化学工程固沙在塔里木沙漠公路沙害防治中的适宜性

由于天然材料日益紧缺 ,研制适宜于流动性沙漠地区公路沙害防治的人工替代材料势在必行 .结合塔里木沙漠公路沙害环境 ,实验室优选出 L VA、LVP、WBS和 STB 4种抗性较好的固沙剂 ,对其理化性能、粘结体力学性能和抗风蚀性能等测试结果表明 :颗粒粒径 0.2μm～ 0.5μm,粘度 12 Pa·s～ 15Pa·s;10℃～70℃温度下无沉淀 ,不燃烧 ;实验抗压强度 1.0 MPa～12.1 MPa;10℃～-20℃低温下重量损失率 0%～ 1.8%;紫外光照射 300h强度损失率 0%～ 42%;在 5m·s^-1～253m·s^-1实验风速下 ,风蚀量 0g·(106cm²·h)^-1～4.0 g·(106cm²·h)^-1 ;现场试验固结层厚度 0.2 mm～0.5mm,强度高 .化学工程固沙技术适宜于塔里木沙漠公路沙害防治 .     

水平潜流人工湿地对污水中有机物的降解特性

采用芦苇-砾石(W1)、组合植物-砾石(W2)和芦苇-组合填料(W3)3种不同类型的水平潜流人工湿地系统处理受污染水体.当进水COD为44～96mg/L,HRT≥2d时,3个系统出水COD均<30mg/L,达到地表水环境Ⅳ类水体COD标准.W2系统在HRT≥4d时,出水COD<20mg/L,达到Ⅲ类水体COD标准.有机物降解速率依次为W2>W3>W1.GC/MS分析表明,与W1相比较,W2和W3出水中有机物的碳原子数、分子量和化合物组成类似,对污染物向低碳小分子迁移转化更为彻底.运用PCR-DGGE技术考察不同湿地系统中微生物种群及其分布特征表明,不同类型湿地系统中水生植物和填料种类及空间位置对微生物群落结构具有显著的影响.     

一株受二噁英类化合物诱导表达绿色荧光蛋白的胃癌细胞系的建立

将人工合成的5个相连的XRE(Xeobiotic response element)和minimal CMV(Human cytomegalovirus)启动子,插入载体pEGFP-1,构建得到载体pXRE5-EGFP.以pXRE5-EGFP转染人胃癌细胞SGC-7901,经过筛选得到一株受2,3,7,8-四氯代二苯并二英(2,3,7,8-tetrachlorodibenzo-p-dioxin,TCDD)诱导表达绿色荧光蛋白的细胞系XRE5-SGC-7901.将XRE5-SGC-7901细胞株暴露于不同浓度TCDD(0、250、500pg·mL-1)中,发现TCDD暴露组XRE5-SGC-7901细胞中绿色荧光蛋白的表达量显著升高,且与TCDD暴露浓度呈正相关.新构建的细胞株具有二英类化合物诱导表达绿色荧光蛋白的功能.     

臭氧-固定化生物活性炭滤池深度处理石化废水的试验研究

针对石化废水中不同特征污染物,采用人工分离筛选去除COD和油工程菌6株、硝化工程菌10株(亚硝化细菌5株、硝化细菌5株)构建高效混合菌群,通过臭氧固定化生物活性炭滤池除污染效能中试研究表明,该系统深度处理石化难降解有机废水是可行的,能同时实现去除COD、油类、NH3 N等污染物的功效,对COD、油类、NH3 N和色度的平均去除率分别为73 0%、90 5%、81 2%和90%,相应的出水分别为33 2mg/L、0 4mg/L、4 5mg/L和10倍,各项指标均达到了国家循环冷却水的用水要求,它的推广应用必将带来显著的环境效益、社会效益和经济效益。     

RuO2/La2O3/TiO2悬浮体系中直接耐晒黑G的光催化降解

钛酸丁酯为前驱体,采用溶胶-凝胶-浸渍法制备RuO2/La2O3/TiO2复合光催化剂,以紫外灯为光源,研究了催化剂组成、煅烧温度、溶液pH值等因素对直接耐晒黑G(DFBG)光催化降解的影响.结果表明掺杂量w(La2O3)1.39%、w(RuO2)0.12%、煅烧温度500℃(2 h)、溶液pH值7.3时,光催化活性最佳.当通气量为200 mL/min,催化剂投加量为150mg时,50 mg/L的DFBG溶液经60 min降解,其降解率近100%.DFBG的光催化降解服从Langmuir-Hinshelwood动力学模型,测得相应的动力学参数k=7.42×10-3mmol/L·min,K=19.54 L/mmol.     

