Studies on cadmium toxicity in plants: a review

This review emphasises cadmium toxicity on plants with regards to ecological, physiological and biochemical aspects. Cadmium toxicity in plants and problems concerning tolerance and ecological performance are discussed briefly. Efforts have been made to compare the relative sensitivity of various plant groups including micro-and macro-flora. This review may help in interdisciplinary studies to assess the ecological significance of metal stress.     

Numerical and experimental investigation of state of health of Li-ion battery

ABSTRACT

Estimation of State of Health (SoH) of Lithium-ion (Li-ion) battery is essential to predict the lifespan of batteries of an electric vehicle (EV). The efficient prediction of battery health indicates to the effective and safe operation of EV. However, delivering an effective and accurate method for the estimation of SoH in the real condition is truly a challenging task. The present study proposed a holistic procedure of combining both experimental and numerical investigations to conduct the fundamental study on coupled mechanical-electrochemical behavior of Li-ion battery. The proposed investigation highlighted the effect of stress on the capacity of the battery, considering capacity fade as an equivalent parameter to its health for real-time estimation of SoH. Finally, a simple model of Artificial Neural Network (ANN) is provided, which shows the linear dependency of stress with the SoH. The results obtained from the ANN model are validated with a Linear Regression (LR) model for a better understanding of the inspection. The predicted value of mean Square Error (MSE) and R square error in the ANN training model are found to be 0.000309 and 0.849687, respectively. Whereas for the test model, these predicted values are found to be 0.000438 and 0.819347, respectively.     

Biohythane production from organic wastes: present state of art

The economy of an industrialized country is greatly dependent on fossil fuels. However, these nonrenewable sources of energy are nearing the brink of extinction. Moreover, the reliance on these fuels has led to increased levels of pollution which have caused serious adverse impacts on the environment. Hydrogen has emerged as a promising alternative since it does not produce CO₂ during combustion and also has the highest calorific value. The biohythane process comprises of biohydrogen production followed by biomethanation. Biological H₂ production has an edge over its chemical counterpart mainly because it is environmentally benign. Maximization of gaseous energy recovery could be achieved by integrating dark fermentative hydrogen production followed by biomethanation. Intensive research work has already been carried out on the advancement of biohydrogen production processes, such as the development of suitable microbial consortium (mesophiles or thermophiles), genetically modified microorganism, improvement of the reactor designs, use of different solid matrices for the immobilization of whole cells, and development of two-stage process for higher rate of H₂ production. Scale-up studies of the dark fermentation process was successfully carried out in 20- and 800-L reactors. However, the total gaseous energy recovery for two stage process was found to be 53.6 %. From single-stage H₂ production, gaseous energy recovery was only 28 %. Thus, two-stage systems not only help in improving gaseous energy recovery but also can make biohythane (mixture of H₂ and CH₄) concept commercially feasible.     

Effect of vermicomposting on calcium, sulphur and some heavy metal content of different biodegradable organic wastes under liming and microbial inoculation

A study was conducted to evaluate the changes in total calcium and sulphur and some heavy metal (Zn, Cu, and Pb) concentration of different organic wastes affected by liming and microorganism inoculation. Vermicomposting was an effective technology for disposal of organic substrates like municipal solid wastes (MSW), possessing comparatively higher concentration of heavy metals. The addition of lime in initial organic substrates significantly (P ≤ 0.05) increased total calcium and total sulphur content of vermicomposts. Inoculation of microorganisms significantly (P ≤ 0.05) reduced the heavy metal content of final products as compared to control. Fungal strains were comparatively more effective in detoxification of heavy metals than B. polymyxa.     

Fractionation and speciation of arsenic in three tea gardens soil profiles and distribution of As in different parts of tea plant (Camellia sinensis L.)

The distribution pattern and fractionation of arsenic (As) in three soil profiles from tea (Camellia sinensis L.) gardens located in Karbi-Anglong (KA), Cachar (CA) and Karimganj (KG) districts in the state of Assam, India, were investigated depth-wise (0-10, 10-30, 30-60 and 60-100 cm). DTPA-extractable As was primarily restricted to surface horizons. Arsenic speciation study showed the presence of higher As(V) concentrations in the upper horizon and its gradual decrease with the increase in soil depths, following a decrease of Eh. As fractionation by sequential extraction in all the soil profiles showed that arsenic concentrations in the three most labile fractions (i.e., water-soluble, exchangeable and carbonate-bound fractions) were generally low. Most arsenic in soils was nominally associated with the organic and Fe-Mn oxide fractions, being extractable in oxidizing or reducing conditions. DTPA-extractable As (assumed to represent plant-available As) was found to be strongly correlated to the labile pool of As (i.e. the sum of the first three fractions). The statistical comparison of means (two-sample t-test) showed the presence of significant differences between the concentrations of As(III) and As(V) for different soil locations, depths and fractions. The risk assessment code (RAC) was found to be below the pollution level for all soils. The measurement of arsenic uptake by different parts of tea plants corroborated the hypothesis that roots act as a buffer and hold back contamination from the aerial parts.     

