal crashes with bicyclists on Swedish roads in rural and urban areas and to investigate the potential of bicycle helmets and different vehicle and road infrastructure interventions to prevent them. The study has a comprehensive approach to provide road authorities and vehicle manufacturers with recommendations for future priorities.

Methods: The Swedish Transport Administration’s (STA) in-depth database of fatal crashes was used for case-by-case analysis of fatal cycling accidents (2006–2016) on rural (n?=?82) and urban (n?=?102) roads. The database consists of information from the police, medical journals, autopsy reports, accident analyses performed by STA, and witness statements. The potential of helmet use and various vehicle and road infrastructure safety interventions was determined retrospectively for each case by analyzing the chain of events leading to the fatality. The potential of vehicle safety countermeasures was analyzed based on prognoses on their implementation rates in the Swedish vehicle fleet.

Results: The most common accident scenario on rural roads was that the bicyclist was struck while cycling along the side of the road. On urban roads, the majority of accidents occurred in intersections. Most accidents involved a passenger car, but heavy trucks were also common, especially in urban areas. Most accidents occurred in daylight conditions (73%). Almost half (46%) of nonhelmeted bicyclists would have survived with a helmet. It was assessed that nearly 60% of the fatal accidents could be addressed by advanced vehicle safety technologies, especially autonomous emergency braking with the ability to detect bicyclists. With regard to interventions in the road infrastructure, separated paths for bicyclists and bicycle crossings with speed calming measures were found to have the greatest safety potential. Results indicated that 91% of fatally injured bicyclists could potentially be saved with known techniques. However, it will take a long time for such technologies to be widespread.

Conclusions: The majority of fatally injured bicyclists studied could potentially be saved with known techniques. A speedy implementation of important vehicle safety systems is recommended. A fast introduction of effective interventions in the road infrastructure is also necessary, preferably with a plan for prioritization.     

1985-2005年中国城市水源地突发污染事件不完全统计分析

对1985-2005年中国城市水源地突发污染事件进行了统计分析,以从总体上揭示这些事件的发生规律及其对城市水源地和供水安全的危害.采用文献检索方法,通过对1985-2005年<中国环境报>、<人民日报>、新华网等报刊和网络的检索,从发生日期、地点、污染物种类、事件简况4个方面统计中国城市水源地突发污染事件,经整理和筛选后共列出102起.这些突发污染事件的分析结果表明:1)中国城市水源地突发污染事件总体上呈数量逐年增多,危害增大的趋势;2)化学品和污水是主要污染物;3)河道交通事故和工厂泄漏事故是主要风险源;4)突发污染事件一般都造成了比较严重的经济社会影响,但缺乏相应的应急管理机制和应急部门;5)3个典型突发污染事件造成重大经济社会损失并引发社会高度关注,凸现了构建中国城市水源地突发污染事件应急机制的重要性和迫切性.     

Critical loads for Finnish lakes: comparison of three steady-state models

Three simple steady-state water-chemistry models are used to calculate critical loads of sulfur for lakes in Finland. Because of the high concentrations of organic matter in Finnish lakes, the influence of organic anions on the calculation of critical loads has been given special attention. The first two methods are well known ion-balance methods which have been used in many previous lake-acidification studies. The third method, developed for this study, includes the numerical solution of equilibrium equations for organic anions, inorganic carbon species and inorganic monomeric aluminum. The original pH and aluminum concentration of the lakes are estimated with this model, and a method to estimate the original acid neutralizing capacity (ANC) by simulating a Gran-titration is also tested on the lake data. Uncertainty in the predictions is estimated by varying the most critical model parameters.