Pd/CZ/Al2O3催化剂的制备、表征与三效催化性能

以共浸渍法制得的氧化铝负载铈锆固溶体为载体,并浸渍贵金属Pd得到了Pd/CZ/Al2O3催化剂.实验结果表明,该催化剂在老化前后都表现出良好的三效催化活性,新鲜样品Pd/CZ/Al2O3活性与Pd/CZ相当,老化后样品前者优于后者.结合XRD,BET,TPR等表征手段,讨论了Pd/CZ/Al2O3的催化活性特别是高温老化后活性与其组成结构之间的内在关系,揭示了其老化后仍具有较高活性的主要原因在于保持了Pd与CZ/Al2O3复合载体之间的强相互作用(SMSI).     

Aging activity of DDE in dissimilar rice soils in a greenhouse experiment

A green-house study was conducted in late 2005 to investigate the aging behavior of p,p'-DDE in two types of soil, Hydragric Anthrosols (An) and Hydragric Acrisols (Ac), according to the World Reference Base (WRB) [FAO/ISRIC/ISSS. 1998. World reference base for soil resources. World soil resources reports, Rome. p. 87]. Paddy rice and dry rice were grown in submerged paddy soils and non-submerged upland soils, respectively. The concentration of extractable p,p'-DDE in fresh DDE-spiked soils was 746.2ngg(-1). During the first few weeks of the experiment, the extractability of p,p'-DDE became increasingly low as the aging period prolonged. However, certain amount of p,p'-DDE that had been captured by soil minerals and organic matter (OM) could be released and became extractable in the later period. The extractability of p,p'-DDE in submerged soils was significantly lower than that in non-submerged soil, because flooding could increase the binding of pollutants to soil particles. The plantation of both dry rice and paddy rice slowed down the aging process of p,p'-DDE. After one month's growth of rice, p,p'-DDE bound to soil particles was released and became extractable. The OM and silt content of An are higher than that of Ac, resulting in more bound residues and relative lower extractability of p,p'-DDE in An. In addition, the extractability of p,p'-DDE could be reduced by the addition of rice straw to soils.     

Non-microcystin producing Microcystis wesenbergii (Komárek) Komárek (Cyanobacteria) representing a main waterbloom-forming species in Chinese waters

It is well known that several morphospecies of Microcystis, such as Microcystis aeruginosa (Kützing) Lemmermann and Microcystis viridis (A. Brown) Lemmermann can produce hepatotoxic microcystins. However, previous studies gave contradictory conclusions about microcystin production of Microcystis wesenbergii (Komárek) Komárek. In the present study, ten Microcystis morphospecies were identified in waterblooms of seven Chinese waterbodies, and Microcystis wesenbergii was shown as the dominant species in these waters. More than 250 single colonies of M. wesenbergii were chosen, under morphological identification, to examine whether M. wesenbergii produce hepatotoxic microcystin by using multiplex PCR for molecular detection of a region (mcyA) of microcystin synthesis genes, and chemical analyses of microcystin content by ELISA and HPLC for 21 isolated strains of M. wesenbergii from these waters were also performed. Both molecular and chemical methods demonstrated that M. wesenbergii from Chinese waters did not produce microcystin.     

漂浮负载型光催化剂制备及降解草甘膦研究

以漂珠(FP)为载体,采用溶胶-凝胶-浸渍法制备了漂浮负载型CdS/TiO2/FP复合膜光催化剂,通过SEM、XRD对其结构进行了表征.以甘草膦农药的光催化降解为模型反应,使用不同光源研究了CdS/TiO2/FP的光催化性能,探讨了影响催化剂活性的因素及采用太阳光做光源处理草甘膦的可行性.结果表明,经4层镀膜500℃热处理的20%(w/w)CdS/TiO2/FP光催化剂具有良好的光催化性能,最佳降解条件为:催化剂加入量3 g/L,初始pH 7～9,Fe2 浓度为2.0×10-3 mol/L.通气量200 mL/min.在最佳条件下,对135 mg/L草甘膦溶液降解率可以分别达到96.3%(125 W高压汞灯,60 min)和82.4%(太阳光,180 min).     

Mathematical modelling of sewage sludge incineration in a bubbling fluidised bed with special consideration for thermally-thick fuel particles

Fluidised bed combustor (FBC) is one of the key technologies for sewage sludge incineration. In this paper, a mathematical model is developed for the simulation of a large-scale sewage sludge incineration plant. The model assumes the bed consisting of a fast-gas phase, an emulsion phase and a fuel particle phase with specific consideration for thermally-thick fuel particles. The model further improves over previous works by taking into account throughflow inside the bubbles as well as the floating and random movement of the fuel particles inside the bed. Validation against both previous lab-scale experiments and operational data of a large-scale industrial plant was made. Calculation results indicate that combustion split between the bed and the freeboard can range from 60/40 to 90/10 depending on the fuel particle distribution across the bed height under the specific conditions. The bed performance is heavily affected by the variation in sludge moisture level. The response time to variation in feeding rate is different for different parameters, from 6min for outlet H(2)O, 10min for O(2), to 34min for bed temperature.