Persistence of herbicide fenoxaprop ethyl and its acid metabolite in soil and wheat crop under Indian tropical conditions

The persistence of fenoxaprop ethyl {Ethyl (RS)-2-[4-(6-chloro-1,3-benzoxazol-2-yloxy) phenoxy] propionate} herbicide and its active metabolite fenoxaprop acid was investigated in soil and wheat crop. Fenoxaprop acid was prepared by alkaline hydrolysis of fenoxaprop ethyl. A HPLC method was developed in which fenoxaprop ethyl herbicide and its acid metabolite showed sharp single peak at 6.44 and 2.61 min respectively. The sensitivity of the method for ester and acid was 2 and 1 ng respectively with limit of detection of 0.1 and 0.05 μg mL^?1. The recovery of fenoxaprop ethyl and fenoxaprop acid from soil, wheat straw and grain ranged between 73.8–80.2%. In a field experiment fenoxaprop ethyl (Puma super® 10 EC) when applied to wheat crop at the rate of 120 g and 240 g a.i. ha^-1 as post emergence spray, fenoxaprop ethyl converted to fenoxaprop acid. Residues of fenoxaprop ethyl and acid dissipated in soil with a half-life of 0.5 and 7.3 days, respectively. At harvest no detectable residues of fenoxaprop ethyl or acid were observed in soil, wheat grain and straw samples.     

Updraft gasification of juniper wood biomass using CO2–O2 and Air (N2–O2)

Biomass gasification is being considered as one of the most promising technologies for converting low-quality solid biomass fuel into gaseous fuel. Redberry juniper (Juniperus pinchotii), one of the woody species that dominate uncultivated lands in the southern great plains, USA, may have a great potential for bioenergy utilization. In this study, the results of gasification of juniper are presented. Juniper wood chips were gasified in an adiabatic fixed bed updraft gasifier using air and the mixture gas of carbon dioxide and oxygen (CO₂:O₂) as gasification medium. The effect of gasification parameters such as moisture contents, gasification mediums, and gasification temperature on produced gas properties and the tar yield were investigated. It was observed that oxy fuel gasification (the reaction of woody fuels with carbon dioxide) of juniper resulted in the increase of production of carbon monoxide, especially at higher peak gasification temperatures. As a result, the CO₂ gasification resulted in producing higher heating value gas (6264 kJ/nm³ with dilution of CO₂ and 19,750 kJ/nm³ inert free) compared to air gasification. For air gasification, it was observed that the updraft gasification produced large amount of the tar in the product gas (more than 100 g/nm³) for the fuels with moisture content between 6% and 11%. Generally, the tar yield increased with the increase of equivalence ratio (er) and moisture content. However, when the fuel moisture content reached 23.5%, the tar yield reduced significantly due low gasification temperature which reduced the less tar cracking.     

Soil application of dinitroaniline and arylphenoxy propionic herbicides influences the activities of phosphate-solubilizing microorganisms in soil

An experiment was conducted under laboratory conditions to investigate the effect of two systemic herbicides, viz. pendimethalin (a dinitroaniline) and quizalofop (an arylphenoxy propionic acid) at their recommended field application rates (1.0?kg and 50?g active ingredient per hectare, respectively), either separately or in a combination, on growth and activities of phosphate-solubilizing microorganisms in relation to their effects on biochemical transformations and availability of organic carbon, total and available phosphorus in a Typic Haplustept soil of West Bengal, India. Application of herbicides, in general, significantly stimulated the growth and activities of phosphate-solubilizing microorganisms which increased microbial biomass resulting in higher accumulation of oxidizable organic carbon, total and available phosphorus in soil as compared to untreated control. The combined application of both the herbicides highly stimulated the proliferations of phosphate-solubilizing microorganisms, while pendimethalin alone significantly accentuated phosphate-solubilizing capacities 36.4% as compared to untreated control and retained highest amount of total phosphorus due to greater microbial activities in soil. The separate application of quizalofop also manifested an induced effect on the proliferations of phosphate-solubilizing microorganisms and accounted significant amounts of organic carbon and available phosphorus in the soil system. The results of the present study thus indicated that the cited herbicides at their field application rates can be safely used to eradicate weeds in the crop fields.     

Adaptive nitrogen and integrated weed management in conservation agriculture: impacts on agronomic productivity,greenhouse gas emissions,and herbicide residues

Increasing nitrogen (N) immobilization and weed interference in the early phase of implementation of conservation agriculture (CA) affects crop yields. Yet, higher fertilizer and herbicide use to improve productivity influences greenhouse gase emissions and herbicide residues. These tradeoffs precipitated a need for adaptive N and integrated weed management in CA-based maize (Zea mays L.)—wheat [Triticum aestivum (L.) emend Fiori & Paol] cropping system in the Indo-Gangetic Plains (IGP) to optimize N availability and reduce weed proliferation. Adaptive N fertilization was based on soil test value and normalized difference vegetation index measurement (NDVM) by GreenSeeker? technology, while integrated weed management included brown manuring (Sesbania aculeata L. co-culture, killed at 25 days after sowing), herbicide mixture, and weedy check (control, i.e., without weed management). Results indicated that the ‘best-adaptive N rate’ (i.e., 50% basal + 25% broadcast at 25 days after sowing + supplementary N guided by NDVM) increased maize and wheat grain yields by 20 and 14% (averaged for 2 years), respectively, compared with whole recommended N applied at sowing. Weed management by brown manuring (during maize) and herbicide mixture (during wheat) resulted in 10 and 21% higher grain yields (averaged for 2 years), respectively, over the weedy check. The NDVM in-season N fertilization and brown manuring affected N₂O and CO₂ emissions, but resulted in improved carbon storage efficiency, while herbicide residuals in soil were significantly lower in the maize season than in wheat cropping. This study concludes that adaptive N and integrated weed management enhance synergy between agronomic productivity, fertilizer and herbicide efficiency, and greenhouse gas mitigation.